Commit b7702622 authored by Gabriel Huau's avatar Gabriel Huau Committed by Albert ARIBAUD
Browse files

ARM : Add support for MINI2440 (s3c2440).

Support of the MINI2440 board from FriendlyARM from
an old version of u-boot :
http://repo.or.cz/r/u-boot-openmoko/mini2440.git



Currently, supporting only boot from NOR.
Signed-off-by: default avatarGabriel Huau <contact@huau-gabriel.fr>
parent 5d889ae7
......@@ -255,6 +255,10 @@ Klaus Heydeck <heydeck@kieback-peter.de>
KUP4K MPC855
KUP4X MPC859
Gabriel Huau <contact@huau-gabriel.fr>
mini2440 s3c2440
Gary Jennejohn <garyj@denx.de>
quad100hd PPC405EP
......
#
# (C) Copyright 2012
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
COBJS := mini2440.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2009
* Michel Pollet <buserror@gmail.com>
*
* (C) Copyright 2012
* Gabriel Huau <contact@huau-gabriel.fr>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/s3c2440.h>
#include <asm/arch/iomux.h>
#include <asm/arch/gpio.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <netdev.h>
#include "mini2440.h"
DECLARE_GLOBAL_DATA_PTR;
static inline void pll_delay(unsigned long loops)
{
__asm__ volatile ("1:\n"
"subs %0, %1, #1\n"
"bne 1b" : "=r" (loops) : "0" (loops));
}
int board_early_init_f(void)
{
struct s3c24x0_clock_power * const clk_power =
s3c24x0_get_base_clock_power();
/* to reduce PLL lock time, adjust the LOCKTIME register */
clk_power->locktime = 0xFFFFFF; /* Max PLL Lock time count */
clk_power->clkdivn = CLKDIVN_VAL;
/* configure UPLL */
clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
/* some delay between MPLL and UPLL */
pll_delay(100);
/* configure MPLL */
clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
/* some delay between MPLL and UPLL */
pll_delay(10000);
return 0;
}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* IOMUX Port H : UART Configuration */
gpio->gphcon = IOMUXH_nCTS0 | IOMUXH_nRTS0 | IOMUXH_TXD0 | IOMUXH_RXD0 |
IOMUXH_TXD1 | IOMUXH_RXD1 | IOMUXH_TXD2 | IOMUXH_RXD2;
gpio_direction_output(GPH8, 0);
gpio_direction_output(GPH9, 0);
gpio_direction_output(GPH10, 0);
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR;
return 0;
}
int dram_init(void)
{
struct s3c24x0_memctl *memctl = s3c24x0_get_base_memctl();
/*
* Configuring bus width and timing
* Initialize clocks for each bank 0..5
* Bank 3 and 4 are used for DM9000
*/
writel(BANK_CONF, &memctl->bwscon);
writel(B0_CONF, &memctl->bankcon[0]);
writel(B1_CONF, &memctl->bankcon[1]);
writel(B2_CONF, &memctl->bankcon[2]);
writel(B3_CONF, &memctl->bankcon[3]);
writel(B4_CONF, &memctl->bankcon[4]);
writel(B5_CONF, &memctl->bankcon[5]);
/* Bank 6 and 7 are used for DRAM */
writel(SDRAM_64MB, &memctl->bankcon[6]);
writel(SDRAM_64MB, &memctl->bankcon[7]);
writel(MEM_TIMING, &memctl->refresh);
writel(BANKSIZE_CONF, &memctl->banksize);
writel(B6_MRSR, &memctl->mrsrb6);
writel(B7_MRSR, &memctl->mrsrb7);
gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_SIZE);
return 0;
}
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_DRIVER_DM9000
return dm9000_initialize(bis);
#else
return 0;
#endif
}
#ifndef __MINI2440_BOARD_CONF_H__
#define __MINI2440_BOARD_CONF_H__
/* PLL Parameters */
#define CLKDIVN_VAL 7
#define M_MDIV 0x7f
#define M_PDIV 0x2
#define M_SDIV 0x1
#define U_M_MDIV 0x38
#define U_M_PDIV 0x2
#define U_M_SDIV 0x2
/* BWSCON */
#define DW8 0x0
#define DW16 0x1
#define DW32 0x2
#define WAIT (0x1<<2)
#define UBLB (0x1<<3)
#define B1_BWSCON (DW32)
#define B2_BWSCON (DW16)
#define B3_BWSCON (DW16 + WAIT + UBLB)
#define B4_BWSCON (DW16 + WAIT + UBLB)
#define B5_BWSCON (DW16)
#define B6_BWSCON (DW32)
#define B7_BWSCON (DW32)
/*
* Bank Configuration
*/
#define B0_Tacs 0x0 /* 0clk */
#define B0_Tcos 0x0 /* 0clk */
#define B0_Tacc 0x7 /* 14clk */
#define B0_Tcoh 0x0 /* 0clk */
#define B0_Tah 0x0 /* 0clk */
#define B0_Tacp 0x0 /* 0clk */
#define B0_PMC 0x0 /* normal */
#define B1_Tacs 0x0
#define B1_Tcos 0x0
#define B1_Tacc 0x7
#define B1_Tcoh 0x0
#define B1_Tah 0x0
#define B1_Tacp 0x0
#define B1_PMC 0x0
#define B2_Tacs 0x0
#define B2_Tcos 0x0
#define B2_Tacc 0x7
#define B2_Tcoh 0x0
#define B2_Tah 0x0
#define B2_Tacp 0x0
#define B2_PMC 0x0
#define B3_Tacs 0x0
#define B3_Tcos 0x3 /* 4clk */
#define B3_Tacc 0x7
#define B3_Tcoh 0x1 /* 1clk */
#define B3_Tah 0x3 /* 4clk */
#define B3_Tacp 0x0
#define B3_PMC 0x0
#define B4_Tacs 0x0
#define B4_Tcos 0x3
#define B4_Tacc 0x7
#define B4_Tcoh 0x1
#define B4_Tah 0x3
#define B4_Tacp 0x0
#define B4_PMC 0x0
#define B5_Tacs 0x0
#define B5_Tcos 0x0
#define B5_Tacc 0x7
#define B5_Tcoh 0x0
#define B5_Tah 0x0
#define B5_Tacp 0x0
#define B5_PMC 0x0
/*
* SDRAM Configuration
*/
#define SDRAM_MT 0x3 /* SDRAM */
#define SDRAM_Trcd 0x0 /* 2clk */
#define SDRAM_SCAN_9 0x1 /* 9bit */
#define SDRAM_SCAN_10 0x2 /* 10bit */
#define SDRAM_64MB ((SDRAM_MT<<15) + (SDRAM_Trcd<<2) + (SDRAM_SCAN_9))
/*
* Refresh Parameter
*/
#define REFEN 0x1 /* Refresh enable */
#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
#define Trp 0x1 /* 3clk */
#define Trc 0x3 /* 7clk */
#define Tchr 0x0 /* unused */
#define REFCNT 1012 /* period=10.37us, HCLK=100Mhz, (2048 + 1-10.37*100) */
/*
* MRSR Parameter
*/
#define BL 0x0
#define BT 0x0
#define CL 0x3 /* 3 clocks */
#define TM 0x0
#define WBL 0x0
/*
* BankSize Parameter
*/
#define BK76MAP 0x2 /* 128MB/128MB */
#define SCLK_EN 0x1 /* SCLK active */
#define SCKE_EN 0x1 /* SDRAM power down mode enable */
#define BURST_EN 0x1 /* Burst enable */
/*
* Register values
*/
#define BANK_CONF ((0 + (B1_BWSCON<<4) + (B2_BWSCON<<8) + (B3_BWSCON<<12) + \
(B4_BWSCON<<16) + (B5_BWSCON<<20) + (B6_BWSCON<<24) + \
(B7_BWSCON<<28)))
#define B0_CONF ((B0_Tacs<<13) + (B0_Tcos<<11) + (B0_Tacc<<8) + \
(B0_Tcoh<<6) + (B0_Tah<<4) + (B0_Tacp<<2) + (B0_PMC))
#define B1_CONF ((B1_Tacs<<13) + (B1_Tcos<<11) + (B1_Tacc<<8) + \
(B1_Tcoh<<6) + (B1_Tah<<4) + (B1_Tacp<<2) + (B1_PMC))
#define B2_CONF ((B2_Tacs<<13) + (B2_Tcos<<11) + (B2_Tacc<<8) + \
(B2_Tcoh<<6) + (B2_Tah<<4) + (B2_Tacp<<2) + (B2_PMC))
#define B3_CONF ((B3_Tacs<<13) + (B3_Tcos<<11) + (B3_Tacc<<8) + \
(B3_Tcoh<<6) + (B3_Tah<<4) + (B3_Tacp<<2) + (B3_PMC))
#define B4_CONF ((B4_Tacs<<13) + (B4_Tcos<<11) + (B4_Tacc<<8) + \
(B4_Tcoh<<6) + (B4_Tah<<4) + (B4_Tacp<<2) + (B4_PMC))
#define B5_CONF ((B5_Tacs<<13) + (B5_Tcos<<11) + (B5_Tacc<<8) + \
(B5_Tcoh<<6) + (B5_Tah<<4) + (B5_Tacp<<2) + (B5_PMC))
#define MEM_TIMING (REFEN<<23) + (TREFMD<<22) + (Trp<<20) + \
(Trc<<18) + (Tchr<<16) + REFCNT
#define BANKSIZE_CONF (BK76MAP) + (SCLK_EN<<4) + (SCKE_EN<<5) + (BURST_EN<<7)
#define B6_MRSR (CL<<4)
#define B7_MRSR (CL<<4)
#endif
......@@ -67,6 +67,7 @@ mx1ads arm arm920t - -
scb9328 arm arm920t - - imx
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695
mini2440 arm arm920t mini2440 friendlyarm s3c24x0
VCMA9 arm arm920t vcma9 mpl s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
omap1510inn arm arm925t - ti
......
U-Boot for FriendlyARM Mini2440 (s3c2440)
This file contains information for the port of U-Boot to FriendlyARM
mini2440
All information about the board can be found on :
http://www.friendlyarm.net/products/mini2440
To build u-boot : ./MAKEALL mini2440
Overview :
--------
FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440
ARM9 processor. The board measures 100 x 100 mm, ideal for learning about ARM9
systems. It's a low cost board.
Boot Methods :
------------
Mini2440 can boot from NOR or NAND.
Build :
-----
./MAKEALL mini2440
or
make mini2440_config
make
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
* Gary Jennejohn <gj@denx.de>
* David Mueller <d.mueller@elsoft.ch>
*
* (C) Copyright 2009-2010
* Michel Pollet <buserror@gmail.com>
*
* (C) Copyright 2012
* Gabriel Huau <contact@huau-gabriel.fr>
*
* Configuation settings for the MINI2440 board.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_SYS_TEXT_BASE 0x0
#define CONFIG_S3C2440_GPIO
/*
* High Level Configuration Options
*/
#define CONFIG_ARM920T /* This is an ARM920T Core */
#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24X0 SoC */
#define CONFIG_S3C2440 /* in a SAMSUNG S3C2440 SoC */
#define CONFIG_MINI2440 /* on a MIN2440 Board */
#define MACH_TYPE_MINI2440 1999
#define CONFIG_MACH_TYPE MACH_TYPE_MINI2440
/*
* We don't use lowlevel_init
*/
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
/*
* input clock of PLL
*/
/* MINI2440 has 12.0000MHz input clock */
#define CONFIG_SYS_CLK_FREQ 12000000
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048*1024)
/*
* Hardware drivers
*/
#define CONFIG_DRIVER_DM9000
#define CONFIG_DRIVER_DM9000_NO_EEPROM
#define CONFIG_DM9000_BASE 0x20000300
#define DM9000_IO CONFIG_DM9000_BASE
#define DM9000_DATA (CONFIG_DM9000_BASE+4)
/*
* select serial console configuration
*/
#define CONFIG_S3C24X0_SERIAL
#define CONFIG_SERIAL1
/*
* allow to overwrite serial and ethaddr
*/
#define CONFIG_ENV_OVERWRITE
/*
* Command definition
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PORTIO
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SAVES
/*
* Miscellaneous configurable options
*/
#define CONFIG_LONGHELP
#define CONFIG_SYS_PROMPT "MINI2440 => "
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 32
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MEMTEST_START 0x30000000
#define CONFIG_SYS_MEMTEST_END 0x34000000 /* 64MB in DRAM */
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x32000000
/* boot parameters address */
#define CONFIG_BOOT_PARAM_ADDR 0x30000100
/*
* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need
* it to wrap 100 times (total 1562500) to get 1 sec.
*/
#define CONFIG_SYS_HZ 1562500
/*
* valid baudrates
*/
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BAUDRATE 115200
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_SIZE (64*1024*1024) /* 64MB of DRAM */
#define CONFIG_SYS_SDRAM_BASE 0x30000000
#define CONFIG_SYS_FLASH_BASE 0x0
/*
* Stack should be on the SRAM because
* DRAM is not init
*/
#define CONFIG_SYS_INIT_SP_ADDR (0x40001000 - GENERATED_GBL_DATA_SIZE)
/*
* NOR FLASH organization
* Now uses the standard CFI interface
* FLASH and environment organization
*/
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_MONITOR_BASE 0x0
/* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_BANKS 1
/* 512 * 4096 sectors, or 32 * 64k blocks */
#define CONFIG_SYS_MAX_FLASH_SECT 512
#define CONFIG_FLASH_SHOW_PROGRESS 1
/*
* Config for NOR flash
*/
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_MY_ENV_OFFSET 0x40000
/* addr of environment */
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_MY_ENV_OFFSET)
/* 16k Total Size of Environment Sector */
#define CONFIG_ENV_SIZE 0x4000
/* ATAG configuration */
#define CONFIG_INITRD_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#endif /* __CONFIG_H */
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment