Commit bff188ba authored by Liu Yu's avatar Liu Yu Committed by Wolfgang Denk
Browse files

Make pixis_set_sgmii more general to support MPC85xx boards.



The pixis sgmii command depend on the FPGA support on the board, some 85xx
boards support SGMII riser card but did not support this command, define
CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command.

Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits
are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and
PIXIS_VCFGEN1_MASK in header file for both boards.

Signed-off-by: default avatarLiu Yu <yu.liu@freescale.com>
parent 5e981d68
......@@ -283,7 +283,7 @@ U_BOOT_CMD(
"diswd - Disable watchdog timer \n",
NULL);
#ifdef CONFIG_FSL_SGMII_RISER
#ifdef CONFIG_PIXIS_SGMII_CMD
int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int which_tsec = -1;
......@@ -295,17 +295,33 @@ int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
which_tsec = simple_strtoul(argv[1], NULL, 0);
switch (which_tsec) {
#ifdef CONFIG_TSEC1
case 1:
mask = PIXIS_VSPEED2_TSEC1SER;
switch_mask = PIXIS_VCFGEN1_TSEC1SER;
break;
#endif
#ifdef CONFIG_TSEC2
case 2:
mask = PIXIS_VSPEED2_TSEC2SER;
switch_mask = PIXIS_VCFGEN1_TSEC2SER;
break;
#endif
#ifdef CONFIG_TSEC3
case 3:
mask = PIXIS_VSPEED2_TSEC3SER;
switch_mask = PIXIS_VCFGEN1_TSEC3SER;
break;
#endif
#ifdef CONFIG_TSEC4
case 4:
mask = PIXIS_VSPEED2_TSEC4SER;
switch_mask = PIXIS_VCFGEN1_TSEC4SER;
break;
#endif
default:
mask = PIXIS_VSPEED2_TSEC1SER | PIXIS_VSPEED2_TSEC3SER;
switch_mask = PIXIS_VCFGEN1_TSEC1SER | PIXIS_VCFGEN1_TSEC3SER;
mask = PIXIS_VSPEED2_MASK;
switch_mask = PIXIS_VCFGEN1_MASK;
break;
}
......
......@@ -202,6 +202,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define PIXIS_VSPEED2_TSEC3SER 0x1
#define PIXIS_VCFGEN1_TSEC1SER 0x20
#define PIXIS_VCFGEN1_TSEC3SER 0x40
#define PIXIS_VSPEED2_MASK (PIXIS_VSPEED2_TSEC1SER|PIXIS_VSPEED2_TSEC3SER)
#define PIXIS_VCFGEN1_MASK (PIXIS_VCFGEN1_TSEC1SER|PIXIS_VCFGEN1_TSEC3SER)
/* define to use L1 as initial stack */
......@@ -374,6 +376,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_TSEC3 1
#define CONFIG_TSEC3_NAME "eTSEC3"
#define CONFIG_PIXIS_SGMII_CMD
#define CONFIG_FSL_SGMII_RISER 1
#define SGMII_RISER_PHY_OFFSET 0x1c
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment