Commit c207ff61 authored by Alison Wang's avatar Alison Wang Committed by York Sun
Browse files

arm: ls102xa: Remove bit reversing for SCFG registers



SCFG_SCFGREVCR is SCFG bit reverse register. This register
must be written with 0xFFFFFFFF before writing to any other
SCFG register. Then other SCFG register could be written in
big-endian mode.

Address: 157_0000h base + 200h offset = 157_0200h
Bit   0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15|16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
W/R                                   SCFGREV
Reset 0 0 0 0 0 0 0 0 0 0  0  0  0  0  0  0  0  0  0  0  0  0  0  0  0  0  0  0  0  0  0  0
0-31
SCFGREV SCFG Bit Reverse Control Filed
32'h 0000_0000 - No bit reverse is applied
32'h FFFF_FFFF - Bit reverse is applied; so 31:0 will be stored/read as
0:31

This patch removes the bit reversing for SCFG registers in
u-boot. It will be implemented through PBI commands in RCW
.pbi
write 0x570200, 0xffffffff
.end
So other SCFG register could be written in big-endian mode
in u-boot or kernel directly.
Signed-off-by: default avatarAlison Wang <alison.wang@freescale.com>
Reviewed-by: default avatarYork Sun <yorksun@freescale.com>
parent 644bc7ec
......@@ -95,8 +95,6 @@ struct ccsr_gur {
u32 sdhcpcr;
};
#define SCFG_SCFGREVCR_REV 0xffffffff
#define SCFG_SCFGREVCR_NOREV 0
#define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f
#define SCFG_ETSECCMCR_GE2_CLK125 0x04000000
#define SCFG_PIXCLKCR_PXCKEN 0x80000000
......
......@@ -140,9 +140,7 @@ int board_early_init_f(void)
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
#ifdef CONFIG_TSEC_ENET
out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV);
out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV);
#endif
#ifdef CONFIG_FSL_IFC
......
......@@ -255,11 +255,8 @@ int board_early_init_f(void)
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
#ifdef CONFIG_TSEC_ENET
out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV);
out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
udelay(10);
out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV);
#endif
#ifdef CONFIG_FSL_IFC
......@@ -267,9 +264,7 @@ int board_early_init_f(void)
#endif
#ifdef CONFIG_FSL_DCU_FB
out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV);
out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV);
#endif
return 0;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment