1. 03 Sep, 2008 1 commit
  2. 27 Aug, 2008 1 commit
  3. 12 Jun, 2008 1 commit
    • Becky Bruce's avatar
      Change initdram() return type to phys_size_t · 9973e3c6
      Becky Bruce authored
      This patch changes the return type of initdram() from long int to phys_size_t.
      This is required for a couple of reasons: long int limits the amount of dram
      to 2GB, and u-boot in general is moving over to phys_size_t to represent the
      size of physical memory.  phys_size_t is defined as an unsigned long on almost
      all current platforms.
      This patch *only* changes the return type of the initdram function (in
      include/common.h, as well as in each board's implementation of initdram).  It
      does not actually modify the code inside the function on any of the platforms;
      platforms which wish to support more than 2GB of DRAM will need to modify
      their initdram() function code.
      Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
      Signed-off-by: default avatarBecky Bruce <becky.bruce@freescale.com>
  4. 04 Mar, 2008 1 commit
  5. 12 Dec, 2007 2 commits
  6. 11 Sep, 2007 2 commits
  7. 06 Jul, 2007 1 commit
  8. 03 May, 2007 2 commits
  9. 19 Oct, 2006 1 commit
  10. 11 Oct, 2006 1 commit
  11. 28 Oct, 2005 1 commit
  12. 01 Aug, 2004 1 commit
    • wdenk's avatar
      Patch by Jon Loeliger, 16 Jul 2004: · 9aea9530
      wdenk authored
      - support larger DDR memories up to 2G on the PC8540/8560ADS and
        STXGP3 boards
      - Made MPC8540/8560ADS be 33Mhz PCI by default.
        and CONFIG_L2_INIT_RAM options.
      - Refactor Local Bus initialization out of SDRAM setup.
      - Re-implement new version of LBC11/DDR11 errata workarounds.
      - Moved board specific PCI init parts out of CPU directory.
      - Added TLB entry for PCI-1 IO Memory
      - Updated README.mpc85xxads
  13. 25 Apr, 2004 1 commit
  14. 18 Apr, 2004 1 commit
    • wdenk's avatar
      * Patch by Dan Malek, 07 Apr 2004: · 7abf0c58
      wdenk authored
        - Add support for RPC/STx GP3, Motorola 8560 board
        - Update 85xx TSEC driver so it searches MII for first available PHY
          and uses that one.
        - Add functions to support console MII commands.
      * Patch by Tolunay Orkun, 07 Apr 2004:
        Move  initialization of bi_iic_fast[]
        from board_init_f() to board_init_r()
      * Patch by Yasushi Shoji, 07 Apr 2004:
        Cleanup microblaze port
      * Patch by Sangmoon Kim, 07 Apr 2004:
        Add auto SDRAM module detection for Debris board
  15. 20 Jan, 2004 1 commit
    • wdenk's avatar
      * The PS/2 mux on the BMS2003 board needs 450 ms after power on · c837dcb1
      wdenk authored
        before we can access it; add delay in case we are faster (with no
        CF card inserted)
      * Cleanup of some init functions
      * Make sure SCC Ethernet is always stopped by the time we boot Linux
        to avoid Linux crashes by early packets coming in.
      * Accelerate flash accesses on LWMON board by using buffered writes
  16. 15 Oct, 2003 1 commit
    • wdenk's avatar
      * Patches by Xianghua Xiao, 15 Oct 2003: · 42d1f039
      wdenk authored
        - Added Motorola CPU 8540/8560 support (cpu/85xx)
        - Added Motorola MPC8540ADS board support (board/mpc8540ads)
        - Added Motorola MPC8560ADS board support (board/mpc8560ads)
      * Minor code cleanup
  17. 10 Sep, 2003 1 commit
  18. 31 Aug, 2003 1 commit
    • wdenk's avatar
      Patch by Yuli Barcohen, 7 Aug 2003: · 326428cc
      wdenk authored
      According to the MPC8260 User's Manual, PCI_MODE signal should be
      reflected in SCCR register, and local bus pins configuration is taken
      from HRCW and appears in SIUMCR. For some reason it does not work
      this way, so the only possibility to detect if the board is
      configured in PCI mode is to check the BCSR. This patch sets SCCR and
      SIUMCR according to the BCSR.
  19. 17 Jul, 2003 1 commit
    • wdenk's avatar
      * Patch by Martin Krause, 17 Jul 2003: · 2535d602
      wdenk authored
        add delay to get I2C working with "imm" command and s3c24x0_i2c.c
      * Patch by Richard Woodruff, 17 July 03:
        - Fixed bug in OMAP1510 baud rate divisor settings.
      * Patch by Nye Liu, 16 July 2003:
        MPC860FADS fixes:
        - add MPC86xADS support (uses MPC86xADS.h)
        - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
          o PLPRCR changes
          o BRG changes (EXTAL/XTAL restricted to 10MHz)
          o don't trust gclk() software measurement by default, depend on
        - add DRAM SIMM not installed detection
        - use more "correct" SDRAM initialization sequence
        - allow different SDRAM sizes (8xxADS has 8M)
        - default DER is 0
        - remove unused MAMR defines from FADS860T.h (all done in fads.c)
        - rename MAMR/MBMR defines to be more consistent. Should eventually
          be merged into MxMR to better reflect the PowerQUICC datasheet.
      * Patch by Yuli Barcohen, 16 Jul 2003:
        support new Motorola PQ2FADS-ZU evaluation board which replaced
        MPC8260ADS and MPC8266ADS
  20. 27 Jun, 2003 1 commit
    • wdenk's avatar
      * Code cleanup: · 8bde7f77
      wdenk authored
        - remove trailing white space, trailing empty lines, C++ comments, etc.
        - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
      * Patches by Kenneth Johansson, 25 Jun 2003:
        - major rework of command structure
          (work done mostly by Michal Cendrowski and Joakim Kristiansen)
  21. 23 Jun, 2003 1 commit
  22. 19 Jun, 2003 1 commit
    • wdenk's avatar
      * Patches by David Mller, 12 Jun 2003: · 48b42616
      wdenk authored
        - rewrite of the S3C24X0 register definitions stuff
        - "driver" for the built-in S3C24X0 RTC
      * Patches by Yuli Barcohen, 12 Jun 2003:
        - Add MII support and Ethernet PHY initialization for MPC8260ADS board
        - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
          configuration word supplied by FPGA on some MPC8260ADS boards
      * Patch by Pantelis Antoniou, 10 Jun 2003:
        Unify status LED interface
  23. 06 Mar, 2003 1 commit
    • wdenk's avatar
      * Patch by Rune Torgersen, 13 Feb 2003: · db2f721f
      wdenk authored
        Add support for Motorola MPC8266ADS board
      * Patch by Kyle Harris, 19 Feb 2003:
        patches for the Intel lubbock board:
        memsetup.S - general cleanup (based on Robert's csb226 code)
        flash.c - overhaul, actually works now
        lubbock.c - fix init funcs to return proper value
      * Patch by Kenneth Johansson, 26 Feb 2003:
        - Fixed off by one in RFTA calculation.
        - No need to abort when LDF is lower than we can program it's only
          minimum timing so clamp it to what we can do.
        - Takes function pointer to function for reading the spd_nvram. Usefull
          for faking data or hardcode a module without the nvram.
        - fix other user for above change
        - fix some comments.
      * Patches by Brian Waite, 26 Feb 2003:
        - fix port for evb64260 board
        - fix PCI for evb64260 board
        - fix PCI scan
      * Patch by Reinhard Meyer, 1 Mar 2003:
        Add support for EMK TOP860 Module
      * Patch by Yuli Barcohen, 02 Mar 2003:
        Add SPD EEPROM support for MPC8260ADS board
  24. 26 Aug, 2002 1 commit