1. 26 Jan, 2010 1 commit
  2. 17 Jan, 2010 1 commit
    • Heiko Schocher's avatar
      cmd_eeprom: I2C updates · 548738b4
      Heiko Schocher authored
      
      
      - CONFIG_ENV_EEPROM_IS_ON_I2C
        define this, if you have I2C and SPI activated, and your
        EEPROM, which holds the environment, is on the I2C bus.
      
      - CONFIG_I2C_ENV_EEPROM_BUS
        if you have an Environment on an EEPROM reached over
        I2C muxes, you can now define, how to reach this
        EEPROM.
      Signed-off-by: default avatarHeiko Schocher <hs@denx.de>
      548738b4
  3. 08 Dec, 2009 1 commit
  4. 07 Dec, 2009 1 commit
  5. 05 Dec, 2009 1 commit
  6. 02 Dec, 2009 1 commit
  7. 27 Oct, 2009 2 commits
  8. 18 Oct, 2009 1 commit
    • Mike Frysinger's avatar
      env: only build env_embedded and envcrc when needed · 6dab6add
      Mike Frysinger authored
      
      
      The env code is protected by the ENV_IS_EMBEDDED define, so attempting to
      compile the code when this isn't defined is pointless.  Now that the env
      headers have unified around CONFIG_ENV_IS_EMBEDDED, convert the build
      system to only build the env objects when this is enabled.  And now that
      the env code is conditionally compiled, we can drop the source code checks.
      
      For people who want to extract the environment manually, add a new option
      CONFIG_BUILD_ENVCRC that only enables the envcrc utility.
      Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
      6dab6add
  9. 24 Sep, 2009 1 commit
  10. 22 Sep, 2009 2 commits
  11. 06 Sep, 2009 1 commit
    • Eric Millbrandt's avatar
      Reset i2c slave devices during init on mpc5xxx cpus · 5da71efa
      Eric Millbrandt authored
      
      
      Reset any i2c devices that may have been interrupted during a system reset.
      Normally this would be accomplished by clocking the line until SCL and SDA
      are released and then sending a start condtiion (From an Atmel datasheet).
      There is no direct access to the i2c pins so instead create start commands
      through the i2c interface.  Send a start command then delay for the SDA Hold
      time, repeat this by disabling/enabling the bus a total of 9 times.
      Signed-off-by: default avatarEric Millbrandt <emillbrandt@dekaresearch.com>
      5da71efa
  12. 02 Sep, 2009 1 commit
  13. 25 Aug, 2009 2 commits
  14. 23 Jul, 2009 1 commit
  15. 17 Jul, 2009 2 commits
  16. 16 Jul, 2009 1 commit
  17. 07 Jul, 2009 1 commit
  18. 21 Jun, 2009 1 commit
  19. 12 Jun, 2009 3 commits
  20. 03 Apr, 2009 2 commits
    • Peter Tyser's avatar
      Add support for building native win32 tools · 2f8d396b
      Peter Tyser authored
      
      
      Add support for compiling the host tools in the tools directory using
      the MinGW toolchain.  This produces executables which can be used on
      standard Windows computers without requiring cygwin.
      
      One must specify the MinGW compiler and strip utilities as if they
      were the host toolchain in order to build win32 executables, eg:
      
      make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      2f8d396b
    • Wolfgang Denk's avatar
      Add "source" command; prepare removal of "autoscr" command · 74de7aef
      Wolfgang Denk authored
      
      
      According to the doc/feature-removal-schedule.txt, the "autoscr"
      command will be replaced by the "source" command in approximately 6
      months from now.
      
      This patch prepares this change and starts a 6 month transition
      period as follows:
      
      - The new "source" command has been added, which implements exactly
        the same functionlaity as the old "autoscr" command before
      - The old "autoscr" command name is kept as an alias for compatibility
      - Command sequences, script files atc. have been adapted to use the
        new "source" command
      - Related environment variables ("autoscript", "autoscript_uname")
        have *not* been adapted yet; these will be renamed resp. removed in
        a separate patch when the support for the "autoscr" command get's
        finally dropped.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      74de7aef
  21. 20 Mar, 2009 1 commit
  22. 18 Mar, 2009 1 commit
  23. 19 Feb, 2009 1 commit
  24. 18 Feb, 2009 1 commit
    • Ron Madrid's avatar
      Create configuration option for restricted ns16550 functions · f5675aa5
      Ron Madrid authored
      
      
      This patch will create a configuration option for a minimum configuration for
      the ns16550 serial driver at drivers/serial/ns16550.c and will apply this new
      configuration option to the SIMPC8313.h config file in order to fix the NAND
      bootstrap build error.  This option will exclude all functions with exception of
      NS16550_putc and NS16550_init.  This will be used primarily to save space and
      remove unused code from builds in which space is limited.
      Signed-off-by: default avatarRon Madrid <ron_madrid@sbcglobal.net>
      f5675aa5
  25. 17 Feb, 2009 1 commit
  26. 12 Feb, 2009 1 commit
  27. 11 Feb, 2009 1 commit
    • Heiko Schocher's avatar
      8xx serial, smc: add configurable SMC Rx buffer len · 2b3f12c2
      Heiko Schocher authored
      
      
      This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
      With this option it is possible to allow the receive
      buffer for the SMC on 8xx to be greater then 1. In case
      CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
      old version.
      
      When defining CONFIG_SYS_SMC_RXBUFLEN also
      CONFIG_SYS_MAXIDLE must be defined to setup the maximum
      idle timeout for the SMC.
      Signed-off-by: default avatarHeiko Schocher <hs@denx.de>
      2b3f12c2
  28. 09 Feb, 2009 1 commit
    • Heiko Schocher's avatar
      82xx serial, smc: add configurable SMC Rx buffer len · c92fac91
      Heiko Schocher authored
      
      
      This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
      With this option it is possible to allow the receive
      buffer for the SMC on 82xx to be greater then 1. In case
      CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
      old version.
      
      When defining CONFIG_SYS_SMC_RXBUFLEN also
      CONFIG_SYS_MAXIDLE must be defined to setup the maximum
      idle timeout for the SMC.
      Signed-off-by: default avatarHeiko Schocher <hs@denx.de>
      c92fac91
  29. 31 Jan, 2009 1 commit
  30. 28 Jan, 2009 1 commit
    • Peter Tyser's avatar
      Command usage cleanup · 2fb2604d
      Peter Tyser authored
      
      
      Remove command name from all command "usage" fields and update
      common/command.c to display "name - usage" instead of
      just "usage". Also remove newlines from command usage fields.
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      2fb2604d
  31. 27 Jan, 2009 1 commit
  32. 24 Jan, 2009 1 commit
    • Peter Tyser's avatar
      Add support for Maxim's DS4510 I2C device · a7c93104
      Peter Tyser authored
      
      
      Initial support for the DS4510, a CPU supervisor with
      integrated EEPROM, SRAM, and 4 programmable non-volatile
      GPIO pins. The CONFIG_DS4510 define enables support
      for the device while the CONFIG_CMD_DS4510 define
      enables the ds4510 command. The additional
      CONFIG_DS4510_INFO, CONFIG_DS4510_MEM, and
      CONFIG_DS4510_RST defines add additional sub-commands
      to the ds4510 command when defined.
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      a7c93104
  33. 30 Dec, 2008 1 commit