Commit b952c24a authored by Wolfgang Denk's avatar Wolfgang Denk Committed by Stefano Babic
Browse files

QONG: fix and update board config file



Fix flash memory map and other updates for QONG board:

- adjust/fix "kernel_addr" settings
- adjust/fix mtdparts NOR flash settings
- add mtdparts NAND flash mapping
- sort command list
- enable "setexpr" command
- enable ext2 support
- delete bogus comment
Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
parent 68a75d0b
......@@ -102,6 +102,7 @@
#define CONFIG_USB_STORAGE
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#endif /* CONFIG_CMD_USB */
......@@ -124,25 +125,16 @@
#include <config_cmd_default.h>
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_PING
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_SPI
#define CONFIG_CMD_DATE
#define BOARD_LATE_INIT
/*
* You can compile in a MAC address and your custom net settings by using
* the following syntax.
*
* #define CONFIG_ETHADDR xx:xx:xx:xx:xx:xx
* #define CONFIG_SERVERIP <server ip>
* #define CONFIG_IPADDR <board ip>
* #define CONFIG_GATEWAYIP <gateway ip>
* #define CONFIG_NETMASK <your netmask>
*/
#define BOARD_LATE_INIT
#define CONFIG_BOOTDELAY 5
......@@ -164,7 +156,7 @@
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addmisc=setenv bootargs ${bootargs}\0" \
"uboot_addr=A0000000\0" \
"kernel_addr=A00A0000\0" \
"kernel_addr=A00C0000\0" \
"ramdisk_addr=A0300000\0" \
"u-boot=qong/u-boot.bin\0" \
"kernel_addr_r=80800000\0" \
......@@ -296,10 +288,14 @@ extern int qong_nand_rdy(void *chip);
#define CONFIG_LZO
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
#define MTDIDS_DEFAULT "nor0=physmap-flash.0," \
"nand0=gen_nand"
#define MTDPARTS_DEFAULT \
"mtdparts=physmap-flash.0:384k(U-Boot),128k(env1)," \
"128k(env2),2432k(kernel),13m(ramdisk),-(user)"
"mtdparts=physmap-flash.0:" \
"512k(U-Boot),128k(env1),128k(env2)," \
"2304k(kernel),13m(ramdisk),-(user);" \
"gen_nand:" \
"128m(nand)"
/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE 0x80000000
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment