Commit b5e7586a authored by Michael Heimpold's avatar Michael Heimpold Committed by Stefano Babic

mxs: mxsboot: fix endianess for sd boot images

Running mxsboot on a big-endian system produces a sd image which
cannot be started by the i.MX28 ROM. It complains on the debug
uart as following:
0x8020a009
          0x80502008
0x8020a009
          0x80502008
...

Enforcing all fields within the BCB to little-endian make
the image bootable again.
Signed-off-by: default avatarMichael Heimpold <mhei@heimpold.de>
Acked-by: default avatarStefano Babic <sbabic@denx.de>
Acked-by: default avatarMarek Vasut <marex@denx.de>
parent 1a8150d4
......@@ -7,6 +7,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
#include <endian.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/types.h>
......@@ -556,15 +557,15 @@ static int mx28_create_sd_image(int infd, int outfd)
cb = (struct mx28_sd_config_block *)buf;
cb->signature = 0x00112233;
cb->primary_boot_tag = 0x1;
cb->secondary_boot_tag = 0x1;
cb->num_copies = 1;
cb->drv_info[0].chip_num = 0x0;
cb->drv_info[0].drive_type = 0x0;
cb->drv_info[0].tag = 0x1;
cb->drv_info[0].first_sector_number = sd_sector + 4;
cb->drv_info[0].sector_count = (size - 4) / 512;
cb->signature = htole32(0x00112233);
cb->primary_boot_tag = htole32(0x1);
cb->secondary_boot_tag = htole32(0x1);
cb->num_copies = htole32(1);
cb->drv_info[0].chip_num = htole32(0x0);
cb->drv_info[0].drive_type = htole32(0x0);
cb->drv_info[0].tag = htole32(0x1);
cb->drv_info[0].first_sector_number = htole32(sd_sector + 4);
cb->drv_info[0].sector_count = htole32((size - 4) / 512);
wr_size = write(outfd, buf, size);
if (wr_size != size) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment