Commit c31e1326 authored by Valeriy Glushkov's avatar Valeriy Glushkov Committed by Kim Phillips

usb: mpx8349itx: added support of loading images from USB storage (MPH/DR)

Signed-off-by: default avatarValeriy Glushkov <gvv@lstec.com>
Signed-off-by: default avatarKim Phillips <kim.phillips@freescale.com>
parent d89e1c36
......@@ -79,6 +79,7 @@
#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */
#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
#define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */
#define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */
#endif
#define CONFIG_PCI
......@@ -155,6 +156,25 @@
#endif
#ifdef CONFIG_SYS_USB_HOST
/*
* Support USB
*/
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_FSL
/* Current USB implementation supports the only USB controller,
* so we have to choose between the MPH or the DR ones */
#if 1
#define CONFIG_HAS_FSL_MPH_USB
#else
#define CONFIG_HAS_FSL_DR_USB
#endif
#endif
/*
* DDR Setup
*/
......@@ -456,9 +476,11 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_SDRAM
#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114)
#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
|| defined(CONFIG_USB_STORAGE)
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_FAT
#define CONFIG_SUPPORT_VFAT
#endif
#ifdef CONFIG_COMPACT_FLASH
......@@ -467,6 +489,9 @@ boards, we say we have two, but don't display a message if we find only one. */
#ifdef CONFIG_SATA_SIL3114
#define CONFIG_CMD_SATA
#endif
#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE)
#define CONFIG_CMD_EXT2
#endif
......@@ -560,12 +585,14 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */
#define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */
#define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */
#define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */
#define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */
/*
* System IO Config
*/
#define CONFIG_SYS_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */
#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)
#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) /* USB DR as device + USB MPH as host */
#define CONFIG_SYS_HID0_INIT 0x000000000
#define CONFIG_SYS_HID0_FINAL CONFIG_SYS_HID0_INIT
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment