Commit e64987a8 authored by Anatolij Gustschin's avatar Anatolij Gustschin Committed by Wolfgang Denk

85xx: socrates: Enable Lime support.

This patch adds Lime GDC support together with support for the PWM
backlight control through the w83782d chip.  The reset pin of the
latter is attached to GPIO, so we need to reset it in
early_board_init_r.
Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
parent 3e79b588
......@@ -36,6 +36,7 @@
* 0x0000_0000 0x2fff_ffff DDR 512M
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xc000_0000 0xc00f_ffff FPGA 1M
* 0xc800_0000 0xcbff_ffff LIME 64M
* 0xe000_0000 0xe00f_ffff CCSR 1M (mapped by CCSRBAR)
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
* 0xfc00_0000 0xffff_ffff FLASH 64M
......@@ -48,11 +49,12 @@
struct law_entry law_table[] = {
SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
SET_LAW(CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
SET_LAW(CFG_LBC_FLASH_BASE, LAW_SIZE_64M, LAW_TRGT_IF_LBC),
SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
#if defined(CFG_FPGA_BASE)
SET_LAW(CFG_FPGA_BASE, LAWAR_SIZE_1M, LAW_TRGT_IF_LBC),
#endif
SET_LAW(CFG_LIME_BASE, LAWAR_SIZE_64M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);
......@@ -173,6 +173,12 @@ void local_bus_init (void)
/* Init UPMA for FPGA access */
out_be32 (&lbc->mamr, 0x44440); /* Use a customer-supplied value */
upmconfig (UPMA, (uint *)UPMTableA, sizeof(UPMTableA)/sizeof(int));
if (getenv("lime")) {
/* Init UPMB for Lime controller access */
out_be32 (&lbc->mbmr, 0x444440); /* Use a customer-supplied value */
upmconfig (UPMB, (uint *)UPMTableB, sizeof(UPMTableB)/sizeof(int));
}
}
#if defined(CONFIG_PCI)
......@@ -239,6 +245,14 @@ ft_board_setup(void *blob, bd_t *bd)
val[i++] = gd->bd->bi_flashstart;
val[i++] = gd->bd->bi_flashsize;
if (getenv("lime")) {
/* Fixup LIME mapping */
val[i++] = 2; /* chip select number */
val[i++] = 0; /* always 0 */
val[i++] = CFG_LIME_BASE;
val[i++] = CFG_LIME_SIZE;
}
/* Fixup FPGA mapping */
val[i++] = 3; /* chip select number */
val[i++] = 0; /* always 0 */
......@@ -252,3 +266,187 @@ ft_board_setup(void *blob, bd_t *bd)
fdt_strerror(rc));
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#include <i2c.h>
#include <mb862xx.h>
#include <video_fb.h>
#define CFG_LIME_SRST ((CFG_LIME_BASE) + 0x01FC002C)
#define CFG_LIME_CCF ((CFG_LIME_BASE) + 0x01FC0038)
#define CFG_LIME_MMR ((CFG_LIME_BASE) + 0x01FCFFFC)
/* Lime clock frequency */
#define CFG_LIME_CLK_100MHZ 0x00000
#define CFG_LIME_CLK_133MHZ 0x10000
/* SDRAM parameter */
#define CFG_LIME_MMR_VALUE 0x4157BA63
#define DISPLAY_WIDTH 800
#define DISPLAY_HEIGHT 480
#define DEFAULT_BRIGHTNESS 25
#define BACKLIGHT_ENABLE (1 << 31)
extern GraphicDevice mb862xx;
static const gdc_regs init_regs [] =
{
{0x0100, 0x00010f00},
{0x0020, 0x801901df},
{0x0024, 0x00000000},
{0x0028, 0x00000000},
{0x002c, 0x00000000},
{0x0110, 0x00000000},
{0x0114, 0x00000000},
{0x0118, 0x01df0320},
{0x0004, 0x041f0000},
{0x0008, 0x031f031f},
{0x000c, 0x017f0349},
{0x0010, 0x020c0000},
{0x0014, 0x01df01e9},
{0x0018, 0x00000000},
{0x001c, 0x01e00320},
{0x0100, 0x80010f00},
{0x0, 0x0}
};
const gdc_regs *board_get_regs (void)
{
return init_regs;
}
/* Returns Lime base address */
unsigned int board_video_init (void)
{
if (!getenv("lime"))
return 0;
/*
* Reset Lime controller
*/
out_be32((void *)CFG_LIME_SRST, 0x1);
udelay(200);
/* Set Lime clock to 133MHz */
out_be32((void *)CFG_LIME_CCF, CFG_LIME_CLK_133MHZ);
/* Delay required */
udelay(300);
/* Set memory parameters */
out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
mb862xx.winSizeX = DISPLAY_WIDTH;
mb862xx.winSizeY = DISPLAY_HEIGHT;
mb862xx.gdfIndex = GDF_15BIT_555RGB;
mb862xx.gdfBytesPP = 2;
return CFG_LIME_BASE;
}
#define W83782D_REG_CFG 0x40
#define W83782D_REG_BANK_SEL 0x4e
#define W83782D_REG_ADCCLK 0x4b
#define W83782D_REG_BEEP_CTRL 0x4d
#define W83782D_REG_BEEP_CTRL2 0x57
#define W83782D_REG_PWMOUT1 0x5b
#define W83782D_REG_VBAT 0x5d
static int w83782d_hwmon_init(void)
{
u8 buf;
if (i2c_read(CFG_I2C_W83782G_ADDR, W83782D_REG_CFG, 1, &buf, 1))
return -1;
i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_CFG, 0x80);
i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_BANK_SEL, 0);
i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_ADCCLK, 0x40);
buf = i2c_reg_read(CFG_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL);
i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL,
buf | 0x80);
i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL2, 0);
i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_PWMOUT1, 0x47);
i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_VBAT, 0x01);
buf = i2c_reg_read(CFG_I2C_W83782G_ADDR, W83782D_REG_CFG);
i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_CFG,
(buf & 0xf4) | 0x01);
return 0;
}
static void board_backlight_brightness(int br)
{
u32 reg;
u8 buf;
u8 old_buf;
/* Select bank 0 */
if (i2c_read(CFG_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
goto err;
else
buf = old_buf & 0xf8;
if (i2c_write(CFG_I2C_W83782G_ADDR, 0x4e, 1, &buf, 1))
goto err;
if (br > 0) {
/* PWMOUT1 duty cycle ctrl */
buf = 255 / (100 / br);
if (i2c_write(CFG_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
goto err;
/* LEDs on */
reg = in_be32((void *)(CFG_FPGA_BASE + 0x0c));
if (!(reg & BACKLIGHT_ENABLE));
out_be32((void *)(CFG_FPGA_BASE + 0x0c),
reg | BACKLIGHT_ENABLE);
} else {
buf = 0;
if (i2c_write(CFG_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
goto err;
/* LEDs off */
reg = in_be32((void *)(CFG_FPGA_BASE + 0x0c));
reg &= ~BACKLIGHT_ENABLE;
out_be32((void *)(CFG_FPGA_BASE + 0x0c), reg);
}
/* Restore previous bank setting */
if (i2c_write(CFG_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
goto err;
return;
err:
printf("W83782G I2C access failed\n");
}
void board_backlight_switch (int flag)
{
char * param;
int rc;
if (w83782d_hwmon_init())
printf ("hwmon IC init failed\n");
if (flag) {
param = getenv("brightness");
rc = param ? simple_strtol(param, NULL, 10) : -1;
if (rc < 0)
rc = DEFAULT_BRIGHTNESS;
} else {
rc = 0;
}
board_backlight_brightness(rc);
}
#if defined(CONFIG_CONSOLE_EXTRA_INFO)
/*
* Return text to be printed besides the logo.
*/
void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
strcpy (info, " Board: Socrates");
} else {
info [0] = '\0';
}
}
#endif
......@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
/*
* TLB 0: 64M Non-cacheable, guarded
* TLB 1: 64M Non-cacheable, guarded
* 0xfc000000 64M FLASH
* Out of reset this entry is only 4K.
*/
......@@ -80,6 +80,17 @@ struct fsl_e_tlb_entry tlb_table[] = {
0, 4, BOOKE_PAGESZ_1M, 1),
#endif
/*
* TLB 5: 64M Non-cacheable, guarded
* 0xc8000000 16M LIME GDC framebuffer
* 0xc9fc0000 256K LIME GDC MMIO
* (0xcbfc0000 256K LIME GDC MMIO)
* MMIO is relocatable and could be at 0xcbfc0000
*/
SET_TLB_ENTRY(1, CFG_LIME_BASE, CFG_LIME_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 5, BOOKE_PAGESZ_64M, 1),
/*
* TLB 6: 64M Non-cacheable, guarded
* 0xe000_0000 1M CCSRBAR
......
......@@ -52,4 +52,24 @@ static const unsigned int UPMTableA[] =
0xffffec00, 0xffffec00, 0xffffec00, 0xffffec01 /* Words 60 to 63 */
};
/* LIME UPM B Table Configuration Code */
static unsigned int UPMTableB[] =
{
0x0ffefc00, 0x0ffcfc00, 0x0ffcfc00, 0x0ffcfc00, /* Words 0 to 3 */
0x0ffcfc00, 0x0ffcfc00, 0x0ffcfc04, 0x0ffffc01, /* Words 4 to 7 */
0x0ffefc00, 0x0ffcfc00, 0x0ffcfc00, 0x0ffcfc00, /* Words 8 to 11 */
0x0ffcfc00, 0x0ffcfc00, 0x0ffcfc04, 0x0ffcfc04, /* Words 12 to 15 */
0x0ffcfc04, 0x0ffcfc04, 0x0ffcfc04, 0x0ffcfc04, /* Words 16 to 19 */
0x0ffcfc04, 0x0ffcfc04, 0x0ffffc00, 0xfffffc01, /* Words 20 to 23 */
0x0cfffc00, 0x00fffc00, 0x00fffc00, 0x00fffc00, /* Words 24 to 27 */
0x00fffc00, 0x00fffc00, 0x00fffc04, 0x0ffffc01, /* Words 28 to 31 */
0x0cfffc00, 0x00fffc00, 0x00fffc00, 0x00fffc00, /* Words 32 to 35 */
0x00fffc00, 0x00fffc00, 0x00fffc04, 0x00fffc04, /* Words 36 to 39 */
0x00fffc04, 0x00fffc04, 0x00fffc04, 0x00fffc04, /* Words 40 to 43 */
0x00fffc04, 0x00fffc04, 0x0ffffc00, 0xfffffc01, /* Words 44 to 47 */
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 48 to 51 */
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 52 to 55 */
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 56 to 59 */
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 /* Words 60 to 63 */
};
#endif
......@@ -357,7 +357,8 @@ void *video_hw_init (void)
board_disp_init();
#endif
#if defined(CONFIG_LWMON5) && !(CONFIG_POST & CFG_POST_SYSMON)
#if (defined(CONFIG_LWMON5) || \
defined(CONFIG_SOCRATES)) && !(CONFIG_POST & CFG_POST_SYSMON)
/* Lamp on */
board_backlight_switch (1);
#endif
......
......@@ -186,6 +186,26 @@
#define NAND_MAX_CHIPS 1
#define CONFIG_CMD_NAND
/* LIME GDC */
#define CFG_LIME_BASE 0xc8000000
#define CFG_LIME_SIZE 0x04000000 /* 64 MB */
#define CFG_BR2_PRELIM 0xc80018a1 /* UPMB, 32-bit */
#define CFG_OR2_PRELIM 0xfc000000 /* 64 MB */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_MB862xx
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_CONSOLE_EXTRA_INFO
#define VIDEO_FB_16BPP_PIXEL_SWAP
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CFG_CONSOLE_IS_IN_ENV
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_SPLASH_SCREEN
#define CONFIG_VIDEO_BMP_GZIP
#define CFG_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */
/* Serial Port */
#define CONFIG_CONS_INDEX 1
......@@ -228,6 +248,9 @@
#define CONFIG_RTC_RX8025 /* Use Epson rx8025 rtc via i2c */
#define CFG_I2C_RTC_ADDR 0x32 /* at address 0x32 */
/* I2C W83782G HW-Monitoring IC */
#define CFG_I2C_W83782G_ADDR 0x28 /* W83782G address */
/* I2C temp sensor */
/* Socrates uses Maxim's DS75, which is compatible with LM75 */
#define CONFIG_DTT_LM75 1
......@@ -324,6 +347,7 @@
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_USB
#define CONFIG_CMD_EXT2 /* EXT2 Support */
#define CONFIG_CMD_BMP
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment