1. 14 Aug, 2013 1 commit
  2. 12 Aug, 2013 6 commits
  3. 09 Aug, 2013 11 commits
  4. 06 Aug, 2013 1 commit
  5. 03 Aug, 2013 1 commit
    • Marek Vasut's avatar
      i2c: soft: Fix typo in CONFIG_SYS_I2C_SOFT_SPEED · 90f002a9
      Marek Vasut authored
      
      
      In case only the CONFIG_SYS_I2C_SPEED is set in configuration file,
      the CONFIG_SYS_I2C_SOFT_SPEED is defined as CONFIG_SYS_I2C_SPEED.
      The CONFIG_SYS_I2C_SOFT_SPEED is then used throughout the driver.
      
      Unfortunatelly, due to a typo in the driver, instead of defining
      CONFIG_SYS_I2C_SOFT_SPEED, an CONFIG_SYS_SOFT_I2C_SPEED was defined
      and therefore the driver failed to compile. The same applies for
      CONFIG_SYS_I2C_SOFT_SLAVE , where the swap happens as well.
      
      This patch fixes the issue.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Heiko Schocher <hs@denx.de>
      90f002a9
  6. 02 Aug, 2013 2 commits
  7. 30 Jul, 2013 1 commit
  8. 29 Jul, 2013 8 commits
    • Lukasz Majewski's avatar
      dfu: Implementation of target reset after communication with dfu-util's -R switch · 6bed7ce5
      Lukasz Majewski authored
      
      
      This patch extends dfu code to support transmission with -R switch
      specified at dfu-util.
      
      When -R is specified, the extra USB_REQ_DFU_DETACH request is sent after
      successful data transmission. Then dfu resources are released and reset
      command is issued.
      Signed-off-by: default avatarLukasz Majewski <l.majewski@samsung.com>
      Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
      6bed7ce5
    • Marek Vasut's avatar
      usb: mv_udc: Add bounce buffer · 6dd30af0
      Marek Vasut authored
      
      
      The requests sent to the controller are not properly cache aligned
      most of the time, thus implement a simple bounce buffer to avoid
      problem with cache.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Lei Wen <leiwen@marvell.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      6dd30af0
    • Marek Vasut's avatar
      usb: mv_udc: Improve allocation of qTD items · 8a095a68
      Marek Vasut authored
      
      
      Allocate the qTD items all at once instead of allocating them
      separately. Moreover, make sure each qTD is properly aligned
      to 32-bytes boundary and that cache can be safely flushed over
      each qTD touple.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Lei Wen <leiwen@marvell.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      8a095a68
    • Marek Vasut's avatar
      usb: mv_udc: Move QH and qTD into mv_drv · ab52df19
      Marek Vasut authored
      
      
      Both the endpoint queue head and the endpoint item list is a controller
      specific thing. Move them both into controller private data.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Lei Wen <leiwen@marvell.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      ab52df19
    • Marek Vasut's avatar
      usb: mv_udc: Make use of struct ehci_ctrl · be7ed253
      Marek Vasut authored
      
      
      The usb_lowlevel_init() call already fills and passes back struct
      ehci_ctrl , which readily contains correctly determined address of
      the port register block address computed from values from controller
      configuration registers. Leverage this and make use of this value
      as this makes the code mode universal, but also gets us rid of the
      CONFIG_USB_REG_BASE configuration option.
      
      Moreover, this patch cleans up the usb_gadget_register_driver() call
      a little by correcting the error handling. Note the usb_lowlevel_init()
      and mvudc_probe() are now called in reversed order, but this has no
      impact on the code.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Lei Wen <leiwen@marvell.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      be7ed253
    • Marek Vasut's avatar
      usb: mv_udc: Clean up the EP initialization · 2ea4b448
      Marek Vasut authored
      
      
      Move the constant values that are programmed into mv_ep.ep into
      separate static const structure so they can be memcpy()'d when
      the initialization happens.
      
      Moveover, we only every init NUM_ENDPOINTS, not 2 * NUM_ENDPOINTS,
      so fix this bug as well.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Lei Wen <leiwen@marvell.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      2ea4b448
    • Marek Vasut's avatar
      usb: mv_udc: Move endpoint array into driver data · 532d846f
      Marek Vasut authored
      
      
      The endpoints are operated on a per-controller basis, move the
      endpoint array into controller's private data. Also shuffle the
      struct mv_ep structure definition just above the definition of
      the struct mv_drv so they're well grouped together.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Lei Wen <leiwen@marvell.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      532d846f
    • Marek Vasut's avatar
      usb: mv_udc: Clean up mv_udc.h · 6368c919
      Marek Vasut authored
      
      
      Do a coding-style cleanup of this file and throw away useless
      defined values. These values were likely a result of a copy-paste
      job.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Lei Wen <leiwen@marvell.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      6368c919
  9. 25 Jul, 2013 4 commits
  10. 24 Jul, 2013 5 commits