1. 03 Nov, 2011 1 commit
  2. 05 Oct, 2011 1 commit
  3. 30 Sep, 2011 1 commit
  4. 03 Sep, 2011 1 commit
  5. 23 May, 2011 4 commits
  6. 28 Apr, 2011 1 commit
    • Grant Likely's avatar
      Add CONFIG_OF_LIBFDT to more boards. · 2fa8ca98
      Grant Likely authored
      The following boards gain device tree support with this patch:
      ca9x4_ct_vxp - Versatile Express
      i.mx5 boards:
      OMAP boards:
      Tegra boards:
      Signed-off-by: default avatarGrant Likely <grant.likely@linaro.org>
  7. 27 Apr, 2011 1 commit
  8. 01 Feb, 2011 3 commits
  9. 21 Nov, 2010 1 commit
  10. 29 Oct, 2010 1 commit
  11. 28 Oct, 2010 2 commits
    • Shawn Guo's avatar
      mx51evk: support new relocation scheme · 1ab027cb
      Shawn Guo authored
      This patch is to fix build breakage and support new relocation
      scheme for mx51evk.
      - Correct IRAM base address and add size definition
        The IRAM starts from 0x1FFE0000 on final revsion i.mx51 than
        0x1FFE8000 which is for older revision.
      - Include imx-regs.h in mx51evk.h
        Definitions like CSD0_BASE_ADDR and IRAM_BASE_ADDR can be
        referred to.
        They are used to define init RAM layout.
      - Remove comment for CONFIG_SYS_GBL_DATA_SIZE which has been
        buried by Wolfgang's commit below
      : Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
      Signed-off-by: default avatarShawn Guo <shawn.gsc@gmail.com>
    • Shawn Guo's avatar
      mx51evk: consolidate env for mmcboot and netboot · 06982534
      Shawn Guo authored
      This patch is to consolidate default mx51evk env for two primary
      boot modes, mmcboot and netboot.
      It also cleans some unused env like netdev, uboot and redundant
      env like loadaddr since CONFIG_LOADADDR already defines it.
      Signed-off-by: default avatarShawn Guo <shawn.gsc@gmail.com>
  12. 26 Oct, 2010 1 commit
    • Wolfgang Denk's avatar
      Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value · 25ddd1fb
      Wolfgang Denk authored
      CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
      being able to use "sizeof(struct global_data)" in assembler files.
      Recent experience has shown that manual synchronization is not
      reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
      GENERATED_GBL_DATA_SIZE which gets automatically generated by the
      asm-offsets tool.  In the result, all definitions of this value can be
      deleted from the board config files.  We have to make sure that all
      files that reference such data include the new <asm-offsets.h> file.
      No other changes have been done yet, but it is obvious that similar
      changes / simplifications can be done for other, related macro
      definitions as well.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Acked-by: default avatarKumar Gala <galak@kernel.crashing.org>
  13. 18 Oct, 2010 1 commit
  14. 30 Sep, 2010 1 commit
    • Stefano Babic's avatar
      MXC: Correct SPI_CPOL setting in SPI driver · 9f481e95
      Stefano Babic authored
      The handling of the SPI_CPOL bit inside the SPI
      driver was wrong. As reported by the manual,
      the meaning of the SSPOL inside the
      configuration register is the same as reported
      by SPI specification (0 if low in idle, 1 is high
      on idle). The driver inverts this logic.
      Because this patch sets the logic as specified, it is required
      to clear the CPOL bit in the configuration file to adapt
      to the correct logic.
      Signed-off-by: default avatarStefano Babic <sbabic@denx.de>
      Signed-off-by: default avatarDavid Jander <david.jander@protonic.nl>
  15. 10 May, 2010 1 commit
  16. 05 May, 2010 1 commit
  17. 30 Apr, 2010 1 commit
  18. 18 Apr, 2010 1 commit
  19. 07 Mar, 2010 1 commit