1. 27 Jun, 2003 1 commit
    • wdenk's avatar
      * Code cleanup: · 8bde7f77
      wdenk authored
        - remove trailing white space, trailing empty lines, C++ comments, etc.
        - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
      
      * Patches by Kenneth Johansson, 25 Jun 2003:
        - major rework of command structure
          (work done mostly by Michal Cendrowski and Joakim Kristiansen)
      8bde7f77
  2. 21 Jun, 2003 1 commit
  3. 19 Jun, 2003 2 commits
    • wdenk's avatar
      Patches by Murray Jensen, 17 Jun 2003: · 6dd652fa
      wdenk authored
      - Hymod board database mods: add "who" field and new xilinx chip types
      - provide new "init_cmd_timeout()" function so code external to
        "common/main.c" can use the "reset_cmd_timeout()" function before
        entering the main loop
      - add DTT support for adm1021 (new file dtt/adm1021.c; config
        slightly different. see include/configs/hymod.h for an example
        (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
        CFG_DTT_ADM1021 defined)
      - add new "eeprom_probe()" function which has similar args and
        behaves in a similar way to "eeprom_read()" etc.
      - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
        function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
      - gdbtools copyright update
      - ensure that set_msr() executes the "sync" and "isync" instructions
        after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
      - 8260 I/O ports fix: Open Drain should be set last when configuring
      - add SIU IRQ defines for 8260
      - allow LDSCRIPT override and OBJCFLAGS initialization: change to
        config.mk to allow board configurations to override the GNU
        linker script, selected via the LDSCRIPT, make variable, and to
        give an initial value to the OBJCFLAGS make variable
      - 8260 i2c enhancement:
        o correctly extends the timeout depending on the size of all
          queued messages for both transmit and receive
        o will not continue with receive if transmit times out
        o ensures that the error callback is done for all queued tx
          and rx messages
        o correctly detects both tx and rx timeouts, only delivers one to
          the callback, and does not overwrite an earlier error
        o logic in i2c_probe now correct
      - add "vprintf()" function so that "panic()" function can be
        technically correct
      - many Hymod board changes
      6dd652fa
    • wdenk's avatar
      * Patches by David Mller, 12 Jun 2003: · 48b42616
      wdenk authored
        - rewrite of the S3C24X0 register definitions stuff
        - "driver" for the built-in S3C24X0 RTC
      
      * Patches by Yuli Barcohen, 12 Jun 2003:
        - Add MII support and Ethernet PHY initialization for MPC8260ADS board
        - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
          configuration word supplied by FPGA on some MPC8260ADS boards
      
      * Patch by Pantelis Antoniou, 10 Jun 2003:
        Unify status LED interface
      48b42616
  4. 18 Jun, 2003 1 commit
  5. 03 Jun, 2003 1 commit
    • wdenk's avatar
      * Patches by Udi Finkelstein, 2 June 2003: · 682011ff
      wdenk authored
        - Added support for custom keyboards, initialized by defining a
          board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
        - Added support for the RBC823 board.
        - cpu/mpc8xx/lcd.c now automatically calculates the
          Horizontal Pixel Count field.
      
      * Fix alignment problem in BOOTP (dhcp_leasetime option)
        [pointed out by Nicolas Lacressonnire, 2 Jun 2003]
      
      * Patch by Mark Rakes, 14 May 2003:
        add support for Intel e1000 gig cards.
      
      * Patch by Nye Liu, 3 Jun 2003:
        fix critical typo in MAMR definition (include/mpc8xx.h)
      
      * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
      
      * Patch by Klaus Heydeck, 2 Jun 2003
        Minor changes for KUP4K configuration
      682011ff
  6. 31 May, 2003 1 commit
    • wdenk's avatar
      * Patch by Marc Singer, 29 May 2003: · 7a8e9bed
      wdenk authored
        Fixed rarp boot method for IA32 and other little-endian CPUs.
      
      * Patch by Marc Singer, 28 May 2003:
        Added port I/O commands.
      
      * Patch by Matthew McClintock, 28 May 2003
        - cpu/mpc824x/start.S: fix relocation code when booting from RAM
        - minor patches for utx8245
      
      * Patch by Daniel Engström, 28 May 2003:
        x86 update
      
      * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
        add nand flash support to SXNI855T configuration
        fix/extend nand flash support:
        - fix 'nand erase' command so does not erase bad blocks
        - fix 'nand write' command so does not write to bad blocks
        - fix nand_probe() so handles no flash detected properly
        - add doc/README.nand
        - add .jffs2 and .oob options to nand read/write
        - add 'nand bad' command to list bad blocks
        - add 'clean' option to 'nand erase' to write JFFS2 clean markers
        - make NAND read/write faster
      
      * Patch by Rune Torgersen, 23 May 2003:
        Update for MPC8266ADS board
      7a8e9bed
  7. 30 May, 2003 1 commit
  8. 22 May, 2003 1 commit
    • wdenk's avatar
      * Patch by Dave Ellis, 22 May 2003: · 5d232d0e
      wdenk authored
        Fix problem with only partially cleared .bss segment
      
      * Patch by Rune Torgersen, 12 May 2003:
        get PCI to work on a MPC8266ADS board; incorporate change to
        cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
      5d232d0e
  9. 18 May, 2003 1 commit
  10. 03 May, 2003 1 commit
    • wdenk's avatar
      * Add support for Promess ATC board · 7aa78614
      wdenk authored
      * Patch by Keith Outwater, 28 Apr 2003:
        - Miscellaneous corrections and additions to GEN860T board specific code.
        - Added GEN860_SC variant to GEN860T.
        - Miscellaneous corrections to GEN860T documentation.
        - Correct duplicate entry in U-Boot CREDITS file.
        - Add GEN860T_SC entry in MAINTAINERS file.
        - Update CREDITS file with GEN860T_SC info.
      
      * Update Smiths Aerospace addresses in MAINTAINERS file
      
      * Fix error handling in hush's version of "run" command
      7aa78614
  11. 27 Apr, 2003 1 commit
    • wdenk's avatar
      * LWMON extensions: · 4532cb69
      wdenk authored
        - Splashscreen support
        - modem support
        - sysmon support
        - temperature dependend enabling of LCD
      
      * Allow booting from old "PPCBoot" disk partitions
      
      * Add support for TQM8255 Board / MPC8255 CPU
      4532cb69
  12. 25 Mar, 2003 1 commit
  13. 06 Mar, 2003 1 commit
    • wdenk's avatar
      * Patches by Robert Schwebel, 06 Mar 2003: · 47cd00fa
      wdenk authored
        - fix bug in BOOTP code (must use NetCopyIP)
        - update of CSB226 port
        - clear BSS segment on XScale
        - added support for i2c_init_board() function
        - update to the Innokom plattform
      
      * Extend support for redundand environments for configurations where
        environment size < sector size
      47cd00fa
  14. 17 Jan, 2003 1 commit
    • wdenk's avatar
      * Add dual ethernet support on PM826 · aacf9a49
      wdenk authored
      * Add support for LXT971 PHY on PM826
      
      * Patch by Tord Andersson, 16 Jan 2003:
        Fix flash sector count for TQM8xxL
      
      * Fix I2C EEPROM problem on ICU862 board (would only write the first
        16 bytes out of each 32 byte block)
      aacf9a49
  15. 07 Dec, 2002 1 commit
    • wdenk's avatar
      * Patch by Hans-Joerg Frieden, 06 Dec 2002 · 7c7a23bd
      wdenk authored
        Fix misc problems with AmigaOne support
      
      * Patch by Chris Hallinan, 3 Dec 2002:
        minor cleanup to the MPC8245 EPIC driver
      
      * Patch by Pierre Aubert , 28 Nov 2002
        Add support for external (SIU) interrupts on MPC8xx
      
      * Patch by Pierre Aubert , 28 Nov 2002
        Fix nested syscalls bug in standalone applications
      
      * Patch by David Mller, 27 Nov 2002:
        fix output of "pciinfo" command for CardBus bridge devices.
      
      * Fix bug in TQM8260 board detection - boards got stuck when board ID
        was not readable
      7c7a23bd
  16. 11 Nov, 2002 1 commit
    • wdenk's avatar
      * Patch by Jim Sandoz, 07 Nov 2002: · 1d0350ed
      wdenk authored
        Increase number of network RX buffers (PKTBUFSRX in
        "include/net.h") for EEPRO100 based boards (especially SP8240)
        which showed "Receiver is not ready" errors when U-Boot was
        processing the receive buffers slower than the network controller
        was filling them.
      
      * Get rid of obsolete include/mpc74xx.h
      1d0350ed
  17. 03 Nov, 2002 3 commits
  18. 07 Oct, 2002 2 commits
  19. 01 Oct, 2002 1 commit
  20. 31 Aug, 2002 1 commit
  21. 27 Aug, 2002 2 commits
  22. 17 Aug, 2002 1 commit
  23. 20 Jul, 2002 1 commit
  24. 28 Apr, 2001 1 commit