Commit b4e85d0f authored by Ilya Yanok's avatar Ilya Yanok Committed by Jean-Christophe PLAGNIOL-VILLARD
Browse files

qong: changes to Dave/DENX Qong configuration



1. Changes to the default environment:
  - "bootcmd" defined as "run flash_self"
  - "saveenv" command removed from "update"
  - "uboot" changed to "u-boot" (also in "load")
  - "addmtd" variable defined (and added to all boot commands)
2. CONFIG_CMD_JFFS2 defined to enable "mtdparts" command
3. MTDIDS_DEFAULT and MTDPARTS_DEFAULT defined
4. CONFIG_SYS_CBSIZE changed from 256 to 512. That solves the problem
with truncated "bootargs" environment variable.
Signed-off-by: default avatarIlya Yanok <yanok@emcraft.com>
parent 0d19f6c8
......@@ -84,6 +84,7 @@
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_CMD_JFFS2
/*
* You can compile in a MAC address and your custom net settings by using
......@@ -113,28 +114,29 @@
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs}" \
" console=ttymxc0,${baudrate}\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addmisc=setenv bootargs ${bootargs}\0" \
"uboot_addr=a0000000\0" \
"kernel_addr=a0080000\0" \
"ramdisk_addr=a0300000\0" \
"uboot=qong/u-boot.bin\0" \
"u-boot=qong/u-boot.bin\0" \
"kernel_addr_r=80800000\0" \
"hostname=qong\0" \
"bootfile=qong/uImage\0" \
"rootpath=/opt/eldk-4.2-arm/armVFP\0" \
"flash_self=run ramargs addip addtty addmisc;" \
"flash_self=run ramargs addip addtty addmtd addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_nfs=run nfsargs addip addtty addmisc;" \
"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
"bootm ${kernel_addr}\0" \
"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
"run nfsargs addip addtty addmisc;" \
"run nfsargs addip addtty addmtd addmisc;" \
"bootm\0" \
"load=tftp ${loadaddr} ${uboot}\0" \
"bootcmd=run flash_self\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \
" +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \
" +${filesize};cp.b ${fileaddr} " \
xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize};" \
"setenv filesize;saveenv\0" \
xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
"upd=run load update\0" \
/*
......@@ -142,7 +144,7 @@
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
......@@ -211,5 +213,9 @@
* JFFS2 partitions
*/
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
#define MTDPARTS_DEFAULT \
"mtdparts=physmap-flash.0:256k(U-Boot),128k(env1)," \
"128k(env2),2560k(kernel),13m(ramdisk),-(user)"
#endif /* __CONFIG_H */
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment