Commit c44efcf9 authored by Mike Frysinger's avatar Mike Frysinger Committed by Ben Warren

smc911x_eeprom: fix building after smc911x overhaul

When the smc911x driver was converted to NET_MULTI, the smc911x eeprom was
missed.  The config option needed updating as well as overhauling of the
rergister read/write functions.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
Tested-by: default avatarMike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: default avatarBen Warren <biggerbadderben@gmail.com>
parent 4f127980
......@@ -2,7 +2,7 @@
* smc911x_eeprom.c - EEPROM interface to SMC911x parts.
* Only tested on SMSC9118 though ...
*
* Copyright 2004-2008 Analog Devices Inc.
* Copyright 2004-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*
......@@ -17,8 +17,12 @@
#include <common.h>
#include <exports.h>
#ifdef CONFIG_DRIVER_SMC911X
/* the smc911x.h gets base addr through eth_device' iobase */
struct eth_device {
const char *name;
unsigned long iobase;
void *priv;
};
#include "../drivers/net/smc911x.h"
/**
......@@ -55,32 +59,32 @@ static void usage(void)
* Registers 0x00 - 0x50 are FIFOs. The 0x50+ are the control registers
* and they're all 32bits long. 0xB8+ are reserved, so don't bother.
*/
static void dump_regs(void)
static void dump_regs(struct eth_device *dev)
{
u8 i, j = 0;
for (i = 0x50; i < 0xB8; i += sizeof(u32))
printf("%02x: 0x%08x %c", i,
smc911x_reg_read(CONFIG_DRIVER_SMC911X_BASE + i),
smc911x_reg_read(dev, i),
(j++ % 2 ? '\n' : ' '));
}
/**
* do_eeprom_cmd - handle eeprom communication
*/
static int do_eeprom_cmd(int cmd, u8 reg)
static int do_eeprom_cmd(struct eth_device *dev, int cmd, u8 reg)
{
if (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY) {
if (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY) {
printf("eeprom_cmd: busy at start (E2P_CMD = 0x%08x)\n",
smc911x_reg_read(E2P_CMD));
smc911x_reg_read(dev, E2P_CMD));
return -1;
}
smc911x_reg_write(E2P_CMD, E2P_CMD_EPC_BUSY | cmd | reg);
smc911x_reg_write(dev, E2P_CMD, E2P_CMD_EPC_BUSY | cmd | reg);
while (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
while (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
if (smsc_ctrlc()) {
printf("eeprom_cmd: timeout (E2P_CMD = 0x%08x)\n",
smc911x_reg_read(E2P_CMD));
smc911x_reg_read(dev, E2P_CMD));
return -1;
}
......@@ -90,37 +94,37 @@ static int do_eeprom_cmd(int cmd, u8 reg)
/**
* read_eeprom_reg - read specified register in EEPROM
*/
static u8 read_eeprom_reg(u8 reg)
static u8 read_eeprom_reg(struct eth_device *dev, u8 reg)
{
int ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_READ, reg);
return (ret ? : smc911x_reg_read(E2P_DATA));
int ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_READ, reg);
return (ret ? : smc911x_reg_read(dev, E2P_DATA));
}
/**
* write_eeprom_reg - write specified value into specified register in EEPROM
*/
static int write_eeprom_reg(u8 value, u8 reg)
static int write_eeprom_reg(struct eth_device *dev, u8 value, u8 reg)
{
int ret;
/* enable erasing/writing */
ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_EWEN, reg);
ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN, reg);
if (ret)
goto done;
/* erase the eeprom reg */
ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_ERASE, reg);
ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE, reg);
if (ret)
goto done;
/* write the eeprom reg */
smc911x_reg_write(E2P_DATA, value);
ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_WRITE, reg);
smc911x_reg_write(dev, E2P_DATA, value);
ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE, reg);
if (ret)
goto done;
/* disable erasing/writing */
ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_EWDS, reg);
ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWDS, reg);
done:
return ret;
......@@ -139,7 +143,7 @@ static char *skip_space(char *buf)
/**
* write_stuff - handle writing of MAC registers / eeprom
*/
static void write_stuff(char *line)
static void write_stuff(struct eth_device *dev, char *line)
{
char dest;
char *endp;
......@@ -182,39 +186,39 @@ static void write_stuff(char *line)
/* Finally, execute the command */
if (dest == 'E') {
printf("Writing EEPROM register %02x with %02x\n", reg, value);
write_eeprom_reg(value, reg);
write_eeprom_reg(dev, value, reg);
} else {
printf("Writing MAC register %02x with %08x\n", reg, value);
smc911x_reg_write(CONFIG_DRIVER_SMC911X_BASE + reg, value);
smc911x_reg_write(dev, reg, value);
}
}
/**
* copy_from_eeprom - copy MAC address in eeprom to address registers
*/
static void copy_from_eeprom(void)
static void copy_from_eeprom(struct eth_device *dev)
{
ulong addrl =
read_eeprom_reg(0x01) |
read_eeprom_reg(0x02) << 8 |
read_eeprom_reg(0x03) << 16 |
read_eeprom_reg(0x04) << 24;
read_eeprom_reg(dev, 0x01) |
read_eeprom_reg(dev, 0x02) << 8 |
read_eeprom_reg(dev, 0x03) << 16 |
read_eeprom_reg(dev, 0x04) << 24;
ulong addrh =
read_eeprom_reg(0x05) |
read_eeprom_reg(0x06) << 8;
smc911x_set_mac_csr(ADDRL, addrl);
smc911x_set_mac_csr(ADDRH, addrh);
read_eeprom_reg(dev, 0x05) |
read_eeprom_reg(dev, 0x06) << 8;
smc911x_set_mac_csr(dev, ADDRL, addrl);
smc911x_set_mac_csr(dev, ADDRH, addrh);
puts("EEPROM contents copied to MAC\n");
}
/**
* print_macaddr - print MAC address registers and MAC address in eeprom
*/
static void print_macaddr(void)
static void print_macaddr(struct eth_device *dev)
{
puts("Current MAC Address in MAC: ");
ulong addrl = smc911x_get_mac_csr(ADDRL);
ulong addrh = smc911x_get_mac_csr(ADDRH);
ulong addrl = smc911x_get_mac_csr(dev, ADDRL);
ulong addrh = smc911x_get_mac_csr(dev, ADDRH);
printf("%02x:%02x:%02x:%02x:%02x:%02x\n",
(u8)(addrl), (u8)(addrl >> 8), (u8)(addrl >> 16),
(u8)(addrl >> 24), (u8)(addrh), (u8)(addrh >> 8));
......@@ -222,41 +226,42 @@ static void print_macaddr(void)
puts("Current MAC Address in EEPROM: ");
int i;
for (i = 1; i < 6; ++i)
printf("%02x:", read_eeprom_reg(i));
printf("%02x\n", read_eeprom_reg(i));
printf("%02x:", read_eeprom_reg(dev, i));
printf("%02x\n", read_eeprom_reg(dev, i));
}
/**
* dump_eeprom - dump the whole content of the EEPROM
*/
static void dump_eeprom(void)
static void dump_eeprom(struct eth_device *dev)
{
int i;
puts("EEPROM:\n");
for (i = 0; i < 7; ++i)
printf("%02x: 0x%02x\n", i, read_eeprom_reg(i));
printf("%02x: 0x%02x\n", i, read_eeprom_reg(dev, i));
}
/**
* smc911x_init - get the MAC/EEPROM up and ready for use
*/
static int smc911x_init(void)
static int smc911x_init(struct eth_device *dev)
{
/* See if there is anything there */
if (!smc911x_detect_chip())
if (!smc911x_detect_chip(dev))
return 1;
smc911x_reset();
smc911x_reset(dev);
/* Make sure we set EEDIO/EECLK to the EEPROM */
if (smc911x_reg_read(GPIO_CFG) & GPIO_CFG_EEPR_EN) {
while (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
if (smc911x_reg_read(dev, GPIO_CFG) & GPIO_CFG_EEPR_EN) {
while (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
if (smsc_ctrlc()) {
printf("init: timeout (E2P_CMD = 0x%08x)\n",
smc911x_reg_read(E2P_CMD));
smc911x_reg_read(dev, E2P_CMD));
return 1;
}
smc911x_reg_write(GPIO_CFG, smc911x_reg_read(GPIO_CFG) & ~GPIO_CFG_EEPR_EN);
smc911x_reg_write(dev, GPIO_CFG,
smc911x_reg_read(dev, GPIO_CFG) & ~GPIO_CFG_EEPR_EN);
}
return 0;
......@@ -317,6 +322,11 @@ static char *getline(void)
*/
int smc911x_eeprom(int argc, char *argv[])
{
/* Avoid initializing on stack as gcc likes to call memset() */
struct eth_device dev;
dev.name = __func__;
dev.iobase = CONFIG_SMC911X_BASE;
/* Print the ABI version */
app_startup(argv);
if (XF_VERSION != get_version()) {
......@@ -328,7 +338,7 @@ int smc911x_eeprom(int argc, char *argv[])
/* Initialize the MAC/EEPROM somewhat */
puts("\n");
if (smc911x_init())
if (smc911x_init(&dev))
return 1;
/* Dump helpful usage information */
......@@ -360,11 +370,11 @@ int smc911x_eeprom(int argc, char *argv[])
/* Now parse the command */
switch (line[0]) {
case 'W': write_stuff(line); break;
case 'D': dump_eeprom(); break;
case 'M': dump_regs(); break;
case 'C': copy_from_eeprom(); break;
case 'P': print_macaddr(); break;
case 'W': write_stuff(&dev, line); break;
case 'D': dump_eeprom(&dev); break;
case 'M': dump_regs(&dev); break;
case 'C': copy_from_eeprom(&dev); break;
case 'P': print_macaddr(&dev); break;
unknown_cmd:
default: puts("ERROR: Unknown command!\n\n");
case '?':
......@@ -373,11 +383,3 @@ int smc911x_eeprom(int argc, char *argv[])
}
}
}
#else
int smc911x_eeprom(int argc, char *argv[])
{
puts("Not supported for this board\n");
return 1;
}
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment