Commit f942f7d9 authored by Otavio Salvador's avatar Otavio Salvador Committed by Stefano Babic
Browse files

mx23: SPL: Add boot mode support



This adds the boot mode support for i.MX23 processors.
Signed-off-by: default avatarOtavio Salvador <otavio@ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
parent a8b2884d
...@@ -51,12 +51,21 @@ void early_delay(int delay) ...@@ -51,12 +51,21 @@ void early_delay(int delay)
#define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) #define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
static const iomux_cfg_t iomux_boot[] = { static const iomux_cfg_t iomux_boot[] = {
#if defined(CONFIG_MX23)
MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
#elif defined(CONFIG_MX28)
MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
MX28_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD,
MX28_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD,
MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
#endif
}; };
static uint8_t mxs_get_bootmode_index(void) static uint8_t mxs_get_bootmode_index(void)
...@@ -68,6 +77,21 @@ static uint8_t mxs_get_bootmode_index(void) ...@@ -68,6 +77,21 @@ static uint8_t mxs_get_bootmode_index(void)
/* Setup IOMUX of bootmode pads to GPIO */ /* Setup IOMUX of bootmode pads to GPIO */
mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot)); mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot));
#if defined(CONFIG_MX23)
/* Setup bootmode pins as GPIO input */
gpio_direction_input(MX23_PAD_LCD_D00__GPIO_1_0);
gpio_direction_input(MX23_PAD_LCD_D01__GPIO_1_1);
gpio_direction_input(MX23_PAD_LCD_D02__GPIO_1_2);
gpio_direction_input(MX23_PAD_LCD_D03__GPIO_1_3);
gpio_direction_input(MX23_PAD_LCD_D05__GPIO_1_5);
/* Read bootmode pads */
bootmode |= (gpio_get_value(MX23_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0;
bootmode |= (gpio_get_value(MX23_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1;
bootmode |= (gpio_get_value(MX23_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2;
bootmode |= (gpio_get_value(MX23_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3;
bootmode |= (gpio_get_value(MX23_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5;
#elif defined(CONFIG_MX28)
/* Setup bootmode pins as GPIO input */ /* Setup bootmode pins as GPIO input */
gpio_direction_input(MX28_PAD_LCD_D00__GPIO_1_0); gpio_direction_input(MX28_PAD_LCD_D00__GPIO_1_0);
gpio_direction_input(MX28_PAD_LCD_D01__GPIO_1_1); gpio_direction_input(MX28_PAD_LCD_D01__GPIO_1_1);
...@@ -83,6 +107,7 @@ static uint8_t mxs_get_bootmode_index(void) ...@@ -83,6 +107,7 @@ static uint8_t mxs_get_bootmode_index(void)
bootmode |= (gpio_get_value(MX28_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; bootmode |= (gpio_get_value(MX28_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3;
bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4; bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4;
bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5;
#endif
for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) { for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) {
masked = bootmode & mxs_boot_modes[i].boot_mask; masked = bootmode & mxs_boot_modes[i].boot_mask;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment