Commit ca9c8a1e authored by Manikandan Pillai's avatar Manikandan Pillai Committed by Ben Warren
Browse files

SMC911x driver fixed for NFS boot



eth_halt() function in the smc911x drivers used to call the
smc911x_reset() function. eth_halt() used to be called after
tftp transfers. This used to put the ethernet chip in reset
while the linux boots up resulting in the ethernet driver
not coming up. NFS boot used to fail as a result.

This patch calls smc911x_shutdown() instead of smc911x_reset().
Some comments received has also been fixed.
Signed-off-by: default avatarManikandan Pillai <mani.pillai@ti.com>
Signed-off-by: default avatarBen Warren <biggerbadderben@gmail.com>
parent e5a3bc24
......@@ -117,6 +117,27 @@ static int smc911x_phy_reset(void)
return 0;
}
static void smc911x_shutdown(void)
{
unsigned int cr;
/* Turn of Rx and TX */
cr = smc911x_get_mac_csr(MAC_CR);
cr &= ~(MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS);
smc911x_set_mac_csr(MAC_CR, cr);
/* Stop Transmission */
cr = smc911x_get_mac_csr(TX_CFG);
cr &= ~(TX_CFG_STOP_TX);
smc911x_set_mac_csr(TX_CFG, cr);
/* Stop receiving packets */
cr = smc911x_get_mac_csr(RX_CFG);
cr &= ~(RX_CFG_RXDOFF);
smc911x_set_mac_csr(RX_CFG, cr);
}
static void smc911x_phy_configure(void)
{
int timeout;
......@@ -225,7 +246,7 @@ int eth_send(volatile void *packet, int length)
void eth_halt(void)
{
smc911x_reset();
smc911x_shutdown();
}
int eth_rx(void)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment