1. 15 Apr, 2004 1 commit
    • wdenk's avatar
      * Patches by Pantelis Antoniou, 30 Mar 2004: · 04a85b3b
      wdenk authored
        - add auto-complete support to the U-Boot CLI
        - add support for NETTA and NETPHONE boards; fix NETVIA board
      
      * Patch by Yuli Barcohen, 28 Mar 2004:
        - Add support for MPC8272 family including MPC8247/8248/8271/8272
        - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
        - Change configuration method for MPC8260ADS family
      04a85b3b
  2. 12 Apr, 2004 1 commit
  3. 08 Apr, 2004 1 commit
  4. 25 Mar, 2004 3 commits
  5. 23 Mar, 2004 4 commits
    • wdenk's avatar
      * Patch by Stephen Williams, 19 March 2004 · 6fb6af6d
      wdenk authored
        Increase speed of sector reads from SystemACE,
        shorten poll timeout and remove a useless reset
      
      * Patch by Tolunay Orkun, 19 Mar 2004:
        Make GigE PHY 1000Mbps Speed/Duplex detection conditional
        (CONFIG_PHY_GIGE)
      
      * Patch by Brad Kemp, 18 Mar 2004:
        prevent machine checks during a PCI scan
      
      * Patch by Pierre Aubert, 18 Mar 2004:
        Fix string cleaning in IDE identification
      6fb6af6d
    • wdenk's avatar
      * Patch by Carl Riechers, 17 Mar 2004: · 27aa8186
      wdenk authored
        Ignore '\0' characters in console input for use with telnet and
        telco pads.
      
      * Patch by Leon Kukovec, 17 Mar 2004:
        typo fix for strswab prototype #ifdef
      27aa8186
    • wdenk's avatar
      * Patches by Thomas Viehweger, 16 Mar 2004: · 4b9206ed
      wdenk authored
        - show PCI clock frequency on MPC8260 systems
        - add FCC_PSMR_RMII flag for HiP7 processors
        - in do_jffs2_fsload(), take load address from load_addr if not set
          explicit, update load_addr otherwise
        - replaced printf by putc/puts when no formatting is needed
          (smaller code size, faster execution)
      4b9206ed
    • wdenk's avatar
      * Add start-up delay to make sure power has stabilized before · efa329cb
      wdenk authored
        attempting to switch on USB on SX1 board.
      
      * Patch by Josef Wagner, 18 Mar 2004:
        - Add support for MicroSys XM250 board (PXA255)
        - Add support for MicroSys PM828 board (MPC8280)
        - Add support for 32 MB Flash on PM825/826
        - new SDRAM refresh rate for PM825/PM826
        - added support for MicroSys PM520 (MPC5200)
        - replaced Query by Identify command in CPU86/flash.c
          to support 28F160F3B
      
      * Fix wrap around problem with udelay() on ARM920T
      
      * Add support for Macronix flash on TRAB board
      efa329cb
  6. 17 Mar, 2004 1 commit
  7. 14 Mar, 2004 5 commits
    • wdenk's avatar
      Code cleanup; make several boards compile & link. · 42dfe7a1
      wdenk authored
      42dfe7a1
    • wdenk's avatar
      * Patches by Travis Sawyer, 12 Mar 2004: · 855a496f
      wdenk authored
        - Fix Gigabit Ethernet support for 440GX
        - Add Gigabit Ethernet Support to MII PHY utilities
      
      * Patch by Brad Kemp, 12 Mar 2004:
        Fixes for drivers/cfi_flash.c:
        - Better support for x8/x16 implementations
        - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
        - Added defines for AMD command and address constants
      
      * Patch by Leon Kukovec, 12 Mar 2004:
        Fix get_dentfromdir() to correctly handle deleted dentries
      
      * Patch by George G. Davis, 11 Mar 2004:
        Remove hard coded network settings in TI OMAP1610 H2
        default board config
      
      * Patch by George G. Davis, 11 Mar 2004:
        add support for ADS GraphicsClient+ board.
      855a496f
    • wdenk's avatar
      * Patch by Pierre Aubert, 11 Mar 2004: · 4b248f3f
      wdenk authored
        - add bitmap command and splash screen support in cfb console
        - add [optional] origin in the bitmap display command
      
      * Patch by Travis Sawyer, 11 Mar 2004:
        Fix ocotea board early init interrupt setup.
      
      * Patch by Thomas Viehweger, 11 Mar 2004:
        Remove redundand code; add  PCI-specific bits to include/mpc8260.h
      4b248f3f
    • wdenk's avatar
      * Patch by Tolunay Orkun, 5 Mar 2004: · 4d13cbad
      wdenk authored
        Fix early board initialization for Cogent CSB272 board
      
      * Patch by Ed Okerson, 3 Mar 2004:
        fix CFI flash writes for little endian systems
      
      * Patch by Reinhard Meyer, 01 Mar 2004:
        generalize USB and IDE support for MPC5200 with according
        changes to IceCube.h and TOP5200.h
        add Am29LV256 256 MBit FLASH support for TOP5200 boards
        add info about USB and IDE to README
      4d13cbad
    • wdenk's avatar
      * Patch by Yuli Barcohen, 4 Mar 2004: · c3f9d493
      wdenk authored
        Fix problems with GCC 3.3.x which changed handling of global
        variables explicitly initialized to zero (now in .bss instead of
        .data as before).
      
      * Patch by Leon Kukovec, 02 Mar 2004:
        add strswab() to fix IDE LBA capacity, firmware and model numbers
        on little endian machines
      
      * Patch by Masami Komiya, 02 Mar 2004:
        - Remove get_ticks() from NFS code
        - Add verification of RPC transaction ID
      
      * Patch by Pierre Aubert, 02 Mar 2004:
        cleanup for IDE and USB drivers for MPC5200
      c3f9d493
  8. 13 Mar, 2004 1 commit
    • wdenk's avatar
      * Patch by Rune Torgersen, 27 Feb 2004: · c40b2956
      wdenk authored
        - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
        - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
        - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
      
      * Patch by Masami Komiya, 27 Feb 2004:
        Fix rarpboot: add autoload by NFS
      
      * Patch by Dan Eisenhut, 26 Feb 2004:
        fix flash_write return value in saveenv
      
      * Patch by Stephan Linz, 11 Dec 2003
        expand config.mk to avoid trigraph warnings on NIOS
      
      * Rename "BMS2003" board into "HMI10"
      c40b2956
  9. 12 Mar, 2004 1 commit
  10. 02 Mar, 2004 1 commit
  11. 27 Feb, 2004 3 commits
    • wdenk's avatar
      * Patch by Travis Sawyer, 26 Feb 2004: · e7c85689
      wdenk authored
        Fix broken compile for XPEDITE1K target.
      
      * Patch by Stephan Linz, 26 Feb 2004:
        Bug fix for NFS code on NIOS targets
      
      * Patch by Stephen Williams, 26 Feb 2004:
        Break up SystemACE reads of large block counts
      e7c85689
    • wdenk's avatar
      * Patch by Pierre Aubert, 26 Feb 2004 · 132ba5fd
      wdenk authored
        add IDE support for MPC5200
      
      * Patch by Masami Komiya, 26 Feb 2004:
        add autoload via NFS
      
      * Patch by Stephen Williams
        Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
        elsewhere in the source.
      132ba5fd
    • wdenk's avatar
      * Patch by Steven Scholz, 25 Feb 2004: · 11dadd54
      wdenk authored
        - Timeouts in FPGA code should be based on CFG_HZ
        - Minor cleanup in code for Altera FPGA ACEX1K
      
      * Patch by Steven Scholz, 25 Feb 2004:
        Changed "Directory Hierarchy" section in README
      
      * Patch by Masami Komiya, 25 Feb 2004:
        Reduce copy count in nfs_read_reply() of NFS code
      11dadd54
  12. 26 Feb, 2004 1 commit
    • wdenk's avatar
      * Patch by Markus Pietrek, 24 Feb 2004: · 80885a9d
      wdenk authored
        NS9750 DevBoard added
      
      * Patch by Pierre AUBERT, 24 Feb 2004
        add USB support for MPC5200
      
      * Patch by Steven Scholz, 24 Feb 2004:
        - fix MII commands to use values from last command
      
      * Patch by Torsten Demke, 24 Feb 2004:
        Add support for the eXalion platform (SPSW-8240, F-30, F-300)
      80885a9d
  13. 24 Feb, 2004 1 commit
  14. 23 Feb, 2004 4 commits
    • wdenk's avatar
      * Patch by Peter Ryser, 20 Feb 2004: · 028ab6b5
      wdenk authored
        Add support for the Xilinx ML300 platform
      
      * Patch by Stephan Linz, 17 Feb 2004:
        Fix watchdog support for NIOS
      
      * Patch by Josh Fryman, 16 Feb 2004:
        Fix byte-swapping for cfi_flash.c for different bus widths
      
      * Patch by Jon Diekema, 14 Jeb 2004:
        Remove duplicate "FPGA Support" notes from the README file
      028ab6b5
    • wdenk's avatar
      * Patch by Laurent Mohin, 10 Feb 2004: · cd0a9de6
      wdenk authored
        Fix buffer overflow in common/usb.c
      
      * Patch by Tolunay Orkun, 10 Feb 2004:
        Add support for Cogent CSB272 board
      
      * Code cleanup
      cd0a9de6
    • wdenk's avatar
      * Patch by Thomas Elste, 10 Feb 2004: · 2d1a537d
      wdenk authored
        Add support for NET+50 CPU and ModNET50 board
      
      * Patch by Sam Song, 10 Feb 2004:
        Fix typos in cfi_flash.c
      
      * Patch by Leon Kukovec, 10 Feb 2004
        Fixed long dir entry slot id calculation in get_vfatname
      
      * Patch by Robin Gilks, 10 Feb 2004:
        add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
        !=, <>, <, >, <=, >=)
      2d1a537d
    • wdenk's avatar
      * CVS add missing files · 3f85ce27
      wdenk authored
      * Cleanup compiler warnings
      
      * Fix problem with side effects in macros in include/usb.h
      
      * Patch by David Benson, 13 Nov 2003:
        bug 841358 - fix TFTP download size limit
      
      * Fixing bug 850768:
        improper flush_cache() in load_serial()
      
      * Fixing bug 834943:
        MPC8540 - missing volatile declarations
      
      * Patch by Stephen Williams, 09 Feb 2004:
        Add support for Xilinx SystemACE chip:
        - New files common/cmd_ace.c and include/systemace.h
        - Hook systemace support into cmd_fat and the partition manager
      
      * Patch by Travis Sawyer, 09 Feb 2004:
        Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
      3f85ce27
  15. 12 Feb, 2004 1 commit
    • wdenk's avatar
      * Some code cleanup · bf9e3b38
      wdenk authored
      * Patch by Josef Baumgartner, 10 Feb 2004:
        Fixes for Coldfire port
      
      * Patch by Brad Kemp, 11 Feb 2004:
        Fix CFI flash driver problems
      bf9e3b38
  16. 08 Feb, 2004 2 commits
    • wdenk's avatar
      * Patch by Yuli Barcohen, 26 Jan 2004: · 5653fc33
      wdenk authored
        Allow bzip2 compression for small memory footprint boards
      
      * Patch by Brad Kemp, 21 Jan 2004:
        Add support for CFI flash driver for both the Intel and the AMD
        command sets.
      
      * Patch by Travis Sawyer, 20 Jan 2004:
        Fix pci bridge auto enumeration of sibling p2p bridges.
      
      * Patch by Tolunay Orkun, 12 Jan 2004:
        Add some delays as needed for Intel LXT971A PHY support
      
      * Patches by Stephan Linz, 09 Jan 2004:
        - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
        - make DK1C20 board configuration related to ASMI conform to
          documentation
      5653fc33
    • wdenk's avatar
      Patch by Anders Larsen, 09 Jan 2004: · f6e20fc6
      wdenk authored
      ARM memory layout fixes: the abort-stack is now set up in the
      correct RAM area, and the BSS is zeroed out as it should be.
      
      Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
      of the linker scripts are replaced by '__bss_start' and '_end',
      resp., which is a further step to eliminate unnecessary differences
      between the implementation of the CPU architectures.
      f6e20fc6
  17. 06 Feb, 2004 1 commit
  18. 16 Jan, 2004 1 commit
    • wdenk's avatar
      [Strange. I _did_ check these in before. Seems SF restored an old · 1c43771b
      wdenk authored
      version of the repository???]
      
      * Patch by Reinhard Meyer, 09 Jan 2004:
        - add RTC support for MPC5200 based boards (requires RTC_XTAL)
      
      * Add support for IDE LED on BMS2003 board
        (exclusive with status LED!)
      
      * Add support for PS/2 keyboard (used with PS/2 multiplexor on
        BMS2003 board)
      
      * Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
        Add common files for "emk" boards
      1c43771b
  19. 06 Jan, 2004 1 commit
  20. 04 Jan, 2004 2 commits
    • wdenk's avatar
      * Make BMS2003 use a separate config file to avoid #ifdef mess; · a522fa0e
      wdenk authored
        add I2C support; add support for DS1337 RTC
      
      * Add CompactFlash support  for BMS2003 board
      
      * Add support for status LED on BMS2003 board
      a522fa0e
    • wdenk's avatar
      * Fix problems caused by Robert Schwebel's cramfs patch · 180d3f74
      wdenk authored
      * Patch by Scott McNutt, 02 Jan 2004:
        Add support for the Nios Active Serial Memory Interface (ASMI)
        on Cyclone devices
      
      * Patch by Andrea Marson, 16 Dec 2003:
        Add support for the PPChameleon ME and HI modules
      
      * Patch by Yuli Barcohen, 22 Dec 2003:
        Add support for Motorola DUET ADS board (MPC87x/88x)
      180d3f74
  21. 03 Jan, 2004 1 commit
  22. 02 Jan, 2004 1 commit
    • wdenk's avatar
      * Cleanup lowboot code for MPC5200 · d4ca31c4
      wdenk authored
      * Minor code cleanup (coding style)
      
      * Patch by Reinhard Meyer, 30 Dec 2003:
        - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
        - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
        - turned debug print of PHY registers into a function (called in two places)
        - added support for EMK MPC5200 based modules
      
      * Fix MPC8xx PLPRCR_MFD_SHIFT typo
      
      * Add support for TQM866M modules
      
      * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
      
      * Fix a few compiler warnings
      d4ca31c4
  23. 27 Dec, 2003 1 commit
    • wdenk's avatar
      * Make CPU clock on ICA-IP board controllable by a "cpuclk" · 7cb22f97
      wdenk authored
        environment variable which can set to "100", "133", or "150". The
        CPU clock will be configured accordingly upon next reboot. Other
        values are ignored. In case of an invalid or undefined "cpuclk"
        value, the compile-time default CPU clock speed will be used.
      
      * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
        window that is used to access the UART registers by the Linux driver)
      
      * Patch by Reinhard Meyer, 20 Dec 2003:
        Fix clock calculation for the MPC5200 for higher clock frequencies
        (above 2**32 / 10 = 429.5 MHz).
      7cb22f97
  24. 09 Dec, 2003 1 commit