1. 18 May, 2018 1 commit
  2. 02 Nov, 2017 2 commits
    • zhang sanshan's avatar
      MA-9409-3 Add base board support for android and android things. · f791112b
      zhang sanshan authored
      * add board support for android and android things.
        mx6ul_nxpu_iopb, pico-6ul, pico-imx7d, aquila-6ul
        reorganize the Kconfig, and fix the redefine issue.
      * add android configure into configure-while
      * add a common file mx_android_common.h
        it will be included by android and android things.
        defconfig only include ANDROID_THINGS_SUPPORT or ANDROID_SUPPORT
      * move partition_table_valid into f_fastboot.c.
        it's a common code.
      * add invalidate_dcache_range in fixed order.
        It will have salt invalid issue if we do not add it in order
      * add display for pico-7d.
      Change-Id: I6f8a4876c2f8bbd098034d1e3f53033109300bca
      Signed-off-by: default avatarzhang sanshan <sanshan.zhang@nxp.com>
    • Zhang Bo's avatar
      MA-9786[Android] change bootdelay time to zero to optimize boot time · 2a52ace5
      Zhang Bo authored
      Change the CONFIG_BOOTDELAY macro to 0 in defconfig to autoboot without delay.
      Change-Id: Ie4f49325b0bac73eed6aafe59bf6a5ec584a4d43
      Signed-off-by: default avatarZhang Bo <bo.zhang@nxp.com>
  3. 05 Apr, 2017 8 commits
  4. 24 Jan, 2017 1 commit
  5. 21 Jan, 2017 1 commit
  6. 23 Oct, 2016 2 commits
  7. 27 Sep, 2016 1 commit
    • Tom Rini's avatar
      dfu: Migrate to Kconfig · 6828e602
      Tom Rini authored
      Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for
      CMD_DFU (as we must have the DFU command enabled to do anything DFU).
      Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add
      options for all of the back end choices that DFU can make use of.
      Cc: Lukasz Majewski <l.majewski@samsung.com>
      Signed-off-by: default avatarTom Rini <trini@konsulko.com>
      Acked-by: default avatarLukasz Majewski <l.majewski@samsung.com>
  8. 09 Sep, 2016 1 commit
  9. 19 Jul, 2016 3 commits
  10. 17 Jun, 2016 1 commit
  11. 25 Apr, 2016 3 commits
  12. 20 Apr, 2016 3 commits
  13. 26 Mar, 2016 1 commit
  14. 25 Mar, 2016 1 commit
  15. 14 Mar, 2016 1 commit
  16. 21 Feb, 2016 1 commit
    • Peng Fan's avatar
      imx: mx7d: isolate resources to domain 0 for A7 core · 35c4ce5e
      Peng Fan authored
      In current design, if any peripheral was assigned to both A7 and M4,
      it will receive ipg_stop or ipg_wait when any of the 2 platforms
      enter low power mode. We will have a risk that, if A7 enter wait,
      M4 enter stop, peripheral will have chance to get ipg_stop and ipg_wait
      asserted same time. Also if M4 enters stop mode, A7 will have no
      chance to access the peripheral.
      There are 26 peripherals affected by this IC issue:
      Software Workaround:
      The solution is to set the peripherals to Domain0 by A core, since A core
      in Domain0. The peripherals which will be used by M4, will be set to Domain1
      by M4.
      For example, A core set WDOG4 to domain0, but when M4 boots up, M4 will
      set WDOG4 to domain1, because M4 will use WDOG4.
      So the peripherals are not shared by them. This way requires
      the uboot implemented the RDC driver and set the 26 IPs above
      to domain 0 only. M4 image will set the M4 to domain 1 and
      set peripheral which it will use to domain 1.
      This patch enables the CONFIG_IMX_RDC and CONFIG_IMX_BOOTAUX for
      i.MX7D SABRESD board, and setup the 26 IP resources to domain 0.
      Signed-off-by: default avatarYe.Li <ye.li@nxp.com>
      Signed-off-by: default avatarPeng Fan <peng.fan@nxp.com>
  17. 18 Nov, 2015 1 commit
  18. 28 Sep, 2015 1 commit
  19. 13 Sep, 2015 1 commit