Skip to content
GitLab
Commit c29fdfc1 authored by wdenk's avatar wdenk
Browse files

Patch by Yuli Barcohen, 14 Aug 2003: 

add support for bzip2 uncompression
parent ca75adde
Expand all Hide whitespace changes
Inline Side-by-side
CHANGELOG
View file @ c29fdfc1
......@@ -2,6 +2,12 @@
Changes for U-Boot 0.4.7:
======================================================================
* Patch by Yuli Barcohen, 14 Aug 2003:
add support for bzip2 uncompression
* Add GCC library to examples/Makefile so GCC utility functions will
be resolved, too
* Add I2C and RTC support for RMU board using software I2C driver
(because of better response to iprobe command); fix problem with
"reset" command
......
README
View file @ c29fdfc1
......@@ -859,6 +859,16 @@ The following options need to be configured:
allows for a "silent" boot where a splash screen is
loaded very quickly after power-on.
- Compression support:
CONFIG_BZIP2
If this option is set, support for bzip2 compressed
images is included. If not, only uncompressed and gzip
compressed images are supported.
NOTE: the bzip2 algorithm requires a lot of RAM, so
the malloc area (as defined by CFG_MALLOC_LEN) should
be at least 4MB.
- Ethernet address:
CONFIG_ETHADDR
......@@ -2263,8 +2273,7 @@ defines the following image properties:
* Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
IA64, MIPS, MIPS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
Currently supported: PowerPC).
* Compression Type (Provisions for uncompressed, gzip, bzip2;
Currently supported: uncompressed, gzip).
* Compression Type (uncompressed, gzip, bzip2)
* Load Address
* Entry Point
* Image Name
......
common/cmd_bootm.c
View file @ c29fdfc1
......@@ -30,6 +30,7 @@
#include <image.h>
#include <malloc.h>
#include <zlib.h>
#include <bzlib.h>
#include <environment.h>
#include <asm/byteorder.h>
......@@ -142,6 +143,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
ulong addr;
ulong data, len, checksum;
ulong *len_ptr;
uint unc_len = 0x400000;
int i, verify;
char *name, *s;
int (*appl)(cmd_tbl_t *, int, int, char *[]);
......@@ -307,13 +309,26 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
break;
case IH_COMP_GZIP:
printf (" Uncompressing %s ... ", name);
if (gunzip ((void *)ntohl(hdr->ih_load), 0x400000,
if (gunzip ((void *)ntohl(hdr->ih_load), unc_len,
(uchar *)data, (int *)&len) != 0) {
printf ("GUNZIP ERROR - must RESET board to recover\n");
SHOW_BOOT_PROGRESS (-6);
do_reset (cmdtp, flag, argc, argv);
}
break;
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2:
printf (" Uncompressing %s ... ", name);
i = BZ2_bzBuffToBuffDecompress ((char*)ntohl(hdr->ih_load),
&unc_len, (char *)data, len, 0, 0);
if (i != BZ_OK) {
printf ("BUNZIP2 ERROR %d - must RESET board to recover\n", i);
SHOW_BOOT_PROGRESS (-6);
udelay(100000);
do_reset (cmdtp, flag, argc, argv);
}
break;
#endif /* CONFIG_BZIP2 */
default:
if (iflag)
enable_interrupts();
......@@ -1206,6 +1221,13 @@ int gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
return (0);
}
#ifdef CONFIG_BZIP2
void bz_internal_error(int errcode)
{
printf ("BZIP2 internal error %d\n", errcode);
}
#endif /* CONFIG_BZIP2 */
static void
do_bootm_rtems (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
ulong addr, ulong *len_ptr, int verify)
......
examples/Makefile
View file @ c29fdfc1
......@@ -79,6 +79,8 @@ endif
LIBCOBJS= stubs.o
LIBOBJS = $(LIBAOBJS) $(LIBCOBJS)
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
CPPFLAGS += -I..
all: .depend $(LIB) $(SREC) $(BIN)
......@@ -88,7 +90,8 @@ $(LIB): .depend $(LIBOBJS)
$(AR) crv $@ $(LIBOBJS)
%.srec: %.o $(LIB)
$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $< $(LIB)
$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $< $(LIB) \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
%.bin: %.srec
......
include/bzlib.h 0 → 100644
View file @ c29fdfc1
/*
* This file is a modified version of bzlib.h from the bzip2-1.0.2
* distribution which can be found at http://sources.redhat.com/bzip2/
*/
/*-------------------------------------------------------------*/
/*--- Public header file for the library. ---*/
/*--- bzlib.h ---*/
/*-------------------------------------------------------------*/
/*--
This file is a part of bzip2 and/or libbzip2, a program and
library for lossless, block-sorting data compression.
Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
3. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
4. The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Julian Seward, Cambridge, UK.
jseward@acm.org
bzip2/libbzip2 version 1.0 of 21 March 2000
This program is based on (at least) the work of:
Mike Burrows
David Wheeler
Peter Fenwick
Alistair Moffat
Radford Neal
Ian H. Witten
Robert Sedgewick
Jon L. Bentley
For more information on these sources, see the manual.
--*/
#ifndef _BZLIB_H
#define _BZLIB_H
/* Configure for U-Boot environment */
#define BZ_NO_STDIO
#define BZ_NO_COMPRESS
/* End of configuration for U-Boot environment */
#ifdef __cplusplus
extern "C" {
#endif
#define BZ_RUN 0
#define BZ_FLUSH 1
#define BZ_FINISH 2
#define BZ_OK 0
#define BZ_RUN_OK 1
#define BZ_FLUSH_OK 2
#define BZ_FINISH_OK 3
#define BZ_STREAM_END 4
#define BZ_SEQUENCE_ERROR (-1)
#define BZ_PARAM_ERROR (-2)
#define BZ_MEM_ERROR (-3)
#define BZ_DATA_ERROR (-4)
#define BZ_DATA_ERROR_MAGIC (-5)
#define BZ_IO_ERROR (-6)
#define BZ_UNEXPECTED_EOF (-7)
#define BZ_OUTBUFF_FULL (-8)
#define BZ_CONFIG_ERROR (-9)
typedef
struct {
char *next_in;
unsigned int avail_in;
unsigned int total_in_lo32;
unsigned int total_in_hi32;
char *next_out;
unsigned int avail_out;
unsigned int total_out_lo32;
unsigned int total_out_hi32;
void *state;
void *(*bzalloc)(void *,int,int);
void (*bzfree)(void *,void *);
void *opaque;
}
bz_stream;
#ifndef BZ_IMPORT
#define BZ_EXPORT
#endif
#ifdef _WIN32
# include <windows.h>
# ifdef small
/* windows.h define small to char */
# undef small
# endif
# ifdef BZ_EXPORT
# define BZ_API(func) WINAPI func
# define BZ_EXTERN extern
# else
/* import windows dll dynamically */
# define BZ_API(func) (WINAPI * func)
# define BZ_EXTERN
# endif
#else
# define BZ_API(func) func
# define BZ_EXTERN extern
#endif
/*-- Core (low-level) library functions --*/
BZ_EXTERN int BZ_API(BZ2_bzCompressInit) (
bz_stream* strm,
int blockSize100k,
int verbosity,
int workFactor
);
BZ_EXTERN int BZ_API(BZ2_bzCompress) (
bz_stream* strm,
int action
);
BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) (
bz_stream* strm
);
BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) (
bz_stream *strm,
int verbosity,
int small
);
BZ_EXTERN int BZ_API(BZ2_bzDecompress) (
bz_stream* strm
);
BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) (
bz_stream *strm
);
/*-- High(er) level library functions --*/
#ifndef BZ_NO_STDIO
#define BZ_MAX_UNUSED 5000
/* Need a definitition for FILE */
#include <stdio.h>
typedef void BZFILE;
BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) (
int* bzerror,
FILE* f,
int verbosity,
int small,
void* unused,
int nUnused
);
BZ_EXTERN void BZ_API(BZ2_bzReadClose) (
int* bzerror,
BZFILE* b
);
BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) (
int* bzerror,
BZFILE* b,
void** unused,
int* nUnused
);
BZ_EXTERN int BZ_API(BZ2_bzRead) (
int* bzerror,
BZFILE* b,
void* buf,
int len
);
BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) (
int* bzerror,
FILE* f,
int blockSize100k,
int verbosity,
int workFactor
);
BZ_EXTERN void BZ_API(BZ2_bzWrite) (
int* bzerror,
BZFILE* b,
void* buf,
int len
);
BZ_EXTERN void BZ_API(BZ2_bzWriteClose) (
int* bzerror,
BZFILE* b,
int abandon,
unsigned int* nbytes_in,
unsigned int* nbytes_out
);
BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) (
int* bzerror,
BZFILE* b,
int abandon,
unsigned int* nbytes_in_lo32,
unsigned int* nbytes_in_hi32,
unsigned int* nbytes_out_lo32,
unsigned int* nbytes_out_hi32
);
#endif
/*-- Utility functions --*/
BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) (
char* dest,
unsigned int* destLen,
char* source,
unsigned int sourceLen,
int blockSize100k,
int verbosity,
int workFactor
);
BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) (
char* dest,
unsigned int* destLen,
char* source,
unsigned int sourceLen,
int small,
int verbosity
);
/*--
Code contributed by Yoshioka Tsuneo
(QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
to support better zlib compatibility.
This code is not _officially_ part of libbzip2 (yet);
I haven't tested it, documented it, or considered the
threading-safeness of it.
If this code breaks, please contact both Yoshioka and me.
--*/
BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) (
void
);
#ifndef BZ_NO_STDIO
BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) (
const char *path,
const char *mode
);
BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) (
int fd,
const char *mode
);
BZ_EXTERN int BZ_API(BZ2_bzread) (
BZFILE* b,
void* buf,
int len
);
BZ_EXTERN int BZ_API(BZ2_bzwrite) (
BZFILE* b,
void* buf,
int len
);
BZ_EXTERN int BZ_API(BZ2_bzflush) (
BZFILE* b
);
BZ_EXTERN void BZ_API(BZ2_bzclose) (
BZFILE* b
);
BZ_EXTERN const char * BZ_API(BZ2_bzerror) (
BZFILE *b,
int *errnum
);
#endif
#ifdef __cplusplus
}
#endif
#endif
/*-------------------------------------------------------------*/
/*--- end bzlib.h ---*/
/*-------------------------------------------------------------*/
lib_generic/Makefile
View file @ c29fdfc1
......@@ -25,7 +25,10 @@ include $(TOPDIR)/config.mk
LIB = libgeneric.a
OBJS = crc32.o ctype.o display_options.o ldiv.o string.o vsprintf.o zlib.o
OBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \
bzlib_randtable.o bzlib_huffman.o \
crc32.o ctype.o display_options.o ldiv.o \
string.o vsprintf.o zlib.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $(OBJS)
......
lib_generic/bzlib.c 0 → 100644
View file @ c29fdfc1
This diff is collapsed.
lib_generic/bzlib_crctable.c 0 → 100644
View file @ c29fdfc1
#include <config.h>
#ifdef CONFIG_BZIP2
/*-------------------------------------------------------------*/
/*--- Table for doing CRCs ---*/
/*--- crctable.c ---*/
/*-------------------------------------------------------------*/
/*--
This file is a part of bzip2 and/or libbzip2, a program and
library for lossless, block-sorting data compression.
Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
3. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
4. The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Julian Seward, Cambridge, UK.
jseward@acm.org
bzip2/libbzip2 version 1.0 of 21 March 2000
This program is based on (at least) the work of:
Mike Burrows
David Wheeler
Peter Fenwick
Alistair Moffat
Radford Neal
Ian H. Witten
Robert Sedgewick
Jon L. Bentley
For more information on these sources, see the manual.
--*/
#include "bzlib_private.h"
/*--
I think this is an implementation of the AUTODIN-II,
Ethernet & FDDI 32-bit CRC standard. Vaguely derived
from code by Rob Warnock, in Section 51 of the
comp.compression FAQ.
--*/
UInt32 BZ2_crc32Table[256] = {
/*-- Ugly, innit? --*/
0x00000000L, 0x04c11db7L, 0x09823b6eL, 0x0d4326d9L,
0x130476dcL, 0x17c56b6bL, 0x1a864db2L, 0x1e475005L,
0x2608edb8L, 0x22c9f00fL, 0x2f8ad6d6L, 0x2b4bcb61L,
0x350c9b64L, 0x31cd86d3L, 0x3c8ea00aL, 0x384fbdbdL,
0x4c11db70L, 0x48d0c6c7L, 0x4593e01eL, 0x4152fda9L,
0x5f15adacL, 0x5bd4b01bL, 0x569796c2L, 0x52568b75L,
0x6a1936c8L, 0x6ed82b7fL, 0x639b0da6L, 0x675a1011L,
0x791d4014L, 0x7ddc5da3L, 0x709f7b7aL, 0x745e66cdL,
0x9823b6e0L, 0x9ce2ab57L, 0x91a18d8eL, 0x95609039L,
0x8b27c03cL, 0x8fe6dd8bL, 0x82a5fb52L, 0x8664e6e5L,
0xbe2b5b58L, 0xbaea46efL, 0xb7a96036L, 0xb3687d81L,
0xad2f2d84L, 0xa9ee3033L, 0xa4ad16eaL, 0xa06c0b5dL,
0xd4326d90L, 0xd0f37027L, 0xddb056feL, 0xd9714b49L,
0xc7361b4cL, 0xc3f706fbL, 0xceb42022L, 0xca753d95L,
0xf23a8028L, 0xf6fb9d9fL, 0xfbb8bb46L, 0xff79a6f1L,
0xe13ef6f4L, 0xe5ffeb43L, 0xe8bccd9aL, 0xec7dd02dL,
0x34867077L, 0x30476dc0L, 0x3d044b19L, 0x39c556aeL,
0x278206abL, 0x23431b1cL, 0x2e003dc5L, 0x2ac12072L,
0x128e9dcfL, 0x164f8078L, 0x1b0ca6a1L, 0x1fcdbb16L,
0x018aeb13L, 0x054bf6a4L, 0x0808d07dL, 0x0cc9cdcaL,
0x7897ab07L, 0x7c56b6b0L, 0x71159069L, 0x75d48ddeL,
0x6b93dddbL, 0x6f52c06cL, 0x6211e6b5L, 0x66d0fb02L,
0x5e9f46bfL, 0x5a5e5b08L, 0x571d7dd1L, 0x53dc6066L,
0x4d9b3063L, 0x495a2dd4L, 0x44190b0dL, 0x40d816baL,
0xaca5c697L, 0xa864db20L, 0xa527fdf9L, 0xa1e6e04eL,
0xbfa1b04bL, 0xbb60adfcL, 0xb6238b25L, 0xb2e29692L,
0x8aad2b2fL, 0x8e6c3698L, 0x832f1041L, 0x87ee0df6L,
0x99a95df3L, 0x9d684044L, 0x902b669dL, 0x94ea7b2aL,
0xe0b41de7L, 0xe4750050L, 0xe9362689L, 0xedf73b3eL,
0xf3b06b3bL, 0xf771768cL, 0xfa325055L, 0xfef34de2L,
0xc6bcf05fL, 0xc27dede8L, 0xcf3ecb31L, 0xcbffd686L,
0xd5b88683L, 0xd1799b34L, 0xdc3abdedL, 0xd8fba05aL,
0x690ce0eeL, 0x6dcdfd59L, 0x608edb80L, 0x644fc637L,
0x7a089632L, 0x7ec98b85L, 0x738aad5cL, 0x774bb0ebL,
0x4f040d56L, 0x4bc510e1L, 0x46863638L, 0x42472b8fL,
0x5c007b8aL, 0x58c1663dL, 0x558240e4L, 0x51435d53L,
0x251d3b9eL, 0x21dc2629L, 0x2c9f00f0L, 0x285e1d47L,
0x36194d42L, 0x32d850f5L, 0x3f9b762cL, 0x3b5a6b9bL,
0x0315d626L, 0x07d4cb91L, 0x0a97ed48L, 0x0e56f0ffL,
0x1011a0faL, 0x14d0bd4dL, 0x19939b94L, 0x1d528623L,
0xf12f560eL, 0xf5ee4bb9L, 0xf8ad6d60L, 0xfc6c70d7L,
0xe22b20d2L, 0xe6ea3d65L, 0xeba91bbcL, 0xef68060bL,
0xd727bbb6L, 0xd3e6a601L, 0xdea580d8L, 0xda649d6fL,
0xc423cd6aL, 0xc0e2d0ddL, 0xcda1f604L, 0xc960ebb3L,
0xbd3e8d7eL, 0xb9ff90c9L, 0xb4bcb610L, 0xb07daba7L,
0xae3afba2L, 0xaafbe615L, 0xa7b8c0ccL, 0xa379dd7bL,
0x9b3660c6L, 0x9ff77d71L, 0x92b45ba8L, 0x9675461fL,
0x8832161aL, 0x8cf30badL, 0x81b02d74L, 0x857130c3L,
0x5d8a9099L, 0x594b8d2eL, 0x5408abf7L, 0x50c9b640L,
0x4e8ee645L, 0x4a4ffbf2L, 0x470cdd2bL, 0x43cdc09cL,
0x7b827d21L, 0x7f436096L, 0x7200464fL, 0x76c15bf8L,
0x68860bfdL, 0x6c47164aL, 0x61043093L, 0x65c52d24L,
0x119b4be9L, 0x155a565eL, 0x18197087L, 0x1cd86d30L,
0x029f3d35L, 0x065e2082L, 0x0b1d065bL, 0x0fdc1becL,
0x3793a651L, 0x3352bbe6L, 0x3e119d3fL, 0x3ad08088L,
0x2497d08dL, 0x2056cd3aL, 0x2d15ebe3L, 0x29d4f654L,
0xc5a92679L, 0xc1683bceL, 0xcc2b1d17L, 0xc8ea00a0L,
0xd6ad50a5L, 0xd26c4d12L, 0xdf2f6bcbL, 0xdbee767cL,
0xe3a1cbc1L, 0xe760d676L, 0xea23f0afL, 0xeee2ed18L,
0xf0a5bd1dL, 0xf464a0aaL, 0xf9278673L, 0xfde69bc4L,
0x89b8fd09L, 0x8d79e0beL, 0x803ac667L, 0x84fbdbd0L,
0x9abc8bd5L, 0x9e7d9662L, 0x933eb0bbL, 0x97ffad0cL,
0xafb010b1L, 0xab710d06L, 0xa6322bdfL, 0xa2f33668L,
0xbcb4666dL, 0xb8757bdaL, 0xb5365d03L, 0xb1f740b4L
};
/*-------------------------------------------------------------*/
/*--- end crctable.c ---*/
/*-------------------------------------------------------------*/
#endif /* CONFIG_BZIP2 */
lib_generic/bzlib_decompress.c 0 → 100644
View file @ c29fdfc1
This diff is collapsed.
lib_generic/bzlib_huffman.c 0 → 100644
View file @ c29fdfc1
#include <config.h>
#ifdef CONFIG_BZIP2
/*-------------------------------------------------------------*/
/*--- Huffman coding low-level stuff ---*/
/*--- huffman.c ---*/
/*-------------------------------------------------------------*/
/*--
This file is a part of bzip2 and/or libbzip2, a program and
library for lossless, block-sorting data compression.
Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this