Commit c370d382 authored by Simon Glass's avatar Simon Glass Committed by Tom Rini

video: Drop the s3c-fb driver

This is not used in U-Boot.
Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
Acked-by: default avatarMinkyu Kang <mk7.kang@samsung.com>
Reviewed-by: default avatarTom Rini <trini@konsulko.com>
parent 14438e12
......@@ -49,7 +49,6 @@ obj-$(CONFIG_VIDEO_IPUV3) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o
obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o
obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o
obj-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
obj-$(CONFIG_VIDEO_S3C) += s3c-fb.o videomodes.o
obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o
obj-$(CONFIG_VIDEO_SED13806) += sed13806.o
obj-$(CONFIG_VIDEO_SM501) += sm501.o
......
......@@ -104,7 +104,7 @@
#define VIDEO_HW_BITBLT
#endif
#if defined(CONFIG_VIDEO_MXS) || defined(CONFIG_VIDEO_S3C)
#if defined(CONFIG_VIDEO_MXS)
#define VIDEO_FB_16BPP_WORD_SWAP
#endif
......
/*
* S3C24x0 LCD driver
*
* NOTE: Only 16/24 bpp operation with TFT LCD is supported.
*
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <malloc.h>
#include <video_fb.h>
#include <linux/errno.h>
#include <asm/io.h>
#include <asm/arch/s3c24x0_cpu.h>
#include "videomodes.h"
static GraphicDevice panel;
/* S3C requires the FB to be 4MiB aligned. */
#define S3CFB_ALIGN (4 << 20)
#define S3CFB_LCDCON1_CLKVAL(x) ((x) << 8)
#define S3CFB_LCDCON1_PNRMODE_TFT (0x3 << 5)
#define S3CFB_LCDCON1_BPPMODE_TFT_16BPP (0xc << 1)
#define S3CFB_LCDCON1_BPPMODE_TFT_24BPP (0xd << 1)
#define S3CFB_LCDCON2_VBPD(x) ((x) << 24)
#define S3CFB_LCDCON2_LINEVAL(x) ((x) << 14)
#define S3CFB_LCDCON2_VFPD(x) ((x) << 6)
#define S3CFB_LCDCON2_VSPW(x) ((x) << 0)
#define S3CFB_LCDCON3_HBPD(x) ((x) << 19)
#define S3CFB_LCDCON3_HOZVAL(x) ((x) << 8)
#define S3CFB_LCDCON3_HFPD(x) ((x) << 0)
#define S3CFB_LCDCON4_HSPW(x) ((x) << 0)
#define S3CFB_LCDCON5_BPP24BL (1 << 12)
#define S3CFB_LCDCON5_FRM565 (1 << 11)
#define S3CFB_LCDCON5_HWSWP (1 << 0)
#define PS2KHZ(ps) (1000000000UL / (ps))
/*
* Example:
* setenv videomode video=ctfb:x:800,y:480,depth:16,mode:0,\
* pclk:30066,le:41,ri:89,up:45,lo:12,
* hs:1,vs:1,sync:100663296,vmode:0
*/
static void s3c_lcd_init(GraphicDevice *panel,
struct ctfb_res_modes *mode, int bpp)
{
uint32_t clk_divider;
struct s3c24x0_lcd *regs = s3c24x0_get_base_lcd();
/* Stop the controller. */
clrbits_le32(&regs->lcdcon1, 1);
/* Calculate clock divider. */
clk_divider = (get_HCLK() / PS2KHZ(mode->pixclock)) / 1000;
clk_divider = DIV_ROUND_UP(clk_divider, 2);
if (clk_divider)
clk_divider -= 1;
/* Program LCD configuration. */
switch (bpp) {
case 16:
writel(S3CFB_LCDCON1_BPPMODE_TFT_16BPP |
S3CFB_LCDCON1_PNRMODE_TFT |
S3CFB_LCDCON1_CLKVAL(clk_divider),
&regs->lcdcon1);
writel(S3CFB_LCDCON5_HWSWP | S3CFB_LCDCON5_FRM565,
&regs->lcdcon5);
break;
case 24:
writel(S3CFB_LCDCON1_BPPMODE_TFT_24BPP |
S3CFB_LCDCON1_PNRMODE_TFT |
S3CFB_LCDCON1_CLKVAL(clk_divider),
&regs->lcdcon1);
writel(S3CFB_LCDCON5_BPP24BL, &regs->lcdcon5);
break;
}
writel(S3CFB_LCDCON2_LINEVAL(mode->yres - 1) |
S3CFB_LCDCON2_VBPD(mode->upper_margin - 1) |
S3CFB_LCDCON2_VFPD(mode->lower_margin - 1) |
S3CFB_LCDCON2_VSPW(mode->vsync_len - 1),
&regs->lcdcon2);
writel(S3CFB_LCDCON3_HBPD(mode->right_margin - 1) |
S3CFB_LCDCON3_HFPD(mode->left_margin - 1) |
S3CFB_LCDCON3_HOZVAL(mode->xres - 1),
&regs->lcdcon3);
writel(S3CFB_LCDCON4_HSPW(mode->hsync_len - 1),
&regs->lcdcon4);
/* Write FB address. */
writel(panel->frameAdrs >> 1, &regs->lcdsaddr1);
writel((panel->frameAdrs +
(mode->xres * mode->yres * panel->gdfBytesPP)) >> 1,
&regs->lcdsaddr2);
writel(mode->xres * bpp / 16, &regs->lcdsaddr3);
/* Start the controller. */
setbits_le32(&regs->lcdcon1, 1);
}
void *video_hw_init(void)
{
int bpp = -1;
char *penv;
void *fb;
struct ctfb_res_modes mode;
puts("Video: ");
/* Suck display configuration from "videomode" variable */
penv = getenv("videomode");
if (!penv) {
puts("S3CFB: 'videomode' variable not set!\n");
return NULL;
}
bpp = video_get_params(&mode, penv);
/* fill in Graphic device struct */
sprintf(panel.modeIdent, "%dx%dx%d", mode.xres, mode.yres, bpp);
panel.winSizeX = mode.xres;
panel.winSizeY = mode.yres;
panel.plnSizeX = mode.xres;
panel.plnSizeY = mode.yres;
switch (bpp) {
case 24:
panel.gdfBytesPP = 4;
panel.gdfIndex = GDF_32BIT_X888RGB;
break;
case 16:
panel.gdfBytesPP = 2;
panel.gdfIndex = GDF_16BIT_565RGB;
break;
default:
printf("S3CFB: Invalid BPP specified! (bpp = %i)\n", bpp);
return NULL;
}
panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP;
/* Allocate framebuffer */
fb = memalign(S3CFB_ALIGN, roundup(panel.memSize, S3CFB_ALIGN));
if (!fb) {
printf("S3CFB: Error allocating framebuffer!\n");
return NULL;
}
/* Wipe framebuffer */
memset(fb, 0, panel.memSize);
panel.frameAdrs = (u32)fb;
printf("%s\n", panel.modeIdent);
/* Start framebuffer */
s3c_lcd_init(&panel, &mode, bpp);
return (void *)&panel;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment