Commit f09eb52b authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Scott Wood
Browse files

mtd: denali: set some registers after nand_scan_ident()



Some but not all of implementations of the Denali NAND controller
have hardware circuits to detect the device parameters such as
page_size, erase_size, etc.  Even on those SoCs with such hardware
supported, the hardware is known to detect wrong parameters for some
nasty (almost buggy) NAND devices.  The device parameters detected
during nand_scan_ident() are more trustworthy.

This commit sets some hardware registers to mtd->pagesize,
mtd->oobsize, etc. in the code between nand_scan_ident() and
nand_scan_tail().
Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Chin Liang See <clsee@altera.com>
parent 65e4145a
......@@ -1209,6 +1209,17 @@ static int denali_init(struct denali_nand_info *denali)
nand_oob.eccbytes = denali->nand.ecc.bytes;
denali->nand.ecc.layout = &nand_oob;
writel(denali->mtd->erasesize / denali->mtd->writesize,
denali->flash_reg + PAGES_PER_BLOCK);
writel(denali->nand.options & NAND_BUSWIDTH_16 ? 1 : 0,
denali->flash_reg + DEVICE_WIDTH);
writel(denali->mtd->writesize,
denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
writel(denali->mtd->oobsize,
denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
if (readl(denali->flash_reg + DEVICES_CONNECTED) == 0)
writel(1, denali->flash_reg + DEVICES_CONNECTED);
/* override the default operations */
denali->nand.ecc.read_page = denali_read_page;
denali->nand.ecc.read_page_raw = denali_read_page_raw;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment