Commit c829ff2e authored by Wolfgang Denk's avatar Wolfgang Denk
Browse files

Merge branch 'master' of git://git.denx.de/u-boot-nios

* 'master' of git://git.denx.de/u-boot-nios:
  nios2: Offer ft_board_setup() capability and call fdt_fixup_ethernet().
  board/nios2-generic: Use altera_pio driver and remove board specific driver
  gpio: Add driver for Altera's PIO core
  nios2: Pseudo implement dcache_status/enable/disable()
parents 05622191 4279c53e
......@@ -28,6 +28,7 @@ LIB = $(obj)lib$(CPU).o
START = start.o
SOBJS = exceptions.o
COBJS = cpu.o interrupts.o sysid.o traps.o epcs.o
COBJS += fdt.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
......
......@@ -24,6 +24,7 @@
#include <common.h>
#include <nios2.h>
#include <nios2-io.h>
#include <asm/cache.h>
#if defined (CONFIG_SYS_NIOS_SYSID_BASE)
extern void display_sysid (void);
......@@ -47,3 +48,18 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
nios2_callr(CONFIG_SYS_RESET_ADDR);
return 0;
}
int dcache_status(void)
{
return 1;
}
void dcache_enable(void)
{
flush_dcache(CONFIG_SYS_DCACHE_SIZE, CONFIG_SYS_DCACHELINE_SIZE);
}
void dcache_disable(void)
{
flush_dcache(CONFIG_SYS_DCACHE_SIZE, CONFIG_SYS_DCACHELINE_SIZE);
}
/*
* (C) Copyright 2011, Missing Link Electronics
* Joachim Foerster <joachim@missinglinkelectronics.com>
*
* Taken from arch/powerpc/cpu/ppc4xx/fdt.c:
*
* (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
#include <libfdt.h>
#include <libfdt_env.h>
#include <fdt_support.h>
DECLARE_GLOBAL_DATA_PTR;
void __ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
}
void ft_board_setup(void *blob, bd_t *bd) \
__attribute__((weak, alias("__ft_board_setup")));
void ft_cpu_setup(void *blob, bd_t *bd)
{
/*
* Fixup all ethernet nodes
* Note: aliases in the dts are required for this
*/
fdt_fixup_ethernet(blob);
}
#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */
......@@ -5,8 +5,8 @@
* bit[0] data
* bit[1] output enable
*
* when CONFIG_SYS_GPIO_BASE is not defined, board may provide
* its own driver.
* When CONFIG_SYS_GPIO_BASE is not defined, the board may either
* provide its own driver or the altera_pio driver may be used.
*
* Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
*
......@@ -58,6 +58,15 @@ static inline int gpio_is_valid(int number)
return ((unsigned)number) < CONFIG_SYS_GPIO_WIDTH;
}
#else
#ifdef CONFIG_ALTERA_PIO
extern int altera_pio_init(u32 base, u8 width, char iot,
u32 rstval, u32 negmask,
const char *label);
extern void altera_pio_info(void);
#define gpio_status() altera_pio_info()
#endif
extern int gpio_request(unsigned gpio, const char *label);
extern int gpio_free(unsigned gpio);
extern int gpio_direction_input(unsigned gpio);
......
......@@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_CMD_IDE) += ../common/cfide.o
COBJS-$(CONFIG_EPLED) += ../common/epled.o
COBJS-$(CONFIG_GPIO) += gpio.o
COBJS-$(CONFIG_SEVENSEG) += ../common/sevenseg.o
SOBJS-y := text_base.o
......
......@@ -51,6 +51,7 @@
/* led_pio.s1 is a altera_avalon_pio */
#define LED_PIO_BASE 0x82120870
#define LED_PIO_WIDTH 8
#define LED_PIO_RSTVAL 0x0
/* high_res_timer.s1 is a altera_avalon_timer */
#define CONFIG_SYS_TIMER_BASE 0x82120820
......
/*
* board gpio driver
*
* Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <asm/io.h>
#ifndef CONFIG_SYS_GPIO_BASE
#define ALTERA_PIO_BASE LED_PIO_BASE
#define ALTERA_PIO_WIDTH LED_PIO_WIDTH
#define ALTERA_PIO_DATA (ALTERA_PIO_BASE + 0)
#define ALTERA_PIO_DIR (ALTERA_PIO_BASE + 4)
static u32 pio_data_reg;
static u32 pio_dir_reg;
int gpio_request(unsigned gpio, const char *label)
{
return 0;
}
int gpio_free(unsigned gpio)
{
return 0;
}
int gpio_direction_input(unsigned gpio)
{
u32 mask = 1 << gpio;
writel(pio_dir_reg &= ~mask, ALTERA_PIO_DIR);
return 0;
}
int gpio_direction_output(unsigned gpio, int value)
{
u32 mask = 1 << gpio;
if (value)
pio_data_reg |= mask;
else
pio_data_reg &= ~mask;
writel(pio_data_reg, ALTERA_PIO_DATA);
writel(pio_dir_reg |= mask, ALTERA_PIO_DIR);
return 0;
}
int gpio_get_value(unsigned gpio)
{
u32 mask = 1 << gpio;
if (pio_dir_reg & mask)
return (pio_data_reg & mask) ? 1 : 0;
else
return (readl(ALTERA_PIO_DATA) & mask) ? 1 : 0;
}
void gpio_set_value(unsigned gpio, int value)
{
u32 mask = 1 << gpio;
if (value)
pio_data_reg |= mask;
else
pio_data_reg &= ~mask;
writel(pio_data_reg, ALTERA_PIO_DATA);
}
int gpio_is_valid(int number)
{
return ((unsigned)number) < ALTERA_PIO_WIDTH;
}
#endif
......@@ -26,6 +26,7 @@
#include <netdev.h>
#include <mtd/cfi_flash.h>
#include <asm/io.h>
#include <asm/gpio.h>
void text_base_hook(void); /* nop hook for text_base.S */
......@@ -43,6 +44,13 @@ void early_flash_cmd_reset(void)
int board_early_init_f(void)
{
text_base_hook();
#ifdef CONFIG_ALTERA_PIO
#ifdef LED_PIO_BASE
altera_pio_init(LED_PIO_BASE, LED_PIO_WIDTH, 'o',
LED_PIO_RSTVAL, (1 << LED_PIO_WIDTH) - 1,
"led");
#endif
#endif
#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
early_flash_cmd_reset();
#endif
......
......@@ -36,6 +36,7 @@ COBJS-$(CONFIG_PCA9698) += pca9698.o
COBJS-$(CONFIG_S5P) += s5p_gpio.o
COBJS-$(CONFIG_TEGRA2_GPIO) += tegra2_gpio.o
COBJS-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o
COBJS-$(CONFIG_ALTERA_PIO) += altera_pio.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
......
/*
* Driver for Altera's PIO ip core
*
* Copyright (C) 2011 Missing Link Electronics
* Joachim Foerster <joachim@missinglinkelectronics.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* To use this driver, in your board's config. header:
* #define CONFIG_ALTERA_PIO
* #define CONFIG_SYS_ALTERA_PIO_NUM <number-of-pio-cores>
* #define CONFIG_SYS_ALTERA_PIO_GPIO_NUM <total-number-of-gpios>
* And in your board's early setup routine:
* altera_pio_init(<baseaddr>, <width>, 'i'|'o'|'t',
* <reset-value>, <neg-mask>, "label");
* - 'i'|'o'|'t': PIO is input-only/output-only/tri-state
* - <reset-value>: for correct initial status display, output-only
* - <neg-mask> is meant to be used to in cases of active-low
* GPIOs, such as LEDs and buttons (on/pressed == 0). Each bit
* which is 1 in <neg-mask> inverts the corresponding GPIO's value
* before set/after get. So: gpio_set_value(gpio, 1) => LED on .
*
* Do NOT define CONFIG_SYS_GPIO_BASE !
*
* Optionally, in your board's config. header:
* - To force a GPIO numbering scheme like in Linux ...
* #define CONFIG_GPIO_DOWNTO_NUMBERING
* ... starting with 255 (default)
* #define CONFIG_GPIO_DOWNTO_MAX 255
*/
#include <common.h>
#include <asm/io.h>
#include <asm/gpio.h>
#ifdef CONFIG_GPIO_DOWNTO_NUMBERING
#ifndef CONFIG_GPIO_DOWNTO_MAX
#define CONFIG_GPIO_DOWNTO_MAX 255
#endif
#endif
#define ALTERA_PIO_DATA 0x0
#define ALTERA_PIO_DIR 0x4
#define GPIO_LABEL_SIZE 9
static struct altera_pio {
u32 base;
u8 width;
char iot;
u32 negmask;
u32 sh_data;
u32 sh_dir;
int gidx;
char label[GPIO_LABEL_SIZE];
} pios[CONFIG_SYS_ALTERA_PIO_NUM];
static int pio_num;
static struct altera_pio_gpio {
unsigned num;
struct altera_pio *pio;
char reqlabel[GPIO_LABEL_SIZE];
} gpios[CONFIG_SYS_ALTERA_PIO_GPIO_NUM];
static int pio_gpio_num;
static int altera_pio_gidx(unsigned gpio)
{
int i;
for (i = 0; i < pio_gpio_num; ++i) {
if (gpio == gpios[i].num)
break;
}
if (i >= pio_gpio_num)
return -1;
return i;
}
static struct altera_pio *altera_pio_get_and_mask(unsigned gpio, u32 *mask)
{
int gidx = altera_pio_gidx(gpio);
if (gidx < 0)
return NULL;
if (mask)
*mask = 1 << (gidx - gpios[gidx].pio->gidx);
return gpios[gidx].pio;
}
#define altera_pio_use_gidx(_gidx, _reqlabel) \
{ strncpy(gpios[_gidx].reqlabel, _reqlabel, GPIO_LABEL_SIZE); }
#define altera_pio_unuse_gidx(_gidx) { gpios[_gidx].reqlabel[0] = '\0'; }
#define altera_pio_is_gidx_used(_gidx) (gpios[_gidx].reqlabel[0] != '\0')
static int altera_pio_gpio_init(struct altera_pio *pio, u8 width)
{
u8 gidx = pio_gpio_num;
int i;
if (!width)
return -1;
if ((pio_gpio_num + width) > CONFIG_SYS_ALTERA_PIO_GPIO_NUM)
return -1;
for (i = 0; i < width; ++i) {
#ifdef CONFIG_GPIO_DOWNTO_NUMBERING
gpios[pio_gpio_num + i].num = \
CONFIG_GPIO_DOWNTO_MAX + 1 - gidx - width + i;
#else
gpios[pio_gpio_num + i].num = pio_gpio_num + i;
#endif
gpios[pio_gpio_num + i].pio = pio;
altera_pio_unuse_gidx(pio_gpio_num + i);
}
pio_gpio_num += width;
return gidx;
}
int altera_pio_init(u32 base, u8 width, char iot, u32 rstval, u32 negmask,
const char *label)
{
if (pio_num >= CONFIG_SYS_ALTERA_PIO_NUM)
return -1;
pios[pio_num].base = base;
pios[pio_num].width = width;
pios[pio_num].iot = iot;
switch (iot) {
case 'i':
/* input only */
pios[pio_num].sh_dir = 0;
pios[pio_num].sh_data = readl(base + ALTERA_PIO_DATA);
break;
case 'o':
/* output only */
pios[pio_num].sh_dir = 0xffffffff & ((1 << width) - 1);
pios[pio_num].sh_data = rstval;
break;
case 't':
/* bidir, tri-state */
pios[pio_num].sh_dir = readl(base + ALTERA_PIO_DIR);
pios[pio_num].sh_data = readl(base + ALTERA_PIO_DATA);
break;
default:
return -1;
}
pios[pio_num].negmask = negmask & ((1 << width) - 1);
pios[pio_num].gidx = altera_pio_gpio_init(&pios[pio_num], width);
if (pios[pio_num].gidx < 0)
return -1;
strncpy(pios[pio_num].label, label, GPIO_LABEL_SIZE);
return pio_num++;
}
void altera_pio_info(void)
{
int i;
int j;
int gidx;
u32 mask;
for (i = 0; i < pio_num; ++i) {
printf("Altera PIO % 2d, @0x%08x, "
"width: %u, label: %s\n",
i, pios[i].base, pios[i].width, pios[i].label);
gidx = pios[i].gidx;
for (j = gidx; j < (gidx + pios[i].width); ++j) {
mask = 1 << (j - gidx);
printf("\tGPIO % 4d: %s %s [%c] %s\n",
gpios[j].num,
gpios[j].pio->sh_dir & mask ? "out" : " in",
gpio_get_value(gpios[j].num) ? "set" : "clr",
altera_pio_is_gidx_used(j) ? 'x' : ' ',
gpios[j].reqlabel);
}
}
}
int gpio_request(unsigned gpio, const char *label)
{
int gidx = altera_pio_gidx(gpio);
if (gidx < 0)
return gidx;
if (altera_pio_is_gidx_used(gidx))
return -1;
altera_pio_use_gidx(gidx, label);
return 0;
}
int gpio_free(unsigned gpio)
{
int gidx = altera_pio_gidx(gpio);
if (gidx < 0)
return gidx;
if (!altera_pio_is_gidx_used(gidx))
return -1;
altera_pio_unuse_gidx(gidx);
return 0;
}
int gpio_direction_input(unsigned gpio)
{
u32 mask;
struct altera_pio *pio;
pio = altera_pio_get_and_mask(gpio, &mask);
if (!pio)
return -1;
if (pio->iot == 'o')
return -1;
writel(pio->sh_dir &= ~mask, pio->base + ALTERA_PIO_DIR);
return 0;
}
int gpio_direction_output(unsigned gpio, int value)
{
u32 mask;
struct altera_pio *pio;
pio = altera_pio_get_and_mask(gpio, &mask);
if (!pio)
return -1;
if (pio->iot == 'i')
return -1;
value = (pio->negmask & mask) ? !value : value;
if (value)
pio->sh_data |= mask;
else
pio->sh_data &= ~mask;
writel(pio->sh_data, pio->base + ALTERA_PIO_DATA);
writel(pio->sh_dir |= mask, pio->base + ALTERA_PIO_DIR);
return 0;
}
int gpio_get_value(unsigned gpio)
{
u32 mask;
struct altera_pio *pio;
u32 val;
pio = altera_pio_get_and_mask(gpio, &mask);
if (!pio)
return -1;
if ((pio->sh_dir & mask) || (pio->iot == 'o'))
val = pio->sh_data & mask;
else
val = readl(pio->base + ALTERA_PIO_DATA) & mask;
return (pio->negmask & mask) ? !val : val;
}
void gpio_set_value(unsigned gpio, int value)
{
u32 mask;
struct altera_pio *pio;
pio = altera_pio_get_and_mask(gpio, &mask);
if (!pio)
return;
if (pio->iot == 'i')
return;
value = (pio->negmask & mask) ? !value : value;
if (value)
pio->sh_data |= mask;
else
pio->sh_data &= ~mask;
writel(pio->sh_data, pio->base + ALTERA_PIO_DATA);
return;
}
int gpio_is_valid(int number)
{
int gidx = altera_pio_gidx(number);
if (gidx < 0)
return 1;
return 0;
}
......@@ -63,6 +63,10 @@
/*
* STATUS LED
*/
#define CONFIG_ALTERA_PIO
#define CONFIG_SYS_ALTERA_PIO_NUM 1
#define CONFIG_SYS_ALTERA_PIO_GPIO_NUM LED_PIO_WIDTH
#define CONFIG_STATUS_LED /* Enable status driver */
#define CONFIG_GPIO_LED /* Enable GPIO LED driver */
#define CONFIG_GPIO /* Enable GPIO driver */
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment