1. 22 Nov, 2015 1 commit
  2. 24 Oct, 2015 1 commit
  3. 21 Oct, 2015 1 commit
  4. 28 Sep, 2015 1 commit
    • Igor Grinberg's avatar
      configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST · e0bed6b6
      Igor Grinberg authored
      The config option has been removed by one of the syncs with the Linux
      mainline MTD subsystem:
      ff94bc40
      
       (mtd, ubi, ubifs: resync with Linux-3.14)
      It has been left inside the config files. Currently does not look to
      serve any purpose, so remove it now from all the configs.
      Signed-off-by: default avatarIgor Grinberg <grinberg@compulab.co.il>
      Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
      Cc: Stefan Roese <sr@denx.de>
      Cc: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>
      Cc: Peter Barada <peter.barada@logicpd.com>
      Cc: Steve Sakoman <sakoman@gmail.com>
      Cc: Peter Tyser <ptyser@xes-inc.com>
      Cc: Joe Hershberger <joe.hershberger@ni.com>
      Cc: Simon Glass <sjg@chromium.org>
      Acked-by: default avatarStefan Roese <sr@denx.de>
      e0bed6b6
  5. 26 Jun, 2015 1 commit
  6. 01 Jun, 2015 1 commit
  7. 12 Jan, 2015 1 commit
  8. 24 Jan, 2014 1 commit
  9. 25 Nov, 2013 1 commit
  10. 04 Nov, 2013 2 commits
  11. 24 Jul, 2013 1 commit
  12. 23 Jul, 2013 1 commit
  13. 07 Jun, 2013 1 commit
    • Gabor Juhos's avatar
      pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option · 842033e6
      Gabor Juhos authored
      
      
      The pci_indirect.c file is always compiled when
      CONFIG_PCI is defined although the indirect PCI
      bridge support is not needed by every board.
      
      Introduce a new CONFIG_PCI_INDIRECT_BRIDGE
      config option and only compile indirect PCI
      bridge support if this options is enabled.
      
      Also add the new option into the configuration
      files of the boards which needs that.
      
      Compile tested for powerpc, x86, arm and nds32.
      MAKEALL results:
      
      powerpc:
        --------------------- SUMMARY ----------------------------
        Boards compiled: 641
        Boards with warnings but no errors: 2 ( ELPPC MPC8323ERDB )
        ----------------------------------------------------------
        Note: the warnings for ELPPC and MPC8323ERDB are present even
        without the actual patch.
      
      x86:
        --------------------- SUMMARY ----------------------------
        Boards compiled: 1
        ----------------------------------------------------------
      
      arm:
        --------------------- SUMMARY ----------------------------
        Boards compiled: 311
        ----------------------------------------------------------
      
      nds32:
        --------------------- SUMMARY ----------------------------
        Boards compiled: 3
        ----------------------------------------------------------
      
      Cc: Tom Rini <trini@ti.com>
      Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
      Signed-off-by: default avatarGabor Juhos <juhosg@openwrt.org>
      842033e6
  14. 15 Oct, 2012 1 commit
  15. 20 Jun, 2012 1 commit
  16. 05 Oct, 2011 1 commit
  17. 26 Oct, 2010 2 commits
    • Wolfgang Denk's avatar
      Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value · 25ddd1fb
      Wolfgang Denk authored
      
      
      CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
      being able to use "sizeof(struct global_data)" in assembler files.
      Recent experience has shown that manual synchronization is not
      reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
      GENERATED_GBL_DATA_SIZE which gets automatically generated by the
      asm-offsets tool.  In the result, all definitions of this value can be
      deleted from the board config files.  We have to make sure that all
      files that reference such data include the new <asm-offsets.h> file.
      
      No other changes have been done yet, but it is obvious that similar
      changes / simplifications can be done for other, related macro
      definitions as well.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Acked-by: default avatarKumar Gala <galak@kernel.crashing.org>
      25ddd1fb
    • Wolfgang Denk's avatar
      Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE · 553f0982
      Wolfgang Denk authored
      
      
      CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be
      some end address; to make the meaning more clear we rename it into
      CONFIG_SYS_INIT_RAM_SIZE
      
      No other code changes are performed in this patch, only minor editing
      of white space (due to the changed length) and the comments was done,
      where noticed.
      
      Note that the code for the PATI and cmi_mpc5xx board configurations
      looks seriously broken.  Last known maintainers on Cc:
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Cc: Denis Peter <d.peter@mpl.ch>
      Cc: Martin Winistoerfer <martinwinistoerfer@gmx.ch>
      Acked-by: default avatarKumar Gala <galak@kernel.crashing.org>
      553f0982
  18. 22 Oct, 2010 5 commits
  19. 18 Oct, 2010 3 commits
    • Peter Tyser's avatar
      powerpc: Cleanup BOOTFLAG_* references · d98b0523
      Peter Tyser authored
      
      
      Now that warm booting is not supported, there isn't a need for the
      BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them.
      
      Note that this change makes the board info bd_bootflags field useless.
      It will always be set to 0, but we leave it around so that we don't
      break the board info structure that some OSes are expecting to be passed
      from U-Boot.
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      d98b0523
    • Wolfgang Denk's avatar
      Makefile: move all Power Architecture boards into boards.cfg · 2ae18241
      Wolfgang Denk authored
      
      
      Clean up Makefile, and drop a lot of the config.mk files on the way.
      
      We now also automatically pick all boards that are listed in
      boards.cfg (and with all configurations), so we can drop the redundant
      entries from MAKEALL to avoid building these twice.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      2ae18241
    • Wolfgang Denk's avatar
      Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE · 14d0a02a
      Wolfgang Denk authored
      
      
      The change is currently needed to be able to remove the board
      configuration scripting from the top level Makefile and replace it by
      a simple, table driven script.
      
      Moving this configuration setting into the "CONFIG_*" name space is
      also desirable because it is needed if we ever should move forward to
      a Kconfig driven configuration system.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      14d0a02a
  20. 13 Oct, 2010 1 commit
  21. 20 Jul, 2010 1 commit
  22. 08 Dec, 2009 1 commit
  23. 03 Oct, 2009 2 commits
    • Kumar Gala's avatar
      ppc/85xx: Fix LCRR_CLKDIV defines · 68f9c1e7
      Kumar Gala authored
      
      
      For some reason the CLKDIV field varies between SoC in how it interprets
      the bit values.
      
      All 83xx and early (e500v1) PQ3 devices support:
       clk/2: CLKDIV = 2
       clk/4: CLKDIV = 4
       clk/8: CLKDIV = 8
      
      Newer PQ3 (e500v2) and MPC86xx support:
       clk/4: CLKDIV = 2
       clk/8: CLKDIV = 4
       clk/16: CLKDIV = 8
      
      Ensure that the MPC86xx and MPC85xx still get the same behavior and make
      the defines reflect their logical view (not the value of the field).
      Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
      Acked-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      68f9c1e7
    • Peter Tyser's avatar
      ppc: Enable full relocation to RAM · 85829017
      Peter Tyser authored
      
      
      The following changes allow U-Boot to fully relocate from flash to
      RAM:
       - Remove linker scripts' .fixup sections from the .text section
       - Add -mrelocatable to PLATFORM_RELFLAGS for all boards
       - Define CONFIG_RELOC_FIXUP_WORKS for all boards
      
      Previously, U-Boot would partially relocate, but statically initialized
      pointers needed to be manually relocated.
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      85829017
  24. 24 Sep, 2009 1 commit
    • Kumar Gala's avatar
      ppc/85xx: Fix LCRR_CLKDIV defines · 202d9487
      Kumar Gala authored
      
      
      For some reason the CLKDIV field varies between SoC in how it interprets
      the bit values.
      
      All 83xx and early (e500v1) PQ3 devices support:
       clk/2: CLKDIV = 2
       clk/4: CLKDIV = 4
       clk/8: CLKDIV = 8
      
      Newer PQ3 (e500v2) and MPC86xx support:
       clk/4: CLKDIV = 2
       clk/8: CLKDIV = 4
       clk/16: CLKDIV = 8
      
      Ensure that the MPC86xx and MPC85xx still get the same behavior and make
      the defines reflect their logical view (not the value of the field).
      Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
      Acked-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      202d9487
  25. 28 Aug, 2009 1 commit
  26. 22 Jul, 2009 1 commit
  27. 20 Jul, 2009 2 commits
  28. 02 Jul, 2009 1 commit
  29. 12 Jun, 2009 1 commit
    • Peter Tyser's avatar
      i2c: Remove deprecated individual i2c commands · d48eb513
      Peter Tyser authored
      
      
      The following individual I2C commands have been removed: imd, imm, inm,
      imw, icrc32, iprobe, iloop, isdram.
      
      The functionality of the individual commands is still available via
      the 'i2c' command.
      
      This change only has an impact on those boards which did not have
      CONFIG_I2C_CMD_TREE defined.
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      d48eb513
  30. 17 Feb, 2009 1 commit