Commit e07f4a80 authored by Ricardo Ribalda Delgado's avatar Ricardo Ribalda Delgado Committed by Stefan Roese

ppc44x: Unification of virtex5 pp440 boards

This patch provides an unificated way of handling xilinx v5 ppc440 boards.

It unificates 3 different things:

1) Source code
A new board called ppc440-generic has been created. This board includes
a generic tlb initialization (Maps the whole memory into virtual) and
defines board_pre_init, checkboard, initdram and get_sys_info weakly,
so, they can be replaced by specific functions.

If a new board needs to redefine any of the previous functions
(specific initialization) it can create a new directory with the
specific initializations needed. (see the example ml507 board).

2) Configuration file
Common configurations are located under configs/xilinx-ppc440.h, this
header file interpretes the xparameters file generated by EDK and
configurates u-boot in correspondence. Example: if there is a Temac,
allows CMD_CONFIG_NET
Specific configuration are located under specific configuration file.
(see the example ml507 board)

3) Makefile
Some work has been done in order to not duplicate work in the Main
Makefile. Please see the attached code.

In order to support new boards they can be implemented in the next way:

a) Simple Generic Board  (90% of the time)
Using EDK generates a new xparameters.h file, replace
ppc440-generic/xparameters.h  and run make xilinx-ppc440-generic_config
&& make

b) Simple Boards with special u-boot parameters (9 % of the time)
Create a new file under configs for it (use ml507.h as example) and
change your paramaters. Create a new Makefile paragraph and compile

c) Complex boards (1% of the time)
Create a new folder for the board, like the ml507

Finally, it adds support for the Avnet FX30T Evaluation board, following
the new generic structure:

Cheap board by Avnet for evaluating the Virtex5 FX technology.

This patch adds support for:
 - UartLite
 - 16MB Flash
 - 64MB RAM

Prior using U-boot in this board, read carefully the ERRATA by Avnet
to solve some memory initialization issues.
Signed-off-by: default avatarRicardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: default avatarStefan Roese <sr@denx.de>
parent f158c3d5
......@@ -405,7 +405,8 @@ D: Atmel AT91CAP9ADK support
N: Ricardo Ribalda Delgado
E: ricardo.ribalda@uam.es
D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460
D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval
D: Virtex ppc440 generic architecture
W: http://www.ii.uam.es/~rribalda
N: Stefan Roese
......
......@@ -314,6 +314,8 @@ Daniel Poirot <dan.poirot@windriver.com>
Ricardo Ribalda <ricardo.ribalda@uam.es>
ml507 PPC440x5
v5fx30teval PPC440x5
xilinx-pp440-generic PPC440x5
Stefan Roese <sr@denx.de>
......
......@@ -230,12 +230,16 @@ LIST_4xx=" \
sequoia_nand \
taihu \
taishan \
v5fx30teval \
v5fx30teval_flash \
VOH405 \
VOM405 \
W7OLMC \
W7OLMG \
walnut \
WUH405 \
xilinx-ppc440-generic \
xilinx-ppc440-generic_flash \
XPEDITE1K \
yellowstone \
yosemite \
......
......@@ -1356,16 +1356,17 @@ ML2_config: unconfig
ml300_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
ml507_flash_config: unconfig
ml507_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ml507
@cp $(obj)board/xilinx/ml507/u-boot-rom.lds $(obj)board/xilinx/ml507/u-boot.lds
@echo "TEXT_BASE = 0xFE360000" > $(obj)board/xilinx/ml507/config.tmp
@$(MKCONFIG) $(@:_flash_config=) ppc ppc4xx ml507 xilinx
@echo "LDSCRIPT := $(obj)board/xilinx/ppc440-generic/u-boot-rom.lds" > $(obj)board/xilinx/ml507/config.mk
@echo "TEXT_BASE := 0xFE360000" >> $(obj)board/xilinx/ml507/config.mk
@$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
ml507_config: unconfig
ml507_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ml507
@cp $(obj)board/xilinx/ml507/u-boot-ram.lds $(obj)board/xilinx/ml507/u-boot.lds
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml507 xilinx
@echo "LDSCRIPT := $(obj)board/xilinx/ppc440-generic/u-boot-ram.lds" > $(obj)board/xilinx/ml507/config.mk
@echo "TEXT_BASE := 0x04000000" >> $(obj)board/xilinx/ml507/config.mk
@$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
ocotea_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
......@@ -1461,6 +1462,18 @@ taihu_config: unconfig
taishan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
v5fx30teval_config: unconfig
@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
@echo "LDSCRIPT := $(obj)board/xilinx/ppc440-generic/u-boot-ram.lds" > $(obj)board/avnet/v5fx30teval/config.mk
@echo "TEXT_BASE := 0x03000000" >> $(obj)board/avnet/v5fx30teval/config.mk
@$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
v5fx30teval_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
@echo "LDSCRIPT := $(obj)board/xilinx/ppc440-generic/u-boot-rom.lds" > $(obj)board/avnet/v5fx30teval/config.mk
@echo "TEXT_BASE := 0xFF1C0000" >> $(obj)board/avnet/v5fx30teval/config.mk
@$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
VOH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
......@@ -1479,6 +1492,18 @@ sycamore_config: unconfig
WUH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
xilinx-ppc440-generic_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic/
@echo "LDSCRIPT := $(obj)board/xilinx/ppc440-generic/u-boot-rom.lds" > $(obj)board/xilinx/ppc440-generic/config.mk
@echo "TEXT_BASE := 0xFE360000" >> $(obj)board/xilinx/ppc440-generic/config.mk
@$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
xilinx-ppc440-generic_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic/
@echo "LDSCRIPT := $(obj)board/xilinx/ppc440-generic/u-boot-ram.lds" > $(obj)board/xilinx/ppc440-generic/config.mk
@echo "TEXT_BASE := 0x04000000" >> $(obj)board/xilinx/ppc440-generic/config.mk
@$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
XPEDITE1K_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
......
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# (C) Copyright 2008
# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
# This work has been supported by: Qtechnology http://qtec.com/
#
# See file CREDITS for list of people who contributed to this
# project.
......@@ -20,8 +21,7 @@
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
TEXT_BASE = 0x04000000
endif
COBJS += $(BOARD).o
include $(SRCTREE)/board/xilinx/ppc440-generic/Makefile
/*
* (C) Copyright 2008
* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
* This work has been supported by: QTechnology http://qtec.com/
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <config.h>
#include <common.h>
#include <asm/processor.h>
int checkboard(void)
{
puts("Avnet Virtex 5 FX30 Evaluation Board\n");
return 0;
}
/*
* (C) Copyright 2008
* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
* This work has been supported by: QTechnology http://qtec.com/
* based on xparameters.h by Xilinx
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef XPARAMETER_H
#define XPARAMETER_H
#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000
#define XPAR_INTC_0_BASEADDR 0x81800000
#define XPAR_UARTLITE_0_BASEADDR 0x84000000
#define XPAR_FLASH_MEM0_BASEADDR 0xFF000000
#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
#define XPAR_CORE_CLOCK_FREQ_HZ 400000000
#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13
#define XPAR_UARTLITE_0_BAUDRATE 9600
#endif
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# (C) Copyright 2008
# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
# This work has been supported by: Qtechnology http://qtec.com/
#
# See file CREDITS for list of people who contributed to this
# project.
......@@ -21,38 +22,6 @@
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
ifneq ($(OBJTREE),$(SRCTREE))
endif
COBJS += $(BOARD).o
INCS :=
CFLAGS += $(INCS)
HOST_CFLAGS += $(INCS)
LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o
SOBJS = init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################
include $(SRCTREE)/board/xilinx/ppc440-generic/Makefile
......@@ -20,28 +20,9 @@
#include <common.h>
#include <asm/processor.h>
int board_pre_init(void)
{
return 0;
}
int checkboard(void)
{
puts("ML507 Board\n");
puts("Xilinx ML507 Board\n");
return 0;
}
phys_size_t initdram(int board_type)
{
return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
CFG_SDRAM_SIZE_MB * 1024 * 1024);
}
void get_sys_info(sys_info_t * sysInfo)
{
sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
sysInfo->freqPCI = 0;
return;
}
......@@ -21,15 +21,14 @@
#ifndef XPARAMETER_H
#define XPARAMETER_H
#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000
#define XPAR_IIC_EEPROM_BASEADDR 0x81600000
#define XPAR_INTC_0_BASEADDR 0x81800000
#define XPAR_LLTEMAC_0_BASEADDR 0x81C00000
#define XPAR_UARTLITE_0_BASEADDR 0x84000000
#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000
#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
#define XPAR_CORE_CLOCK_FREQ_HZ 400000000
#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13
#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000
#define XPAR_IIC_EEPROM_BASEADDR 0x81600000
#define XPAR_INTC_0_BASEADDR 0x81800000
#define XPAR_UARTLITE_0_BASEADDR 0x84000000
#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000
#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
#define XPAR_CORE_CLOCK_FREQ_HZ 400000000
#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13
#define XPAR_UARTLITE_0_BAUDRATE 9600
#endif
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2008
# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
# Work supported by Qtechnology http://www.qtec.com
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
ifneq ($(OBJTREE),$(SRCTREE))
endif
INCS :=
CFLAGS += $(INCS)
HOST_CFLAGS += $(INCS)
LIB = $(obj)lib$(BOARD).a
COBJS += $(SRCTREE)/board/xilinx/ppc440-generic/xilinx_ppc440_generic.o
SOBJS += $(SRCTREE)/board/xilinx/ppc440-generic/init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################
/*
* (C) Copyright 2008
* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
* This work has been supported by: QTechnology http://qtec.com/
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <ppc_asm.tmpl>
#include <config.h>
#include <asm-ppc/mmu.h>
.section .bootpg,"ax"
.globl tlbtab
tlbtab:
tlbtab_start
tlbentry(0x00000000, SZ_256M, 0x00000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0x10000000, SZ_256M, 0x10000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0x20000000, SZ_256M, 0x20000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0x30000000, SZ_256M, 0x30000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0x40000000, SZ_256M, 0x40000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0x50000000, SZ_256M, 0x50000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0x60000000, SZ_256M, 0x60000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0x70000000, SZ_256M, 0x70000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0x80000000, SZ_256M, 0x80000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0x90000000, SZ_256M, 0x90000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0xa0000000, SZ_256M, 0xa0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0xb0000000, SZ_256M, 0xb0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0xc0000000, SZ_256M, 0xc0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0xd0000000, SZ_256M, 0xd0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0xe0000000, SZ_256M, 0xe0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbentry(0xf0000000, SZ_256M, 0xf0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
tlbtab_end
/*
* (C) Copyright 2008
* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
* This work has been supported by: QTechnology http://qtec.com/
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <config.h>
#include <common.h>
#include <asm/processor.h>
int __board_pre_init(void)
{
return 0;
}
int board_pre_init(void) __attribute__((weak, alias("__board_pre_init")));
int __checkboard(void)
{
puts("Xilinx PPC440 Generic Board\n");
return 0;
}
int checkboard(void) __attribute__((weak, alias("__checkboard")));
phys_size_t __initdram(int board_type)
{
return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
CFG_SDRAM_SIZE_MB * 1024 * 1024);
}
phys_size_t initdram(int) __attribute__((weak, alias("__initdram")));
void __get_sys_info(sys_info_t *sysInfo)
{
sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
sysInfo->freqPCI = 0;
return;
}
void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info")));
/*
* (C) Copyright 2008
* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
* This work has been supported by: QTechnology http://qtec.com/
* based on xparameters-ml507.h by Xilinx
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef XPARAMETER_H
#define XPARAMETER_H
#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000
#define XPAR_IIC_EEPROM_BASEADDR 0x81600000
#define XPAR_INTC_0_BASEADDR 0x81800000
#define XPAR_UARTLITE_0_BASEADDR 0x84000000
#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000
#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
#define XPAR_CORE_CLOCK_FREQ_HZ 400000000
#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13
#define XPAR_UARTLITE_0_BAUDRATE 9600
#endif
......@@ -17,106 +17,33 @@
#ifndef __CONFIG_H
#define __CONFIG_H
/*
#define DEBUG
#define ET_DEBUG
*/
/*CPU*/
#define CONFIG_XILINX_ML507 1
#define CONFIG_XILINX_440 1
/*CPU*/
#define CONFIG_440 1
#define CONFIG_4xx 1
#define CONFIG_XILINX_ML507 1
#include "../board/xilinx/ml507/xparameters.h"
/*Mem Map*/
#define CFG_SDRAM_BASE 0x0
#define CFG_SDRAM_SIZE_MB 256
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_MONITOR_LEN ( 192 * 1024 )
#define CFG_MALLOC_LEN ( CFG_ENV_SIZE + 128 * 1024 )
/*Uart*/
#define CONFIG_XILINX_UARTLITE
#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE
#define CFG_BAUDRATE_TABLE { XPAR_UARTLITE_0_BAUDRATE }
#define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR
/*Cmd*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_ELF
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_JFFS2
#define CONFIG_JFFS2_CMDLINE
#undef CONFIG_CMD_I2C
#undef CONFIG_CMD_DTT
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_PING
#undef CONFIG_CMD_DHCP
#undef CONFIG_CMD_EEPROM
#undef CONFIG_CMD_IMLS
/*Env*/
#define CFG_ENV_IS_IN_FLASH
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x20000
#define CFG_ENV_SECT_SIZE 0x20000
#define CFG_ENV_OFFSET 0x340000
#define CFG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
#define CFG_ENV_OFFSET 0x340000
#define CFG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
/*Misc*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "board:/# " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE ( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 )
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x00400000 /* default load address */
#define CFG_EXTBDINFO 1 /* Extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_LOOPW /* enable loopw command */
#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE /* include version env variable */
#define CFG_CONSOLE_INFO_QUIET /* don't print console @ startup */
#define CFG_HUSH_PARSER /* Use the HUSH parser */
#define CFG_PROMPT_HUSH_PS2 "> "
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
#define CFG_BOOTMAPSZ ( 8 << 20 ) /* Initial Memory map for Linux */
#define CFG_PROMPT "ml507:/# " /* Monitor Command Prompt */
#define CONFIG_PREBOOT "echo U-Boot is up and runnining;"
/*Stack*/
#define CFG_INIT_RAM_ADDR 0x800000 /* Initial RAM address */
#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET ( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE )
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/*Speed*/
#define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ
/*Flash*/
#define CFG_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
#define CFG_FLASH_SIZE (32*1024*1024)
#define CFG_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
#define CFG_FLASH_EMPTY_INFO 1
#define CFG_MAX_FLASH_BANKS 1
#define CFG_MAX_FLASH_SECT 259
#define CFG_FLASH_PROTECTION
#define MTDIDS_DEFAULT "nor0=ml507-flash"
#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)"
/*Generic Configs*/
#include <configs/xilinx-ppc440.h>
#endif /* __CONFIG_H */
/*
* (C) Copyright 2008
* (C) Copyright 2008
* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
* This work has been supported by: QTechnology http://qtec.com/
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
......@@ -12,42 +11,39 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <ppc_asm.tmpl>
#include <config.h>
#include <asm-ppc/mmu.h>
.section .bootpg,"ax"
.globl tlbtab
tlbtab:
tlbtab_start
/* SDRAM */
tlbentry(XPAR_DDR2_SDRAM_MEM_BASEADDR, SZ_256M, CFG_SDRAM_BASE, 0,
AC_R | AC_W | AC_X | SA_G | SA_I)
/* UART */
tlbentry(XPAR_UARTLITE_0_BASEADDR, SZ_64K, XPAR_UARTLITE_0_BASEADDR, 0,
AC_R | AC_W | SA_G | SA_I)
/* PIC */
tlbentry(XPAR_INTC_0_BASEADDR, SZ_64K, XPAR_INTC_0_BASEADDR, 0,
AC_R | AC_W | SA_G | SA_I)
#ifdef XPAR_IIC_EEPROM_BASEADDR
/* I2C */
tlbentry(XPAR_IIC_EEPROM_BASEADDR, SZ_64K, XPAR_IIC_EEPROM_BASEADDR, 0,
AC_R | AC_W | SA_G | SA_I)
#endif
#ifdef XPAR_LLTEMAC_0_BASEADDR
/* Net */
tlbentry(XPAR_LLTEMAC_0_BASEADDR, SZ_64K, XPAR_LLTEMAC_0_BASEADDR, 0,
AC_R | AC_W | SA_G | SA_I)
#endif
#ifdef XPAR_FLASH_MEM0_BASEADDR
/*Flash*/
tlbentry(XPAR_FLASH_MEM0_BASEADDR, SZ_256M, XPAR_FLASH_MEM0_BASEADDR, 0,
AC_R | AC_W | AC_X | SA_G | SA_I)
#endif
tlbtab_end
#ifndef __CONFIG_H
#define __CONFIG_H
/*CPU*/
#define CONFIG_440 1
#define CONFIG_XILINX_ML507 1
#include "../board/avnet/v5fx30teval/xparameters.h"
/*Mem Map*/
#define CFG_SDRAM_SIZE_MB 64
/*Env*/
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x20000
#define CFG_ENV_SECT_SIZE 0x20000
#define CFG_ENV_OFFSET 0x1A0000
#define CFG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
/*Misc*/
#define CFG_PROMPT "v5fx30t:/# " /* Monitor Command Prompt */
#define CONFIG_PREBOOT "echo U-Boot is up and runnining;"
/*Flash*/
#define CFG_FLASH_SIZE (16*1024*1024)
#define CFG_MAX_FLASH_SECT 131
#define MTDIDS_DEFAULT "nor0=v5fx30t-flash"
#define MTDPARTS_DEFAULT "mtdparts=v5fx30t-flash:-(user)"
/*Generic Configs*/
#include <configs/xilinx-ppc440.h>
#endif /* __CONFIG_H */
/*
* (C) Copyright 2008
* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
* This work has been supported by: QTechnology http://qtec.com/
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*CPU*/
#define CONFIG_440 1
#define CONFIG_XILINX_PPC440_GENERIC 1
#include "../board/xilinx/ppc440-generic/xparameters.h"