Commit bc897b1d authored by Lei Wen's avatar Lei Wen Committed by Andy Fleming

mmc: enable partition switch function for emmc

For emmc, it may have up to 7 partitions: two boot partitions, one
user partition, one RPMB partition and four general purpose partitions.
(Refer to JESD84-A44.pdf/page 154)

As bootloader may need to read out or reflashing images on those

different partitions, it is better to enable the partition switch with
console command support.

Also for partition would be restore to user partition(part 0) when CMD0
is used, so change mmc_init routine to perform normal initialization
only once for each slot, unless use the rescan command to force init
again.
Signed-off-by: default avatarLei Wen <leiwen@marvell.com>
Acked-by: default avatarAndy Fleming <afleming@freescale.com>
parent ea6ebe21
......@@ -164,6 +164,7 @@ int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 1;
}
mmc->has_init = 0;
mmc_init(mmc);
return 0;
......@@ -189,14 +190,22 @@ int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
print_mmc_devices('\n');
return 0;
} else if (strcmp(argv[1], "dev") == 0) {
int dev;
int dev, part = -1;
struct mmc *mmc;
if (argc == 2)
dev = curr_device;
else if (argc == 3)
dev = simple_strtoul(argv[2], NULL, 10);
else
else if (argc == 4) {
dev = (int)simple_strtoul(argv[2], NULL, 10);
part = (int)simple_strtoul(argv[3], NULL, 10);
if (part > PART_ACCESS_MASK) {
printf("#part_num shouldn't be larger"
" than %d\n", PART_ACCESS_MASK);
return 1;
}
} else
return cmd_usage(cmdtp);
mmc = find_mmc_device(dev);
......@@ -205,8 +214,29 @@ int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 1;
}
mmc_init(mmc);
if (part != -1) {
int ret;
if (mmc->part_config == MMCPART_NOAVAILABLE) {
printf("Card doesn't support part_switch\n");
return 1;
}
if (part != mmc->part_num) {
ret = mmc_switch_part(dev, part);
if (!ret)
mmc->part_num = part;
printf("switch to partions #%d, %s\n",
part, (!ret) ? "OK" : "ERROR");
}
}
curr_device = dev;
printf("mmc%d is current device\n", curr_device);
if (mmc->part_config == MMCPART_NOAVAILABLE)
printf("mmc%d is current device\n", curr_device);
else
printf("mmc%d(part %d) is current device\n",
curr_device, mmc->part_num);
return 0;
} else if (strcmp(argv[1], "read") == 0) {
......@@ -269,6 +299,6 @@ U_BOOT_CMD(
"mmc write addr blk# cnt\n"
"mmc rescan\n"
"mmc part - lists available partition on current mmc device\n"
"mmc dev [dev] - show or set current mmc device\n"
"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
"mmc list - lists available devices");
#endif
......@@ -577,6 +577,18 @@ int mmc_change_freq(struct mmc *mmc)
return 0;
}
int mmc_switch_part(int dev_num, unsigned int part_num)
{
struct mmc *mmc = find_mmc_device(dev_num);
if (!mmc)
return -1;
return mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF,
(mmc->part_config & ~PART_ACCESS_MASK)
| (part_num & PART_ACCESS_MASK));
}
int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
{
struct mmc_cmd cmd;
......@@ -899,6 +911,7 @@ int mmc_startup(struct mmc *mmc)
return err;
}
mmc->part_config = MMCPART_NOAVAILABLE;
if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) {
/* check ext_csd version and capacity */
err = mmc_send_ext_csd(mmc, ext_csd);
......@@ -907,6 +920,10 @@ int mmc_startup(struct mmc *mmc)
ext_csd[214] << 16 | ext_csd[215] << 24;
mmc->capacity *= 512;
}
/* store the partition info of emmc */
if (ext_csd[160] & PART_SUPPORT)
mmc->part_config = ext_csd[179];
}
if (IS_SD(mmc))
......@@ -1048,6 +1065,9 @@ int mmc_init(struct mmc *mmc)
{
int err;
if (mmc->has_init)
return 0;
err = mmc->init(mmc);
if (err)
......@@ -1062,6 +1082,9 @@ int mmc_init(struct mmc *mmc)
if (err)
return err;
/* The internal partition reset to user partition(0) at every CMD0*/
mmc->part_num = 0;
/* Test for SD version 2 */
err = mmc_send_if_cond(mmc);
......@@ -1078,7 +1101,12 @@ int mmc_init(struct mmc *mmc)
}
}
return mmc_startup(mmc);
err = mmc_startup(mmc);
if (err)
mmc->has_init = 0;
else
mmc->has_init = 1;
return err;
}
/*
......
......@@ -138,6 +138,7 @@
* EXT_CSD fields
*/
#define EXT_CSD_PART_CONF 179 /* R/W */
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
#define EXT_CSD_HS_TIMING 185 /* R/W */
#define EXT_CSD_CARD_TYPE 196 /* RO */
......@@ -179,6 +180,9 @@
#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMCPART_NOAVAILABLE (0xff)
#define PART_ACCESS_MASK (0x7)
#define PART_SUPPORT (0x1)
struct mmc_cid {
unsigned long psn;
......@@ -263,6 +267,7 @@ struct mmc {
void *priv;
uint voltages;
uint version;
uint has_init;
uint f_min;
uint f_max;
int high_capacity;
......@@ -275,6 +280,8 @@ struct mmc {
uint csd[4];
uint cid[4];
ushort rca;
char part_config;
char part_num;
uint tran_speed;
uint read_bl_len;
uint write_bl_len;
......@@ -297,6 +304,7 @@ int mmc_set_dev(int dev_num);
void print_mmc_devices(char separator);
int get_mmc_num(void);
int board_mmc_getcd(u8 *cd, struct mmc *mmc);
int mmc_switch_part(int dev_num, unsigned int part_num);
#ifdef CONFIG_GENERIC_MMC
int atmel_mci_init(void *regs);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment