Use right addresses for channel names

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Mainline kernel has no r1p12 compatible string that's why console stops
to work with the latest DTS files. Append generic compatible string.
Keep in your mind that using this generic compatible string not all uart
features will be available.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Modifying device tree node to support legacy interrupts.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

GPIO driver supports an input interrupt that's why gpio node itself can
be labeled as interrupt controller.

Reported-by: John Linn <linnj@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch adds ddrc memory controller node in dts.
size mentioned in dts is 0x30000, because we need to access DDR_QOS
INTR registers located at fd090208 from this driver.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ZynqMP DMA's main clock and apb clock are added
in zynqmp DT.

Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>

Add CCI-400 node to DTSI.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ZynqMP is not using global interrupt-parent setting that's why
it has to be listed in every node separately. PMU node missed it and
this patch is adding it.

Reported-by: John Linn <John.Linn@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add power-domains to the DT and attach devices to them.
The power-domains are all logical domains as understood by firmware.
Each PD is identified by a unique identifier that the platform firmware
understands.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch adds broken-tuning property to SD and
eMMC nodes.

Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Remove jumbo properties which are handled in the driver directly
and use mainline compatible string which is already handled by the
driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch add 8-bit bus width property to eMMC node.

Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch makes compatible string as "m25p80" for qspi node in
ep108 device tree file

Signed-off-by: Ranjit Waghmode <ranjit.waghmode@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add missing mmc aliases.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Change the dtsi include code to use the C pre-processor #include instead
of the device tree /include/. This brings all ZynqMP device trees inline
with each other.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Move kernel and fdt offsets and sizes to board config file
as the flash size varies across boards

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Setup reset off for lthor.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This is example how to change u-boot to support more memory banks read
from DT.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Remove hardcoded memory sizes. Use information from DT memory node.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Compatible property should be the first.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add missing DT nodes and enable USB.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>

Add missing qspi node and make qspi as spi0.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Sync with others zynq DTS files.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Keep nodes alphabelitally sorted.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>

Add missing adv7511 and configure to match Base TRD.

Signed-off-by: Christian Kohn <christian.kohn@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add bindings for adv7511.

Signed-off-by: Christian Kohn <christian.kohn@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Added phy reset gpio information for gem0.

Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

- Sync with Linux kernel
- Remove rootfs
- Remove earlyprintk

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

- Have compatible string as the first property
- Sync with Linux kernel dtsi
- Add missing interrupt properties

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Added addtional bindings required for FPGA Manager operation
of the Xilinx Zynq Devc configuration interface.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

GPIO driver supports an input interrupt that's why gpio node itself can
be labeled as interrupt controller.

Reported-by: John Linn <linnj@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

remove logging of the 'skipped' blocks

Signed-off-by: Steve Rae <srae@broadcom.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

When 7bfc3b13 (sparse: Refactor chunk parsing function) was implemented,
it dropped 99819458

 (aboot: fix block addressing for don't care chunk type).

This re-implements the required fix for the "don't care chunk type"...

Signed-off-by: Steve Rae <srae@broadcom.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

If CONFIG_SPL_OS_BOOT is enabled and Linux image is not flashed at
RAW_MODE_KERNEL_SECTOR in MMC, spl still assumes that Linux is
available and tries to boot it and hangs. In order to avoid this,
adding a check to verify if parsed image header is of type IH_OS_LINUX.
If it fails then fall back to load u-boot image.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>