1. 30 Jul, 2014 2 commits
    • Masahiro Yamada's avatar
      Add board MAINTAINERS files · 93d4334f
      Masahiro Yamada authored
      
      
      We have switched to Kconfig and the boards.cfg file is going to
      be removed. We have to retrieve the board status and maintainers
      information from it.
      
      The MAINTAINERS format as in Linux Kernel would be nice
      because we can crib the scripts/get_maintainer.pl script.
      
      After some discussion, we chose to put a MAINTAINERS file under each
      board directory, not the top-level one because we want to collect
      relevant information for a board into a single place.
      
      TODO:
      Modify get_maintainer.pl to scan multiple MAINTAINERS files.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Suggested-by: default avatarTom Rini <trini@ti.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      93d4334f
    • Masahiro Yamada's avatar
      kconfig: add board Kconfig and defconfig files · dd84058d
      Masahiro Yamada authored
      
      
      This commit adds:
       - arch/${ARCH}/Kconfig
          provide a menu to select target boards
       - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
          set CONFIG macros to the appropriate values for each board
       - configs/${TARGET_BOARD}_defconfig
          default setting of each board
      
      (This commit was automatically generated by a conversion script
      based on boards.cfg)
      
      In Linux Kernel, defconfig files are located under
      arch/${ARCH}/configs/ directory.
      It works in Linux Kernel since ARCH is always given from the
      command line for cross compile.
      
      But in U-Boot, ARCH is not given from the command line.
      Which means we cannot know ARCH until the board configuration is done.
      That is why all the "*_defconfig" files should be gathered into a
      single directory ./configs/.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      dd84058d
  2. 12 May, 2014 1 commit
  3. 07 Mar, 2014 1 commit
    • Stefan Roese's avatar
      ppc4xx: Remove 4xx NAND booting support · 345b77ba
      Stefan Roese authored
      
      
      As ppc4xx currently only supports the deprecated nand_spl infrastructure
      and nobody seems to have time / resources to port this over to the newer
      SPL infrastructure, lets remove NAND booting completely.
      
      This should not affect the "normal", non NAND-booting ppc4xx platforms
      that are currently supported.
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
      Cc: Wolfgang Denk <wd@denx.de>
      Cc: Tirumala Marri <tmarri@apm.com>
      Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
      Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
      Cc: Tom Rini <trini@ti.com>
      Tested-by: default avatarMatthias Fuchs <matthias.fuchs@esd.eu>
      345b77ba
  4. 01 Nov, 2013 1 commit
  5. 24 Jul, 2013 1 commit
  6. 15 Mar, 2013 1 commit
    • Simon Glass's avatar
      Replace __bss_end__ with __bss_end · 3929fb0a
      Simon Glass authored
      
      
      Note this is a tree-wide change affecting multiple architectures.
      
      At present we use __bss_start, but mostly __bss_end__. This seems
      inconsistent and in a number of places __bss_end is used instead.
      
      Change to use __bss_end for the BSS end symbol throughout U-Boot. This
      makes it possible to use the asm-generic/sections.h file on all
      archs.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      3929fb0a
  7. 12 Mar, 2013 1 commit
    • Albert ARIBAUD's avatar
      Refactor linker-generated arrays · ef123c52
      Albert ARIBAUD authored
      
      
      Refactor linker-generated array code so that symbols
      which were previously linker-generated are now compiler-
      generated. This causes relocation records of type
      R_ARM_ABS32 to become R_ARM_RELATIVE, which makes
      code which uses LGA able to run before relocation as
      well as after.
      
      Note: this affects more than ARM targets, as linker-
      lists span possibly all target architectures, notably
      PowerPC.
      
      Conflicts:
      	arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
      	arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
      	arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
      	board/ait/cam_enc_4xx/u-boot-spl.lds
      	board/davinci/da8xxevm/u-boot-spl-da850evm.lds
      	board/davinci/da8xxevm/u-boot-spl-hawk.lds
      	board/vpac270/u-boot-spl.lds
      Signed-off-by: default avatarAlbert ARIBAUD <albert.u.boot@aribaud.net>
      ef123c52
  8. 22 Oct, 2012 2 commits
    • Marek Vasut's avatar
      common: Discard the __u_boot_cmd section · 8b493a52
      Marek Vasut authored
      
      
      The command declaration now uses the new LG-array method to generate
      list of commands. Thus the __u_boot_cmd section is now superseded and
      redundant and therefore can be removed. Also, remove externed symbols
      associated with this section from include/command.h .
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Joe Hershberger <joe.hershberger@gmail.com>
      Cc: Mike Frysinger <vapier@gentoo.org>
      8b493a52
    • Marek Vasut's avatar
      common: Add .u_boot_list into all linker files · 55675142
      Marek Vasut authored
      
      
      Add section for the linker-generated lists into all possible linker
      files, so that everyone can easily use these lists. This is mostly
      a mechanical adjustment.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Joe Hershberger <joe.hershberger@gmail.com>
      Cc: Mike Frysinger <vapier@gentoo.org>
      55675142
  9. 15 Oct, 2011 1 commit
  10. 12 May, 2011 1 commit
    • Wolfgang Denk's avatar
      Fix incorrect use of getenv() before relocation · f0c0b3a9
      Wolfgang Denk authored
      
      
      A large number of boards incorrectly used getenv() in their board init
      code running before relocation.  In some cases this caused U-Boot to
      hang when certain environment variables grew too long.
      Fix the code to use getenv_r().
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Cc: Stefan Roese <sr@denx.de>
      Cc: The LEOX team <team@leox.org>
      Cc: Michael Schwingen <michael@schwingen.org>
      Cc: Georg Schardt <schardt@team-ctech.de>
      Cc: Werner Pfister <Pfister_Werner@intercontrol.de>
      Cc: Dirk Eibach <eibach@gdsys.de>
      Cc: Peter De Schrijver <p2@mind.be>
      Cc: John Zhan <zhanz@sinovee.com>
      Cc: Rishi Bhattacharya <rishi@ti.com>
      Cc: Peter Tyser <ptyser@xes-inc.com>
      f0c0b3a9
  11. 29 Apr, 2011 1 commit
    • Scott Wood's avatar
      Handle most LDSCRIPT setting centrally · 83b7e2a7
      Scott Wood authored
      
      
      Currently, some linker scripts are found by common code in config.mk.
      Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is
      sometimes in arch config.mk and sometimes in board config.mk.  Some
      are found using an arch-specific rule for looking in CPUDIR, etc.
      
      Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL
      when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact
      that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds.
      
      Replace all of this -- except for a handful of boards that are actually
      selecting a linker script in a unique way -- with centralized ldscript
      finding.
      
      If board code specifies LDSCRIPT, that will be used.
      Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used.
      
      If neither of these are specified, then the central config.mk will
      check for the existence of the following, in order:
      
      $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT)
      $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT)
      $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
      $(TOPDIR)/$(CPUDIR)/u-boot.lds
      
      Some boards (sc3, cm5200, munices) provided their own u-boot.lds that
      were dead code, because they were overridden by a CPUDIR u-boot.lds under
      the old powerpc rules.  These boards' own u-boot.lds have bitrotted and
      no longer work -- these lds files have been removed.
      Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
      Tested-by: default avatarGraeme Russ <graeme.russ@gmail.com>
      83b7e2a7
  12. 27 Mar, 2011 1 commit
  13. 15 Dec, 2010 1 commit
  14. 17 Nov, 2010 1 commit
    • Sebastien Carlier's avatar
      Switch from archive libraries to partial linking · 6d8962e8
      Sebastien Carlier authored
      
      
      Before this commit, weak symbols were not overridden by non-weak symbols
      found in archive libraries when linking with recent versions of
      binutils.  As stated in the System V ABI, "the link editor does not
      extract archive members to resolve undefined weak symbols".
      
      This commit changes all Makefiles to use partial linking (ld -r) instead
      of creating library archives, which forces all symbols to participate in
      linking, allowing non-weak symbols to override weak symbols as intended.
      This approach is also used by Linux, from which the gmake function
      cmd_link_o_target (defined in config.mk and used in all Makefiles) is
      inspired.
      
      The name of each former library archive is preserved except for
      extensions which change from ".a" to ".o".  This commit updates
      references accordingly where needed, in particular in some linker
      scripts.
      
      This commit reveals board configurations that exclude some features but
      include source files that depend these disabled features in the build,
      resulting in undefined symbols.  Known such cases include:
      - disabling CMD_NET but not CMD_NFS;
      - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
      Signed-off-by: default avatarSebastien Carlier <sebastien.carlier@gmail.com>
      6d8962e8
  15. 18 Oct, 2010 2 commits
    • Wolfgang Denk's avatar
      Makefile: move all Power Architecture boards into boards.cfg · 2ae18241
      Wolfgang Denk authored
      
      
      Clean up Makefile, and drop a lot of the config.mk files on the way.
      
      We now also automatically pick all boards that are listed in
      boards.cfg (and with all configurations), so we can drop the redundant
      entries from MAKEALL to avoid building these twice.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      2ae18241
    • Wolfgang Denk's avatar
      Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE · 14d0a02a
      Wolfgang Denk authored
      
      
      The change is currently needed to be able to remove the board
      configuration scripting from the top level Makefile and replace it by
      a simple, table driven script.
      
      Moving this configuration setting into the "CONFIG_*" name space is
      also desirable because it is needed if we ever should move forward to
      a Kconfig driven configuration system.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      14d0a02a
  16. 23 Sep, 2010 3 commits
  17. 24 Jul, 2010 1 commit
  18. 04 Jul, 2010 1 commit
    • Wolfgang Denk's avatar
      Make sure that argv[] argument pointers are not modified. · 54841ab5
      Wolfgang Denk authored
      
      
      The hush shell dynamically allocates (and re-allocates) memory for the
      argument strings in the "char *argv[]" argument vector passed to
      commands.  Any code that modifies these pointers will cause serious
      corruption of the malloc data structures and crash U-Boot, so make
      sure the compiler can check that no such modifications are being done
      by changing the code into "char * const argv[]".
      
      This modification is the result of debugging a strange crash caused
      after adding a new command, which used the following argument
      processing code which has been working perfectly fine in all Unix
      systems since version 6 - but not so in U-Boot:
      
      int main (int argc, char **argv)
      {
      	while (--argc > 0 && **++argv == '-') {
      /* ====> */	while (*++*argv) {
      			switch (**argv) {
      			case 'd':
      				debug++;
      				break;
      			...
      			default:
      				usage ();
      			}
      		}
      	}
      	...
      }
      
      The line marked "====>" will corrupt the malloc data structures and
      usually cause U-Boot to crash when the next command gets executed by
      the shell.  With the modification, the compiler will prevent this with
      an
      	error: increment of read-only location '*argv'
      
      N.B.: The code above can be trivially rewritten like this:
      
      	while (--argc > 0 && **++argv == '-') {
      		char *arg = *argv;
      		while (*++arg) {
      			switch (*arg) {
      			...
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Acked-by: default avatarMike Frysinger <vapier@gentoo.org>
      54841ab5
  19. 21 Apr, 2010 1 commit
  20. 13 Apr, 2010 1 commit
  21. 09 Nov, 2009 1 commit
  22. 02 Nov, 2009 1 commit
  23. 03 Oct, 2009 2 commits
    • Stefan Roese's avatar
      ppc4xx: Big cleanup of PPC4xx defines · 297a6587
      Stefan Roese authored
      
      
      This patch cleans up multiple issues of the 4xx register (mostly
      DCR, SDR, CPR, etc) definitions:
      
      - Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
      - Change the defines to better match the names from the
        user's manuals (e.g. cprpllc -> CPR0_PLLC)
      - Removal of some unused defines
      
      Please test this patch intensive on your PPC4xx platform. Even though
      I tried not to break anything and tested successfully on multiple
      4xx AMCC platforms, testing on custom platforms is recommended.
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
      297a6587
    • Peter Tyser's avatar
      ppc: Enable full relocation to RAM · 85829017
      Peter Tyser authored
      
      
      The following changes allow U-Boot to fully relocate from flash to
      RAM:
       - Remove linker scripts' .fixup sections from the .text section
       - Add -mrelocatable to PLATFORM_RELFLAGS for all boards
       - Define CONFIG_RELOC_FIXUP_WORKS for all boards
      
      Previously, U-Boot would partially relocate, but statically initialized
      pointers needed to be manually relocated.
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      85829017
  24. 28 Sep, 2009 1 commit
  25. 11 Sep, 2009 1 commit
    • Stefan Roese's avatar
      ppc4xx: Big cleanup of PPC4xx defines · d1c3b275
      Stefan Roese authored
      
      
      This patch cleans up multiple issues of the 4xx register (mostly
      DCR, SDR, CPR, etc) definitions:
      
      - Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
      - Change the defines to better match the names from the
        user's manuals (e.g. cprpllc -> CPR0_PLLC)
      - Removal of some unused defines
      
      Please test this patch intensive on your PPC4xx platform. Even though
      I tried not to break anything and tested successfully on multiple
      4xx AMCC platforms, testing on custom platforms is recommended.
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
      d1c3b275
  26. 12 Jun, 2009 1 commit
    • Wolfgang Denk's avatar
      General help message cleanup · a89c33db
      Wolfgang Denk authored
      
      
      Many of the help messages were not really helpful; for example, many
      commands that take no arguments would not print a correct synopsis
      line, but "No additional help available." which is not exactly wrong,
      but not helpful either.
      
      Commit ``Make "usage" messages more helpful.'' changed this
      partially. But it also became clear that lots of "Usage" and "Help"
      messages (fields "usage" and "help" in struct cmd_tbl_s respective)
      were actually redundant.
      
      This patch cleans this up - for example:
      
      Before:
      	=> help dtt
      	dtt - Digital Thermometer and Thermostat
      
      	Usage:
      	dtt         - Read temperature from digital thermometer and thermostat.
      
      After:
      	=> help dtt
      	dtt - Read temperature from Digital Thermometer and Thermostat
      
      	Usage:
      	dtt
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      a89c33db
  27. 20 Mar, 2009 1 commit
    • Trent Piepho's avatar
      Fix all linker script to handle all rodata sections · f62fb999
      Trent Piepho authored
      
      
      A recent gcc added a new unaligned rodata section called '.rodata.str1.1',
      which needs to be added the the linker script.  Instead of just adding this
      one section, we use a wildcard ".rodata*" to get all rodata linker section
      gcc has now and might add in the future.
      
      However, '*(.rodata*)' by itself will result in sub-optimal section
      ordering.  The sections will be sorted by object file, which causes extra
      padding between the unaligned rodata.str.1.1 of one object file and the
      aligned rodata of the next object file.  This is easy to fix by using the
      SORT_BY_ALIGNMENT command.
      
      This patch has not be tested one most of the boards modified.  Some boards
      have a linker script that looks something like this:
      
      *(.text)
      . = ALIGN(16);
      *(.rodata)
      *(.rodata.str1.4)
      *(.eh_frame)
      
      I change this to:
      
      *(.text)
      . = ALIGN(16);
      *(.eh_frame)
      *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
      
      This means the start of rodata will no longer be 16 bytes aligned.
      However, the boundary between text and rodata/eh_frame is still aligned to
      16 bytes, which is what I think the real purpose of the ALIGN call is.
      Signed-off-by: default avatarTrent Piepho <xyzzy@speakeasy.org>
      f62fb999
  28. 28 Jan, 2009 2 commits
  29. 18 Nov, 2008 1 commit
  30. 18 Oct, 2008 1 commit
  31. 10 Sep, 2008 1 commit
  32. 02 Jul, 2008 2 commits