Commit e7f533cd authored by Zhao Qiang's avatar Zhao Qiang Committed by York Sun
Browse files

powerpc/mpc85xx: modify erratum A007186



T2080 v1.0 has this errata while v1.1 has fixed
this errata by hardware, add a new function has_errata_a007186
to check the SVR_SOC_VER, SVR_MAJ and SVR_MIN first,
if the sil has errata a007186, then run the errata code,
if not, doesn't run the code.
Signed-off-by: default avatarZhao Qiang <B45475@freescale.com>
Reviewed-by: default avatarYork Sun <yorksun@freescale.com>
parent 31530e0b
......@@ -271,7 +271,8 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
puts("Work-around for Erratum USB14 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A007186
puts("Work-around for Erratum A007186 enabled\n");
if (has_erratum_a007186())
puts("Work-around for Erratum A007186 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
puts("Work-around for Erratum A006593 enabled\n");
......
......@@ -11,6 +11,7 @@
#include <asm/processor.h>
#include <asm/fsl_law.h>
#include <asm/errno.h>
#include <asm/fsl_errata.h>
#include "fsl_corenet2_serdes.h"
#ifdef CONFIG_SYS_FSL_SRDS_1
......@@ -203,7 +204,7 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
sel = (sfp_spfr0 >> FUSE_VAL_SHIFT) & FUSE_VAL_MASK;
if (sel == 0x01 || sel == 0x02) {
if (has_erratum_a007186() && (sel == 0x01 || sel == 0x02)) {
for (pll_num = 0; pll_num < SRDS_MAX_BANK; pll_num++) {
pll_status = in_be32(&srds_regs->bank[pll_num].pllcr0);
debug("A007186: pll_num=%x pllcr0=%x\n",
......
......@@ -27,3 +27,27 @@ static inline bool has_erratum_a006379(void)
}
#endif
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A007186
static inline bool has_erratum_a007186(void)
{
u32 svr = get_svr();
u32 soc = SVR_SOC_VER(svr);
switch (soc) {
case SVR_T4240:
return IS_SVR_REV(svr, 2, 0);
case SVR_T4160:
return IS_SVR_REV(svr, 2, 0);
case SVR_B4860:
return IS_SVR_REV(svr, 2, 0);
case SVR_B4420:
return IS_SVR_REV(svr, 2, 0);
case SVR_T2081:
case SVR_T2080:
return IS_SVR_REV(svr, 1, 0);
}
return false;
}
#endif
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment