* Fix ICU862 environment problem

* Fix RAM size detection for RMU board

* Implement "reset" for MGT5100/MPC5200 systems

CHANGELOG

 ======================================================================
-Changes for U-Boot 0.4.5:
+Changes for U-Boot 0.4.7:
+======================================================================
+
+* Fix ICU862 environment problem
+
+* Fix RAM size detection for RMU board
+
+* Implement "reset" for MGT5100/MPC5200 systems
+
+======================================================================
+Changes for U-Boot 0.4.6:
 ======================================================================
 
 * Make Ethernet autonegotiation on INCA-IP work for all clock rates;
@@ -14,6 +24,10 @@ Changes for U-Boot 0.4.5:
 * Patch by Richard Woodruff, 8 Aug 2003:
   Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
 
+======================================================================
+Changes for U-Boot 0.4.5:
+======================================================================
+
 * Update for TQM board defaults:
   disable clocks_in_mhz, enable boot count limit
 

board/icecube/icecube.c

@@ -25,6 +25,7 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 
+#ifndef CFG_RAMBOOT
 static long int dram_size(long int *base, long int maxsize)
 {
 	volatile long int *addr;
@@ -86,11 +87,14 @@ static void sdram_start (int hi_addr)
 	/* normal operation */
 	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000 | hi_addr_bit;
 }
+#endif
 
 long int initdram (int board_type)
 {
-	ulong test1, test2, dramsize = 0;
+	ulong dramsize = 0;
 #ifndef CFG_RAMBOOT
+	ulong test1, test2;
+
 	/* configure SDRAM start/end */
 #if defined(CONFIG_MPC5200)
 	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
@@ -133,8 +137,11 @@ long int initdram (int board_type)
 #else
 #ifdef CONFIG_MGT5100
 	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
+#else
+	dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20);
 #endif
-#endif
+#endif /* CFG_RAMBOOT */
 	/* return total ram size */
 	return dramsize;
 }

board/icu862/u-boot.lds

@@ -136,11 +136,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  . = ALIGN(256 * 1024);
-  .ppcenv	:
-  {
-    common/environment.o (.ppcenv)
-  }
   _end = . ;
   PROVIDE (end = .);
 }

board/rmu/rmu.c

@@ -96,7 +96,7 @@ long int initdram (int board_type)
 {
     volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
-    long int size10 ;
+    long int size9 ;
 
     upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
 
@@ -109,7 +109,7 @@ long int initdram (int board_type)
     memctl->memc_or1 = CFG_OR1_PRELIM;
     memctl->memc_br1 = CFG_BR1_PRELIM;
 
-    memctl->memc_mamr = CFG_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */
+    memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
 
     udelay(200);
 
@@ -122,13 +122,20 @@ long int initdram (int board_type)
 
     udelay (1000);
 
-	/* Check Bank 0 Memory Size
-	 * try 10 column mode
+	/* Check Bank 0 Memory Size,
+	 * 9 column mode
 	 */
 
-	size10 = dram_size (CFG_MAMR_10COL, (ulong *)SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE) ;
+	size9 = dram_size (CFG_MAMR_9COL, (ulong *)SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE) ;
 
-    return (size10);
+	/*
+	 * Final mapping:
+	 */
+
+	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+	udelay (1000);
+
+    return (size9);
 }
 
 /* ------------------------------------------------------------------------- */

cpu/mpc5xxx/cpu.c

@@ -54,31 +54,17 @@ int checkcpu (void)
 int
 do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-	ulong msr, addr;
-
-	*(vu_long *)MPC5XXX_CDM_SRESET &= ~(1 << 16);	/* Checkstop Reset enable */
-
+	ulong msr;
 	/* Interrupts and MMU off */
 	__asm__ __volatile__ ("mfmsr    %0":"=r" (msr):);
 
 	msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
 	__asm__ __volatile__ ("mtmsr    %0"::"r" (msr));
 
-	/*
-	 * Trying to execute the next instruction at a non-existing address
-	 * should cause a machine check, resulting in reset
-	 */
-#ifdef CFG_RESET_ADDRESS
-	addr = CFG_RESET_ADDRESS;
-#else
-	/*
-	 * note: when CFG_MONITOR_BASE points to a RAM address, CFG_MONITOR_BASE
-	 * - sizeof (ulong) is usually a valid address. Better pick an address
-	 * known to be invalid on your system and assign it to CFG_RESET_ADDRESS.
-	 */
-	addr = CFG_MONITOR_BASE - sizeof (ulong);
-#endif
-	((void (*)(void)) addr) ();
+	/* Charge the watchdog timer */
+	*(vu_long *)(MPC5XXX_GPT0_COUNTER) = 0xf;
+	*(vu_long *)(MPC5XXX_GPT0_ENABLE) = 0x9004; /* wden|ce|timer_ms */
+
 	return 1;
 
 }

cpu/mpc8xx/start.S

@@ -76,9 +76,6 @@
 	GOT_ENTRY(__init_end)
 	GOT_ENTRY(_end)
 	GOT_ENTRY(__bss_start)
-#if defined(CONFIG_ICU862)
-	GOT_ENTRY(environment)
-#endif
 	END_GOT
 
 /*
@@ -617,16 +614,7 @@ clear_bss:
 	 * Now clear BSS segment
 	 */
 	lwz	r3,GOT(__bss_start)
-#if defined(CONFIG_ICU862)
-	/*
-	 * For the FADS - the environment is the very last item in flash.
-	 * The real .bss stops just before environment starts, so only
-	 * clear up to that point.
-	 */
-	lwz	r4,GOT(environment)
-#else
 	lwz	r4,GOT(_end)
-#endif
 
 	cmplw	0, r3, r4
 	beq	6f

include/configs/ICU862.h

@@ -196,7 +196,7 @@
 #define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
 #else
-#define CFG_MONITOR_LEN (272 << 10) /* Reserve 272 kB for Monitor */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
 #endif
 #define CFG_MONITOR_BASE	TEXT_BASE
 #define	CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/

include/configs/IceCube.h

@@ -131,9 +131,7 @@
  */
 #define CFG_MBAR		0xf0000000
 #define CFG_SDRAM_BASE		0x00000000
-#ifdef CONFIG_MPC5200
 #define CFG_DEFAULT_MBAR	0x80000000
-#endif
 
 /* Use SRAM until RAM will be available */
 #define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM

include/configs/rmu.h

@@ -291,12 +291,12 @@
  *
  */
 #define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM base	*/
-#define	SDRAM_MAX_SIZE		0x01000000	/* max 16 MB */
+#define	SDRAM_MAX_SIZE		0x08000000	/* max 128 MB */
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
 #define CFG_OR_TIMING_SDRAM	0x00000E00
 
-#define CFG_OR1_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
+#define CFG_OR1_PRELIM	(0xF0000000 | CFG_OR_TIMING_SDRAM ) /* map 256 MB */
 #define CFG_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /* RPXLITE mem setting */
@@ -321,8 +321,8 @@
  * MAMR settings for SDRAM
  */
 
-/* 10 column SDRAM */
-#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
 

include/mpc5xxx.h

@@ -78,6 +78,7 @@
 #define MPC5XXX_CDM		(CFG_MBAR + 0x0200)
 #define MPC5XXX_LPB		(CFG_MBAR + 0x0300)
 #define MPC5XXX_ICTL		(CFG_MBAR + 0x0500)
+#define MPC5XXX_GPT		(CFG_MBAR + 0x0600)
 #define MPC5XXX_GPIO		(CFG_MBAR + 0x0b00)
 #define MPC5XXX_PCI		(CFG_MBAR + 0x0d00)
 #define MPC5XXX_SDMA		(CFG_MBAR + 0x1200)
@@ -183,6 +184,10 @@
 #define MPC5XXX_ICTL_PER_STS	(MPC5XXX_ICTL + 0x0030)
 #define MPC5XXX_ICTL_BUS_STS	(MPC5XXX_ICTL + 0x0038)
 
+/* General Purpose Timers registers */
+#define MPC5XXX_GPT0_ENABLE		(MPC5XXX_GPT + 0x0)
+#define MPC5XXX_GPT0_COUNTER		(MPC5XXX_GPT + 0x4)
+
 /* Programmable Serial Controller (PSC) status register bits */
 #define PSC_SR_CDE		0x0080
 #define PSC_SR_RXRDY		0x0100

include/version.h

@@ -24,6 +24,6 @@
 #ifndef	__VERSION_H__
 #define	__VERSION_H__
 
-#define	U_BOOT_VERSION	"U-Boot 0.4.6"
+#define	U_BOOT_VERSION	"U-Boot 0.4.7"
 
 #endif	/* __VERSION_H__ */