1. 25 Jun, 2015 2 commits
  2. 08 Jun, 2015 2 commits
  3. 01 Jun, 2015 2 commits
  4. 15 May, 2015 2 commits
    • Przemyslaw Marczak's avatar
      dm: regulator: add regulator command · 6262b72b
      Przemyslaw Marczak authored
      This command is based on driver model regulator's API.
      The user interface provides:
      - list UCLASS regulator devices
      - show or [set] operating regulator device
      - print constraints info
      - print operating status
      - print/[set] voltage value [uV] (force)
      - print/[set] current value [uA]
      - print/[set] operating mode id
      - enable the regulator output
      - disable the regulator output
      
      The 'force' option can be used for setting the value which exceeds
      the constraints min/max limits.
      Signed-off-by: default avatarPrzemyslaw Marczak <p.marczak@samsung.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      6262b72b
    • Przemyslaw Marczak's avatar
      dm: pmic: add pmic command · d89fdcf9
      Przemyslaw Marczak authored
      This is new command for the PMIC devices based on driver model PMIC API.
      Command features are unchanged:
      - list UCLASS pmic devices
      - show or [set] operating pmic device (NEW)
      - dump registers
      - read byte of register at address
      - write byte to register at address
      
      The only one change for this command is 'dev' subcommand.
      Signed-off-by: default avatarPrzemyslaw Marczak <p.marczak@samsung.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      d89fdcf9
  5. 30 Apr, 2015 1 commit
  6. 21 Apr, 2015 1 commit
  7. 18 Apr, 2015 2 commits
  8. 10 Apr, 2015 1 commit
    • Linus Walleij's avatar
      common/armflash: Support for ARM flash images · 4bb66506
      Linus Walleij authored
      The ARM reference designs all use a special flash image format
      that stores a footer (two versions exist) at the end of the last
      erase block of the image in flash memory.
      
      Version one of the footer is indicated by the magic number
      0xA0FFFF9F at 12 bytes before the end of the flash block and
      version two is indicated by the magic number 0x464F4F54 0x464C5348
      (ASCII for "FLSHFOOT") in the very last 8 bytes of the erase block.
      
      This command driver implements support for both versions of the
      AFS images (the name comes from the Linux driver in drivers/mtd/afs.c)
      and makes it possible to list images and load an image by name into
      the memory with these commands:
      
      afs - lists flash contents
      afs load <image> - loads image to address indicated in the image
      afs load <image> <addres> - loads image to a specified address
      
      This image scheme is used on the ARM Integrator family, ARM
      Versatile family, ARM RealView family (not yet supported in U-Boot)
      and ARM Versatile Express family up to and including the new
      Juno board for 64 bit development.
      Reviewed-by: default avatarTom Rini <trini@konsulko.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      4bb66506
  9. 05 Mar, 2015 1 commit
  10. 24 Feb, 2015 1 commit
  11. 12 Feb, 2015 1 commit
  12. 23 Nov, 2014 2 commits
    • Masahiro Yamada's avatar
      commands: add more command entries in Kconfig · 60296a83
      Masahiro Yamada authored
      This commit adds some of command entries (CONFIG_CMD_*) to
      cover include/config_cmd_default.h and a little extra.
      
      Because U-Boot supports lots of commands, they should be categorized
      according to their usage.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      60296a83
    • Masahiro Yamada's avatar
      hush: add CONFIG_HUSH_PARSER to Kconfig · 6c775090
      Masahiro Yamada authored
      The README file states that the macros beginning with "CONFIG_SYS_"
      depend on the hardware etc. and should not be meddled with if you do
      not what you're doing.
      We have already screwed up with this policy; we have given the prefix
      "CONFIG_SYS_" to many user-selectable configurations.
      Here, "CONFIG_SYS_HUSH_PARSER" is one of them.  Users can enable it
      if they want to use a more powerful command line parser, or disable it
      if they only need a simple one.
      
      This commit attempts to rename CONFIG_SYS_HUSH_PARSER to
      CONFIG_HUSH_PARSER and move it to Kconfig.
      
      Every board maintainer is expected to enable CONFIG_HUSH_PARSER
      (= add "CONFIG_HUSH_PARSER=y" to his defconfig file) and remove
      "#define CONFIG_SYS_HUSH_PARSER" from his header file.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      6c775090
  13. 24 Sep, 2014 6 commits