1. 30 Oct, 2013 3 commits
  2. 14 Oct, 2013 2 commits
  3. 28 Aug, 2013 1 commit
  4. 12 Aug, 2013 2 commits
  5. 10 Aug, 2013 6 commits
  6. 09 Aug, 2013 3 commits
    • Marek Vasut's avatar
      video: Implement continuous screen refresh for SmartLCD into mxsfb · 84f957f8
      Marek Vasut authored
      
      
      The LCDIF interface doesn't give us any means to do continuous refresh
      when driving a SmartLCD. To work this around, we produce a special
      circular DMA descriptor, which only writes the HW_LCDIF_CTRL0 register
      and sets the RUN bit.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Anatolij Gustschin <agust@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      84f957f8
    • Marek Vasut's avatar
      video: Add System-Mode configuration hook into mxsfb · 9de4b729
      Marek Vasut authored
      
      
      Add hook that allow configuring SmartLCD attached the MXS LCDIF
      controller operating in System-Mode. This hook can be overriden
      by a platform-specific SmartLCD programming routine, which writes
      the SmartLCD specific values into it's registers.
      
      Also, this patch makes sure the SYNC signals are off for the
      SmartLCD case.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Anatolij Gustschin <agust@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      9de4b729
    • Marek Vasut's avatar
      video: Allocate the MXSFB framebuffer aligned · e57baf5d
      Marek Vasut authored
      
      
      Allocate the framebuffer aligned so it can be flushed
      and the flush_dcache_range() function won't complain.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Anatolij Gustschin <agust@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      Acked-by: default avatarStefano Babic <sbabic@denx.de>
      e57baf5d
  7. 29 Jul, 2013 1 commit
  8. 24 Jul, 2013 1 commit
  9. 08 Jul, 2013 1 commit
  10. 01 Jul, 2013 2 commits
  11. 28 Jun, 2013 1 commit
  12. 21 Jun, 2013 1 commit
  13. 13 Jun, 2013 1 commit
    • Amar's avatar
      SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT · 752f4c4a
      Amar authored
      
      
      This patch enables and initialises DWMMC for SMDK5250.
      Supports both FDT and non-FDT. This patch creates a new file
      'exynos5-dt.c' meant for FDT support.
              exynos5-dt.c:   This file shall contain all code which supports FDT.
                              Any addition of FDT support for any module needs to be
                              added in this file.
              smdk5250.c:     This file shall contain the code which supports non-FDT.
                              version. Any addition of non-FDT support for any module
                              needs to be added in this file.
                              May be, the file smdk5250.c can be removed in near future
                              when non-FDT is not required.
      
      The Makefile is updated to compile only one of the files
      exynos5-dt.c / smdk5250.c based on FDT configuration.
      
      NOTE:
      Please note that all additions corresponding to FDT need to be added into the
      file exynos5-dt.c.
      At same time if non-FDT support is required then add the corresponding
      updations into smdk5250.c.
      Signed-off-by: default avatarAmar <amarendra.xt@samsung.com>
      Signed-off-by: default avatarMinkyu Kang <mk7.kang@samsung.com>
      752f4c4a
  14. 16 May, 2013 1 commit
  15. 06 May, 2013 2 commits
  16. 05 May, 2013 2 commits
  17. 29 Mar, 2013 1 commit
  18. 27 Mar, 2013 6 commits
  19. 21 Mar, 2013 3 commits