Commit cdd917a4 authored by Wolfgang Denk's avatar Wolfgang Denk
Browse files

Fix build errors and warnings / code cleanup.


Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
parent 5dc210de
......@@ -133,8 +133,9 @@ LIST_8260=" \
#########################################################################
LIST_83xx=" \
MPC8313ERDB MPC832XEMDS MPC8349EMDS MPC8349ITX \
MPC8349ITXGP MPC8360EMDS sbc8349 TQM834x \
MPC8313ERDB_33 MPC8313ERDB_66 MPC832XEMDS MPC8349EMDS \
MPC8349ITX MPC8349ITXGP MPC8360EMDS sbc8349 \
TQM834x \
"
......
......@@ -1646,14 +1646,15 @@ r5200_config : unconfig
MPC8313ERDB_33_config \
MPC8313ERDB_66_config: unconfig
@echo "" >include/config.h ; \
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \
echo "#define CFG_33MHZ" >>include/config.h ; \
echo "...33M ..." ; \
echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \
echo "#define CFG_66MHZ" >>include/config.h ; \
echo "...66M..." ; \
echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb
......@@ -1661,23 +1662,24 @@ MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
MPC832XEMDS_SLAVE_config: unconfig
@echo "" >include/config.h ; \
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
echo -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>include/config.h ; \
echo "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
echo "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \
echo "#define PCI_33M" >>include/config.h ; \
echo "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \
echo "#define PCI_66M" >>include/config.h ; \
echo "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
......@@ -1702,23 +1704,24 @@ MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_HOST_66_config \
MPC8360EMDS_SLAVE_config: unconfig
@echo "" >include/config.h ; \
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
echo -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>include/config.h ; \
echo "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
echo "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \
echo "#define PCI_33M" >>include/config.h ; \
echo "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \
echo "#define PCI_66M" >>include/config.h ; \
echo "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
......@@ -1744,10 +1747,10 @@ MPC8540EVAL_66_slave_config: unconfig
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "... 33 MHz PCI" ; \
echo "... 33 MHz PCI" ; \
else \
echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
echo -n "... 66 MHz PCI" ; \
echo "... 66 MHz PCI" ; \
fi ; \
if [ "$(findstring _slave_,$@)" ] ; then \
echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
......@@ -2008,13 +2011,13 @@ omap1610h2_cs3boot_config \
omap1610h2_cs_autoboot_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \
echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
echo "... configured for CS0 boot"; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \
echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
echo "... configured for CS_AUTO boot"; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
echo "... configured for CS3 boot"; \
fi;
@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
......@@ -2183,11 +2186,12 @@ logodl_config : unconfig
pdnb3_config \
scpu_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring scpu_,$@)" ] ; then \
echo "#define CONFIG_SCPU" >>include/config.h ; \
echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
echo "... on SCPU board variant" ; \
else \
>include/config.h ; \
>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
......@@ -2409,13 +2413,15 @@ suzaku_config: unconfig
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
ml401_config: unconfig
@ >include/config.h
@echo "#define CONFIG_ML401 1" >> include/config.h
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@echo "#define CONFIG_ML401 1" >> $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
xupv2p_config: unconfig
@ >include/config.h
@echo "#define CONFIG_XUPV2P 1" >> include/config.h
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@echo "#define CONFIG_XUPV2P 1" >> $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
#########################################################################
......
......@@ -1252,7 +1252,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
/* sets up the GT properly with information passed in */
int setup_sdram (AUX_MEM_DIMM_INFO * info)
{
ulong tmp, check;
ulong tmp;
ulong tmp_sdram_mode = 0; /* 0x141c */
ulong tmp_dunit_control_low = 0; /* 0x1404 */
int i;
......
......@@ -321,10 +321,10 @@ static ulong strfractoint(uchar *strptr)
mulconst = 1;
for (i = 0; i < decarr_len; i++)
mulconst *= 10;
decval = simple_strtoul(decarr, NULL, 10);
decval = simple_strtoul((char *)decarr, NULL, 10);
}
intval = simple_strtoul(intarr, NULL, 10);
intval = simple_strtoul((char *)intarr, NULL, 10);
intval = intval * mulconst;
retval = intval + decval;
......@@ -362,7 +362,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
corepll = strfractoint(argv[3]);
corepll = strfractoint((uchar *)argv[3]);
val = val + set_px_corepll(corepll);
val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
if (val == 3) {
......@@ -410,7 +410,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
read_from_px_regs(0);
read_from_px_regs_altbank(0);
val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
corepll = strfractoint(argv[4]);
corepll = strfractoint((uchar *)argv[4]);
val = val + set_px_corepll(corepll);
val = val + set_px_mpxpll(simple_strtoul(argv[5],
NULL, 10));
......
......@@ -63,9 +63,10 @@ int checkboard(void)
uint devdisr = gur->devdisr;
uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
#ifdef DEBUG
uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
#endif
if ((io_sel == 2 || io_sel == 3 || io_sel == 5
|| io_sel == 6 || io_sel == 7 || io_sel == 0xF)
&& !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
......
......@@ -68,7 +68,7 @@ int mac_show(void)
mac_data.date[5],
mac_data.date[6]);
for (i = 0; i < 8; i++) {
sprintf(ethaddr[i],
sprintf((char *)ethaddr[i],
"%02x:%02x:%02x:%02x:%02x:%02x",
mac_data.mac[i][0],
mac_data.mac[i][1],
......@@ -79,10 +79,10 @@ int mac_show(void)
printf("MAC %d %s\n", i, ethaddr[i]);
}
setenv("ethaddr", ethaddr[0]);
setenv("eth1addr", ethaddr[1]);
setenv("eth2addr", ethaddr[2]);
setenv("eth3addr", ethaddr[3]);
setenv("ethaddr", (char *)ethaddr[0]);
setenv("eth1addr", (char *)ethaddr[1]);
setenv("eth2addr", (char *)ethaddr[2]);
setenv("eth3addr", (char *)ethaddr[3]);
return 0;
}
......@@ -236,7 +236,7 @@ int mac_read_from_eeprom(void)
} else {
for (i = 0; i < 4; i++) {
if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) {
sprintf(ethaddr[i],
sprintf((char *)ethaddr[i],
"%02x:%02x:%02x:%02x:%02x:%02x",
mac_data.mac[i][0],
mac_data.mac[i][1],
......@@ -244,10 +244,10 @@ int mac_read_from_eeprom(void)
mac_data.mac[i][3],
mac_data.mac[i][4],
mac_data.mac[i][5]);
sprintf(enetvar,
sprintf((char *)enetvar,
i ? "eth%daddr" : "ethaddr",
i);
setenv(enetvar, ethaddr[i]);
setenv((char *)enetvar, (char *)ethaddr[i]);
}
}
}
......
......@@ -122,7 +122,9 @@ const uint dsp_table_fast[] =
#define TINY_AUTOINC_BASE_ADDR 0x0
static int hpi_activate(void);
#if 0
static void hpi_inactivate(void);
#endif
static void dsp_reset(void);
static int hpi_write_inc(u32 addr, u32 *data, u32 count);
......@@ -133,7 +135,9 @@ static u32 hpi_read_noinc(u32 addr);
int hpi_test(void);
static int hpi_write_addr_test(u32 addr);
static int hpi_read_write_test(u32 addr, u32 data);
#ifdef DO_TINY_TEST
static int hpi_tiny_autoinc_test(void);
#endif /* DO_TINY_TEST */
#endif /* CONFIG_SPC1920_HPI_TEST */
......@@ -185,6 +189,7 @@ static int hpi_activate(void)
return 0;
}
#if 0
/* turn off the host port interface */
static void hpi_inactivate(void)
{
......@@ -200,6 +205,7 @@ static void hpi_inactivate(void)
/* currently always on TBD */
}
#endif
/* reset the DSP */
static void dsp_reset(void)
......@@ -570,6 +576,7 @@ static int hpi_read_write_test(u32 addr, u32 data)
return 0;
}
#ifdef DO_TINY_TEST
static int hpi_tiny_autoinc_test(void)
{
int i;
......@@ -599,5 +606,6 @@ static int hpi_tiny_autoinc_test(void)
}
return 0;
}
#endif /* DO_TINY_TEST */
#endif /* CONFIG_SPC1920_HPI_TEST */
......@@ -71,7 +71,7 @@ static __inline__ void set_dec(unsigned long val)
}
/* interrupt is not supported yet */
int interrupt_init_cpu(unsigned *decrementer_count)
int interrupt_init_cpu(unsigned long *decrementer_count)
{
return 0;
}
......@@ -107,7 +107,7 @@ int interrupt_init(void)
return ret;
decrementer_count = get_tbclk() / CFG_HZ;
debug("interrupt init: tbclk() = %d MHz, decrementer_count = %d\n",
debug("interrupt init: tbclk() = %d MHz, decrementer_count = %ld\n",
(get_tbclk() / 1000000),
decrementer_count);
......@@ -158,7 +158,7 @@ void timer_interrupt(struct pt_regs *regs)
timestamp++;
ppcDcbf(&timestamp);
ppcDcbf((unsigned long)&timestamp);
/* Restore Decrementer Count */
set_dec(decrementer_count);
......
......@@ -248,7 +248,7 @@
#endif
#ifdef CONFIG_POST
u #define CONFIG_CMD_DIAG
#define CONFIG_CMD_DIAG
#endif
/*
......
......@@ -106,6 +106,7 @@
#undef CONFIG_CMD_IRQ
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_KGDB
#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MII
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_NAND
......
......@@ -227,6 +227,7 @@
#undef CONFIG_CMD_HWFLOW
#undef CONFIG_CMD_IDE
#undef CONFIG_CMD_KGDB
#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_NAND
#undef CONFIG_CMD_PCMCIA
......@@ -405,9 +406,9 @@
#define CFG_BCR 0x100C0000
#define CFG_SIUMCR 0x0A200000
#define CFG_SCCR SCCR_DFBRG01
#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00001801
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801)
#define CFG_OR0_PRELIM 0xFF800876
#define CFG_BR1_PRELIM CFG_BCSR | 0x00001801
#define CFG_BR1_PRELIM (CFG_BCSR | 0x00001801)
#define CFG_OR1_PRELIM 0xFFFF8010
/*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/
......
......@@ -165,6 +165,7 @@
#undef CONFIG_CMD_IDE
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_KGDB
#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_NAND
#undef CONFIG_CMD_PCMCIA
......
......@@ -265,7 +265,7 @@
#define CONFIG_I2C_CMD_TREE
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
#define CFG_I2C2_OFFSET 0x3100
......
......@@ -119,6 +119,7 @@
#undef CONFIG_CMD_IRQ
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_MII
#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_NAND
#undef CONFIG_CMD_PCI
......
......@@ -321,6 +321,7 @@
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_KGDB
#undef CONFIG_CMD_MII
#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_NAND
#undef CONFIG_CMD_PCI
......
......@@ -294,7 +294,7 @@
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
#definef CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS
/* undef this to save memory */
#define CFG_LONGHELP
......
......@@ -199,6 +199,7 @@
#undef CONFIG_CMD_IDE
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_NAND
#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_PCMCIA
#undef CONFIG_CMD_PCI
......
......@@ -375,9 +375,9 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */
#define CFG_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */
#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, /* CFG_FLASH_BASE2 */ }
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
......
......@@ -25,29 +25,30 @@
/*
* Debug
*
* DEBUG - Define this is you want extra debug info
* GTREGREAD - Required to build with debug
* do_bdinfo - Required to build with debug
* DEBUG - Define this is you want extra debug info
* GTREGREAD - Required to build with debug
* do_bdinfo - Required to build with debug
*/
#undef DEBUG
#define GTREGREAD(x) 0xFFFFFFFF
#ifdef DEBUG
#define GTREGREAD(x) 0xFFFFFFFF
#define do_bdinfo(a,b,c,d)
#endif
/*
* CPU type
*
* CONFIG_7xx - We have a 750 or 755 CPU
* CONFIG_74xx - We have a 7400 CPU
* CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
* CONFIG_BUS_CLK - System bus clock in Hz
* CONFIG_7xx - We have a 750 or 755 CPU
* CONFIG_74xx - We have a 7400 CPU
* CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
* CONFIG_BUS_CLK - System bus clock in Hz
*/
#define CONFIG_7xx
#undef CONFIG_74xx
#undef CONFIG_ALTIVEC
#define CONFIG_BUS_CLK 66000000
#define CONFIG_BUS_CLK 66000000
/*
......@@ -97,18 +98,18 @@
* Serial configuration
*
* CONFIG_CONS_INDEX - Serial console port number (COM1)
* CONFIG_BAUDRATE - Serial speed
* CONFIG_BAUDRATE - Serial speed
*/
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 9600
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 9600
/*
* PCI config
*
* CONFIG_PCI - Enable PCI bus
* CONFIG_PCI_PNP - Enable Plug & Play support
* CONFIG_PCI - Enable PCI bus
* CONFIG_PCI_PNP - Enable Plug & Play support
* CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup
*/
......@@ -120,9 +121,9 @@
/*
* Network config
*
* CONFIG_NET_MULTI - Support for multiple network interfaces
* CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
* CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
* CONFIG_NET_MULTI - Support for multiple network interfaces
* CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
* CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
*/
#define CONFIG_NET_MULTI
......@@ -145,7 +146,7 @@
* Boot config
*
* CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot
* CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
* CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
*/
#define CONFIG_BOOTCOMMAND \
......@@ -169,79 +170,79 @@
*
* This board runs in a standard CHRP (Map-B) configuration.
*
* Type Start End Size Width Chip Sel
* Type Start End Size Width Chip Sel
* ----------- ----------- ----------- ------- ------- --------
* SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
* User LED's 0x78000000 RCS3
* UART 0x7C000000 RCS2
* Mailbox 0xFF000000 RCS1
* Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
* SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
* User LED's 0x78000000 RCS3
* UART 0x7C000000 RCS2
* Mailbox 0xFF000000 RCS1
* Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
*
* Flash sectors are laid out as follows.
*
* Sector Start End Size Comments
* Sector Start End Size Comments
* ------- ----------- ----------- ------- -----------
* 0 0xFFC00000 0xFFC3FFFF 256KB
* 1 0xFFC40000 0xFFC7FFFF 256KB
* 2 0xFFC80000 0xFFCBFFFF 256KB
* 3 0xFFCC0000 0xFFCFFFFF 256KB
* 4 0xFFD00000 0xFFD3FFFF 256KB
* 5 0xFFD40000 0xFFD7FFFF 256KB
* 6 0xFFD80000 0xFFDBFFFF 256KB
* 7 0xFFDC0000 0xFFDFFFFF 256KB
* 8 0xFFE00000 0xFFE3FFFF 256KB
* 9 0xFFE40000 0xFFE7FFFF 256KB
* 10 0xFFE80000 0xFFEBFFFF 256KB
* 11 0xFFEC0000 0xFFEFFFFF 256KB
* 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here
* 13 0xFFF40000 0xFFF7FFFF 256KB
* 14 0xFFF80000 0xFFFBFFFF 256KB
* 15 0xFFFC0000 0xFFFDFFFF 128KB
* 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here
* 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here
* 18 0xFFFF0000 0xFFFFFFFF 64KB
* 0 0xFFC00000 0xFFC3FFFF 256KB
* 1 0xFFC40000 0xFFC7FFFF 256KB
* 2 0xFFC80000 0xFFCBFFFF 256KB
* 3 0xFFCC0000 0xFFCFFFFF 256KB
* 4 0xFFD00000 0xFFD3FFFF 256KB
* 5 0xFFD40000 0xFFD7FFFF 256KB
* 6 0xFFD80000 0xFFDBFFFF 256KB
* 7 0xFFDC0000 0xFFDFFFFF 256KB
* 8 0xFFE00000 0xFFE3FFFF 256KB
* 9 0xFFE40000 0xFFE7FFFF 256KB
* 10 0xFFE80000 0xFFEBFFFF 256KB
* 11 0xFFEC0000 0xFFEFFFFF 256KB
* 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here
* 13 0xFFF40000 0xFFF7FFFF 256KB
* 14 0xFFF80000 0xFFFBFFFF 256KB
* 15 0xFFFC0000 0xFFFDFFFF 128KB
* 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here
* 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here
* 18 0xFFFF0000 0xFFFFFFFF 64KB
*/
/*
* SDRAM config - see memory map details above.
*
* CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
* CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
* CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
* CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_SDRAM_SIZE 0x04000000
#define CFG_SDRAM_BASE 0x00000000
#define CFG_SDRAM_SIZE 0x04000000
/*
* Flash config - see memory map details above.
*
* CFG_FLASH_BASE - Start address of flash memory
* CFG_FLASH_SIZE - Total size of contiguous flash mem
* CFG_FLASH_BASE - Start address of flash memory
* CFG_FLASH_SIZE - Total size of contiguous flash mem
* CFG_FLASH_ERASE_TOUT - Erase timeout in ms
* CFG_FLASH_WRITE_TOUT - Write timeout in ms
* CFG_MAX_FLASH_BANKS - Number of banks of flash on board
* CFG_MAX_FLASH_SECT - Number of sectors in a bank
*/
#define CFG_FLASH_BASE 0xFFC00000
#define CFG_FLASH_SIZE 0x00400000
#define CFG_FLASH_BASE 0xFFC00000