Commit c0cd0207 authored by Prafulla Wadaskar's avatar Prafulla Wadaskar Committed by Wolfgang Denk
Browse files

Kirkwood: print_cpuinfo fixed for valid devid revid



Earlier Device Identification register was used to detect
the type for SoC, considering 88F6282 support to be added,
It is not possible to detect the same using current
algorithm.

With this patch, device ID is being read using PCIE devid
register, also valid chip revision ID will also be read and
displayed
Signed-off-by: default avatarPrafulla Wadaskar <prafulla@marvell.com>
parent d3497138
......@@ -54,10 +54,11 @@ unsigned char get_random_hex(void)
u8 outbuf[BUFLEN];
/*
* in case of 88F6281/88F6192 A0,
* in case of 88F6281/88F6282/88F6192 A0,
* Bit7 need to reset to generate random values in KW_REG_UNDOC_0x1470
* Soc reg offsets KW_REG_UNDOC_0x1470 and KW_REG_UNDOC_0x1478 are reserved regs and
* Does not have names at this moment (no errata available)
* Soc reg offsets KW_REG_UNDOC_0x1470 and KW_REG_UNDOC_0x1478 are
* reserved regs and does not have names at this moment
* (no errata available)
*/
writel(readl(KW_REG_UNDOC_0x1478) & ~(1 << 7), KW_REG_UNDOC_0x1478);
for (i = 0; i < BUFLEN; i++) {
......@@ -271,20 +272,31 @@ static void kw_sysrst_check(void)
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
char *name = "Unknown";
char *rev;
u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff;
u8 revid = readl(KW_REG_PCIE_REVID) & 0xff;
switch (readl(KW_REG_DEVICE_ID) & 0x03) {
case 1:
name = "88F6192_A0";
if ((readl(KW_REG_DEVICE_ID) & 0x03) > 2) {
printf("Error.. %s:Unsupported Kirkwood SoC 88F%04x\n", __FUNCTION__, devid);
return -1;
}
switch (revid) {
case 0:
rev = "Z0";
break;
case 2:
name = "88F6281_A0";
rev = "A0";
break;
case 3:
rev = "A1";
break;
default:
printf("SoC: Unsupported Kirkwood\n");
return -1;
rev = "??";
break;
}
printf("SoC: Kirkwood %s\n", name);
printf("SoC: Kirkwood 88F%04x_%s\n", devid, rev);
return 0;
}
#endif /* CONFIG_DISPLAY_CPUINFO */
......
......@@ -35,6 +35,8 @@
#define KWGBE_PORT_SERIAL_CONTROL1_REG(_x) \
((_x ? KW_EGIGA0_BASE : KW_EGIGA1_BASE) + 0x44c)
#define KW_REG_PCIE_DEVID (KW_REG_PCIE_BASE + 0x00)
#define KW_REG_PCIE_REVID (KW_REG_PCIE_BASE + 0x08)
#define KW_REG_DEVICE_ID (KW_MPP_BASE + 0x34)
#define KW_REG_SYSRST_CNT (KW_MPP_BASE + 0x50)
#define SYSRST_CNT_1SEC_VAL (25*1000000)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment