Commit cceb871f authored by wdenk's avatar wdenk
Browse files

* Patch by Yuli Barcohen, 23 Jun 2003:

  Update for MPC8260ADS board

* Patch by Murray Jensen, 23 Jun 2003:
  - cleanup of GCC 3.x compiler warnings
parent 3595ac49
......@@ -2,6 +2,12 @@
Changes since U-Boot 0.3.1:
======================================================================
* Patch by Yuli Barcohen, 23 Jun 2003:
Update for MPC8260ADS board
* Patch by Murray Jensen, 23 Jun 2003:
- cleanup of GCC 3.x compiler warnings
* Patch by Rune Torgersen, 4 Jun 2003:
add large memory support for MPC8266ADS board
......
......@@ -37,6 +37,7 @@
#include <mpc8260.h>
#include <i2c.h>
#include <spd.h>
#include <miiphy.h>
/*
* I/O Port configuration table
......@@ -133,8 +134,8 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
/* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
/* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
/* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
/* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
/* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK13) */
/* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK14) */
/* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
/* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
/* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */
......@@ -142,8 +143,8 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
/* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
/* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
/* PC10 */ { 1, 1, 0, 0, 0, 0 }, /* LXT970 FETHMDC */
/* PC9 */ { 1, 1, 0, 0, 0, 0 }, /* LXT970 FETHMDIO */
/* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* LXT970 FETHMDC */
/* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* LXT970 FETHMDIO */
/* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
/* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
/* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
......@@ -157,8 +158,8 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* Port D */
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
/* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 UART RxD */
/* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 UART TxD */
/* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
/* PD28 */ { 0, 1, 0, 0, 0, 0 }, /* PD28 */
/* PD27 */ { 0, 1, 1, 1, 0, 0 }, /* PD27 */
......@@ -173,14 +174,14 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
/* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
/* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
/* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
/* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
/* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
/* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
/* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
/* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
/* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
/* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
/* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
/* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
/* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
......@@ -192,32 +193,33 @@ const iop_conf_t iop_conf_tab[4][32] = {
}
};
typedef struct bscr_ {
unsigned long bcsr0;
unsigned long bcsr1;
unsigned long bcsr2;
unsigned long bcsr3;
unsigned long bcsr4;
unsigned long bcsr5;
unsigned long bcsr6;
unsigned long bcsr7;
} bcsr_t;
void reset_phy (void)
{
volatile bcsr_t *bcsr = (bcsr_t *) CFG_BCSR;
vu_long *bcsr = (vu_long *)CFG_BCSR;
/* reset the FEC port */
bcsr->bcsr1 &= ~FETH_RST;
bcsr->bcsr1 |= FETH_RST;
bcsr[1] &= ~FETH_RST;
udelay(2);
bcsr[1] |= FETH_RST;
udelay(1000);
#ifdef CONFIG_MII
/*
* Ethernet PHY is configured (by means of configuration pins)
* to work at 10Mb/s only. We reconfigure it using MII
* to advertise all capabilities, including 100Mb/s, and
* restart autonegotiation.
*/
miiphy_write(0, PHY_ANAR, 0x01E1); /* Advertise all capabilities */
miiphy_write(0, PHY_DCR, 0x0000); /* Do not bypass Rx/Tx (de)scrambler */
miiphy_write(0, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
#endif /* CONFIG_MII */
}
int board_pre_init (void)
{
volatile bcsr_t *bcsr = (bcsr_t *) CFG_BCSR;
vu_long *bcsr = (vu_long *)CFG_BCSR;
bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1;
bcsr[1] = ~FETHIEN & ~RS232EN_1;
return 0;
}
......
......@@ -792,15 +792,7 @@ ide_inb(int dev, int port)
#endif /* __PPC__ */
#ifdef __PPC__
__inline__ unsigned ld_le16(const volatile unsigned short *addr)
{
unsigned val;
__asm__ __volatile__ ("lhbrx %0,0,%1" : "=r"(val) : "r"(addr), "m"(*addr));
return val;
}
#ifdef CONFIG_AMIGAONEG3SE
# ifdef CONFIG_AMIGAONEG3SE
static void
output_data_short(int dev, ulong *sect_buf, int words)
{
......@@ -818,7 +810,7 @@ output_data_short(int dev, ulong *sect_buf, int words)
if (words&1)
*pbuf = 0;
}
#endif
# endif /* CONFIG_AMIGAONEG3SE */
static void
input_swap_data(int dev, ulong *sect_buf, int words)
......
......@@ -131,10 +131,10 @@ int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
ulong addr;
/* Interrupts off, enable reset */
__asm__ volatile (" mtspr 81, %r0 \n\t
mfmsr %r3 \n\t
rlwinm %r31,%r3,0,25,23\n\t
mtmsr %r31 \n\t");
__asm__ volatile (" mtspr 81, %r0 \n\t"
" mfmsr %r3 \n\t"
" rlwinm %r31,%r3,0,25,23\n\t"
" mtmsr %r31 \n\t");
/*
* Trying to execute the next instruction at a non-existing address
* should cause a machine check, resulting in reset
......
......@@ -7,6 +7,10 @@
* Note: my board is a PILOT rev.
* Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
*
* (C) Copyright 2003 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
* Added support for SDRAM DIMMs SPD EEPROM, MII.
*
* See file CREDITS for list of people who contributed to this
* project.
*
......@@ -145,9 +149,8 @@
CFG_CMD_IDE | \
CFG_CMD_JFFS2 | \
CFG_CMD_KGDB | \
CFG_CMD_NAND | \
CFG_CMD_MII | \
CFG_CMD_MMC | \
CFG_CMD_NAND | \
CFG_CMD_PCI | \
CFG_CMD_PCMCIA | \
CFG_CMD_SCSI | \
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment