Commit f4f0df09 authored by Siarhei Siamashka's avatar Siarhei Siamashka Committed by Hans de Goede
Browse files

sun7i: Add defconfig for MSI Primo73 tablet



This patch uses the same DRAM settings as in the pre-installed
Android firmware. The LCD display is supported too.
Signed-off-by: default avatarSiarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
parent 80e8669f
......@@ -148,6 +148,19 @@ config TARGET_MINI_X
bool "MINI_X"
depends on MACH_SUN4I
config TARGET_MSI_PRIMO73
bool "MSI Primo73 (7\" tablet)"
depends on MACH_SUN7I
---help---
The MSI Primo73 is an A20 based tablet, with 1G RAM, 16G NAND,
1024x600 TN LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
rear camera, 3000 mAh battery, gt911 touchscreen, mma8452 accelerometer
and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
(both volume buttons are also connected to the UBOOT_SEL pin). The
external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
OTG and 3.5mm headphone jack. More details are available at
http://linux-sunxi.org/MSI_Primo73
config TARGET_MSI_PRIMO81
bool "MSI Primo81 (7.85\" tablet)"
depends on MACH_SUN6I
......
......@@ -67,6 +67,11 @@ M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Ippo_q8h_v5_defconfig
MSI-PRIMO73 BOARD
M: Siarhei Siamashka <siarhei.siamashka@gmail.com>
S: Maintained
F: configs/MSI_Primo73_defconfig
MSI-PRIMO81 BOARD
M: Siarhei Siamashka <siarhei.siamashka@gmail.com>
S: Maintained
......
......@@ -31,6 +31,7 @@ obj-$(CONFIG_TARGET_MELE_A1000G) += dram_sun4i_360_1024_iow8.o
obj-$(CONFIG_TARGET_MELE_M3) += dram_sun7i_384_1024_iow16.o
obj-$(CONFIG_TARGET_MINI_X) += dram_sun4i_360_512.o
obj-$(CONFIG_TARGET_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o
obj-$(CONFIG_TARGET_MSI_PRIMO73) += dram_sun7i_384_1024_iow16.o
obj-$(CONFIG_TARGET_PCDUINO3) += dram_linksprite_pcduino3.o
obj-$(CONFIG_TARGET_QT840A) += dram_sun7i_384_512_busw16_iow16.o
obj-$(CONFIG_TARGET_R7DONGLE) += dram_r7dongle.o
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
CONFIG_FDTFILE="sun7i-a20-primo73.dtb"
CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:60000,le:60,ri:160,up:13,lo:12,hs:100,vs:10,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_USB_KEYBOARD=n
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
+S:CONFIG_TARGET_MSI_PRIMO73=y
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment