1. 07 Aug, 2006 2 commits
  2. 28 Jul, 2006 1 commit
  3. 27 Jul, 2006 3 commits
  4. 26 Jul, 2006 1 commit
  5. 23 Jul, 2006 1 commit
  6. 22 Jul, 2006 1 commit
  7. 21 Jul, 2006 19 commits
  8. 19 Jul, 2006 10 commits
    • Wolfgang Denk's avatar
      Add support for high-boot on TQM5200 and TQM5200S boards. · 978b1096
      Wolfgang Denk authored
      Hint: the CPLD on the TQM5200 must be programmed with a software
      version supporting the high boot option! The new TQM5200S is
      already supporting this option. On the TQM5200 this option will be
      supported in configurations with MPC5200 rev B processors.
      
      To actually "high boot", set jumper X30 on the STK52xx.
      
      Patch by Martin Krause, 12 Jul 2006
      978b1096
    • Wolfgang Denk's avatar
      Add support for new TQM5200 revisions · 45a212c4
      Wolfgang Denk authored
      - Support for TQM5200S (short version without graphic controller)
      - Support for modules with 'N' type S29GL128N Spansion flashes
        (requires changes to flash layout)
      - Support for MPC5200B cpu (mostly support for second SDRAM bank)
      45a212c4
    • Wolfgang Denk's avatar
      Fix support for PS/2 keyboard on TQM85xx boards · bd3143f0
      Wolfgang Denk authored
      The PS/2 keyobard driver for the TQM85xx modules only supports the
      internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
      include a DUART, the TQM8560 modules can't be used with the PS/2
      keyboard controller on the STK85xx board.
      The PS/2 keyboard driver should work with the modules TQM8540,
      TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
      
      Make sure the PS/2 controller on the STK85xx is programmed. Jumper
      settings: X66 1-2, 9-10; X61 2-3
      
      Patch by Martin Krause, 21 Jun 2006
      bd3143f0
    • Wolfgang Denk's avatar
      Adjust RTC century handling on STK52xx board to match Linux driver. · edd0b509
      Wolfgang Denk authored
      Patch by Martin Krause, 12 Jun 2006
      edd0b509
    • Wolfgang Denk's avatar
      Adjust filenames for USB update images on TRAB board. · c786f427
      Wolfgang Denk authored
      During an automatic update via USB stick, U-Boot searches for
      images with the name "firmware.img" and "kernel.img". This names
      are now changed to "firmw_01.img" and "kernl_01.img". This is done,
      to prevent updates of new boards (with the new macronics "c" step
      flashes) with old, incompatible firmware or kernel versions.
      Patch by Martin Krause, 21 Jun 2006
      c786f427
    • Wolfgang Denk's avatar
      Bugfix in VFD routine on TRAB board. · d053ce62
      Wolfgang Denk authored
      Make sure upper lext pixel can be set to blue, too
      (so far only red was possible).
      Patch by Martin Krause, 15 Feb 2006
      d053ce62
    • Wolfgang Denk's avatar
      89366010
    • Wolfgang Denk's avatar
      Fix some bugs in TRAB board flash driver. · 5a3dfef7
      Wolfgang Denk authored
      - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
      - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
      - remove "Unlock Bypass" mode, because macronix flashes do not support
        this mode officially
      - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
        for Intel compatible flashes, not for AMD compatible.
      Patch by Martin Krause, 15 Feb 2006
      5a3dfef7
    • Wolfgang Denk's avatar
      Add additional error messages to flash driver on TRAB board · 0de7fa59
      Wolfgang Denk authored
      (for erase errors and timeout errors)
      Patch by Martin Krause, 14 Feb 2006
      0de7fa59
    • Wolfgang Denk's avatar
      Add support for TB5200 board · b87dfd28
      Wolfgang Denk authored
      The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
      integrated in a little aluminium case.
      Patch by Martin Krause, 8 Jun 2006
      
      Some code cleanup
      b87dfd28
  9. 18 Jul, 2006 1 commit
  10. 13 Jul, 2006 1 commit