Commit c97a9b32 authored by Matt Porter's avatar Matt Porter Committed by Jagannadha Sutradharudu Teki
Browse files

omap5: add qspi support



Add QSPI definitions and clock configuration support.
Signed-off-by: default avatarMatt Porter <matt.porter@linaro.org>
Signed-off-by: default avatarSourav Poddar <sourav.poddar@ti.com>
Reviewed-by: default avatarJagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
parent 0ab449be
......@@ -426,6 +426,10 @@ void enable_basic_clocks(void)
#ifdef CONFIG_DRIVER_TI_CPSW
(*prcm)->cm_gmac_gmac_clkctrl,
#endif
#ifdef CONFIG_TI_QSPI
(*prcm)->cm_l4per_qspi_clkctrl,
#endif
0
};
......@@ -454,6 +458,10 @@ void enable_basic_clocks(void)
clk_modules_explicit_en_essential,
1);
#ifdef CONFIG_TI_QSPI
setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
#endif
/* Enable SCRM OPT clocks for PER and CORE dpll */
setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
OPTFCLKEN_SCRM_PER_MASK);
......
......@@ -921,6 +921,7 @@ struct prcm_regs const dra7xx_prcm = {
.cm_l4per_gpio8_clkctrl = 0x4a009818,
.cm_l4per_mmcsd3_clkctrl = 0x4a009820,
.cm_l4per_mmcsd4_clkctrl = 0x4a009828,
.cm_l4per_qspi_clkctrl = 0x4a009838,
.cm_l4per_uart1_clkctrl = 0x4a009840,
.cm_l4per_uart2_clkctrl = 0x4a009848,
.cm_l4per_uart3_clkctrl = 0x4a009850,
......
......@@ -61,6 +61,9 @@
/* GPMC */
#define OMAP54XX_GPMC_BASE 0x50000000
/* QSPI */
#define QSPI_BASE 0x4B300000
/*
* Hardware Register Details
*/
......
......@@ -15,6 +15,7 @@
#define BOOT_DEVICE_MMC1 5
#define BOOT_DEVICE_MMC2 6
#define BOOT_DEVICE_MMC2_2 7
#define BOOT_DEVICE_SPI 10
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2
......
......@@ -266,6 +266,7 @@ struct prcm_regs {
u32 cm_l4per_mmcsd4_clkctrl;
u32 cm_l4per_msprohg_clkctrl;
u32 cm_l4per_slimbus2_clkctrl;
u32 cm_l4per_qspi_clkctrl;
u32 cm_l4per_uart1_clkctrl;
u32 cm_l4per_uart2_clkctrl;
u32 cm_l4per_uart3_clkctrl;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment