1. 03 Sep, 2008 1 commit
  2. 10 Jun, 2008 1 commit
  3. 05 Jun, 2008 1 commit
  4. 25 Nov, 2007 1 commit
  5. 09 Jul, 2007 1 commit
  6. 03 Jul, 2007 1 commit
  7. 09 Jun, 2004 1 commit
  8. 11 Mar, 2004 1 commit
  9. 02 Mar, 2004 1 commit
  10. 26 Feb, 2004 1 commit
    • wdenk's avatar
      * Patch by Rahul Shanbhag, 19 Feb 2004: · 0c852a28
      wdenk authored
        Fixes for for OMAP1610 board:
        - shift some IRQ specific code to platform.S file
        - remove duplicatewatchdog reset code from start.S
      
      * Make Auto-MDIX Support configurable on INCA-IP board
      
      * Fix license for mkimage tool
      0c852a28
  11. 22 Feb, 2004 1 commit
    • wdenk's avatar
      * Patch by Travis Sawyer, 09 Feb 2004: · 3c74e32a
      wdenk authored
        o 440GX:
          - Fix PCI Indirect access for type 1 config cycles with ppc440.
          - Add phymode for 440 enet
          - fix pci pre init
        o XPedite1K:
          - Change board_pre_init to board_early_init_f
          - Add user flash to bus controller setup
          - Fix pci pre init
          - Fix is_pci_host to check GPIO for monarch bit
          - Force xpedite1k to pci conventional mode (via #define option)
      
      * Patch by Brad Kemp, 4 Feb 2004:
        - handle the machine check that is generated during the PCI scans
          on 82xx processors.
        - define the registers used in the IMMR by the PCI subsystem.
      
      * Patch by Pierre Aubert, 03 Feb 2004:
        cpu/mpc5xxx/start.S: copy MBAR into SPR311
      
      * Patch by Jeff Angielski, 03 Feb 2004:
        Fix copy & paste error in cpu/mpc8260/pci.c
      
      * Patch by Reinhard Meyer, 24 Jan 2004:
        Fix typo in cpu/mpc5xxx/pci_mpc5200.c
      3c74e32a
  12. 20 Feb, 2004 1 commit
  13. 17 Aug, 2003 1 commit
    • wdenk's avatar
      * Make Ethernet autonegotiation on INCA-IP work for all clock rates; · e0ac62d7
      wdenk authored
        allow selection of clock frequency as "make" target
      
      * Implement memory autosizing code for IceCube boards
      
      * Configure network port on INCA-IP for autonegotiation
      
      * Fix overflow problem in network timeout code
      
      * Patch by Richard Woodruff, 8 Aug 2003:
        Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
      e0ac62d7
  14. 27 Jun, 2003 1 commit
    • wdenk's avatar
      * Code cleanup: · 8bde7f77
      wdenk authored
        - remove trailing white space, trailing empty lines, C++ comments, etc.
        - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
      
      * Patches by Kenneth Johansson, 25 Jun 2003:
        - major rework of command structure
          (work done mostly by Michal Cendrowski and Joakim Kristiansen)
      8bde7f77
  15. 26 Mar, 2003 1 commit
  16. 06 Mar, 2003 1 commit
    • wdenk's avatar
      * Patches by David Mller, 31 Jan 2003: · 1cb8e980
      wdenk authored
        - minimal setup for CardBus bridges
        - add EEPROM read/write support in the CS8900 driver
        - add support for the builtin I2C controller in the Samsung s3c24x0 chips
        - add support for  MPL's VCMA9 (Samsung s3c2410 based) board
      
      * Patch by Steven Scholz, 04 Feb 2003:
        add support for RTC DS1307
      
      * Patch by Reinhard Meyer, 5 Feb 2003:
        fix PLPRCR/SCCR init sequence on 8xx to allow for
        changes of EBDF by software
      
      * Patch by Vladimir Gurevich, 07 Feb 2003:
        "API-compatibility patch" for 4xx I2C driver
      1cb8e980
  17. 27 Mar, 2002 1 commit