1. 21 Jul, 2006 4 commits
  2. 19 Jul, 2006 8 commits
    • Wolfgang Denk's avatar
      Add support for high-boot on TQM5200 and TQM5200S boards. · 978b1096
      Wolfgang Denk authored
      Hint: the CPLD on the TQM5200 must be programmed with a software
      version supporting the high boot option! The new TQM5200S is
      already supporting this option. On the TQM5200 this option will be
      supported in configurations with MPC5200 rev B processors.
      To actually "high boot", set jumper X30 on the STK52xx.
      Patch by Martin Krause, 12 Jul 2006
    • Wolfgang Denk's avatar
      Add support for new TQM5200 revisions · 45a212c4
      Wolfgang Denk authored
      - Support for TQM5200S (short version without graphic controller)
      - Support for modules with 'N' type S29GL128N Spansion flashes
        (requires changes to flash layout)
      - Support for MPC5200B cpu (mostly support for second SDRAM bank)
    • Wolfgang Denk's avatar
      Fix support for PS/2 keyboard on TQM85xx boards · bd3143f0
      Wolfgang Denk authored
      The PS/2 keyobard driver for the TQM85xx modules only supports the
      internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
      include a DUART, the TQM8560 modules can't be used with the PS/2
      keyboard controller on the STK85xx board.
      The PS/2 keyboard driver should work with the modules TQM8540,
      TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
      Make sure the PS/2 controller on the STK85xx is programmed. Jumper
      settings: X66 1-2, 9-10; X61 2-3
      Patch by Martin Krause, 21 Jun 2006
    • Wolfgang Denk's avatar
      Adjust filenames for USB update images on TRAB board. · c786f427
      Wolfgang Denk authored
      During an automatic update via USB stick, U-Boot searches for
      images with the name "firmware.img" and "kernel.img". This names
      are now changed to "firmw_01.img" and "kernl_01.img". This is done,
      to prevent updates of new boards (with the new macronics "c" step
      flashes) with old, incompatible firmware or kernel versions.
      Patch by Martin Krause, 21 Jun 2006
    • Wolfgang Denk's avatar
      Bugfix in VFD routine on TRAB board. · d053ce62
      Wolfgang Denk authored
      Make sure upper lext pixel can be set to blue, too
      (so far only red was possible).
      Patch by Martin Krause, 15 Feb 2006
    • Wolfgang Denk's avatar
      Fix some bugs in TRAB board flash driver. · 5a3dfef7
      Wolfgang Denk authored
      - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
      - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
      - remove "Unlock Bypass" mode, because macronix flashes do not support
        this mode officially
      - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
        for Intel compatible flashes, not for AMD compatible.
      Patch by Martin Krause, 15 Feb 2006
    • Wolfgang Denk's avatar
      Add additional error messages to flash driver on TRAB board · 0de7fa59
      Wolfgang Denk authored
      (for erase errors and timeout errors)
      Patch by Martin Krause, 14 Feb 2006
    • Wolfgang Denk's avatar
      Add support for TB5200 board · b87dfd28
      Wolfgang Denk authored
      The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
      integrated in a little aluminium case.
      Patch by Martin Krause, 8 Jun 2006
      Some code cleanup
  3. 12 Jul, 2006 2 commits
  4. 10 Jul, 2006 2 commits
  5. 03 Jul, 2006 2 commits
  6. 30 Jun, 2006 1 commit
  7. 26 Jun, 2006 1 commit
  8. 19 Jun, 2006 1 commit
  9. 16 Jun, 2006 9 commits
  10. 14 Jun, 2006 1 commit
  11. 10 Jun, 2006 1 commit
  12. 09 Jun, 2006 1 commit
  13. 08 Jun, 2006 2 commits
  14. 06 Jun, 2006 1 commit
  15. 02 Jun, 2006 2 commits
  16. 30 May, 2006 2 commits