1. 21 Aug, 2015 1 commit
  2. 26 Jun, 2015 2 commits
  3. 01 Jun, 2015 2 commits
  4. 12 May, 2015 1 commit
  5. 15 Mar, 2015 1 commit
  6. 05 Dec, 2014 1 commit
    • Shengzhou Liu's avatar
      powerpc/t1024qds: Add T1024 QDS board support · aba80048
      Shengzhou Liu authored
      T1024QDS is a high-performance computing evaluation, development and
      test platform for T1024 QorIQ Power Architecture processor.
      T1024QDS board Overview
      - T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
      - CoreNet fabric supporting coherent and noncoherent transactions with
        prioritization and bandwidth allocation
      - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
      - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
      - Ethernet interfaces:
        - Two 10M/100M/1G RGMII ports on-board
        - Three 1G/2.5Gbps SGMII ports
        - Four 1Gbps QSGMII ports
        - one 10Gbps XFI or 10Base-KR interface
      - SerDes: 4 lanes up to 10.3125GHz Supporting SGMII/QSGMII, XFI, PCIe, SATA and Aurora
      - PCIe: Three PCI Express controllers with five PCIe slots.
      - IFC: 128MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
      - Video: DIU supports video up to 1280x1024x32 bpp.
        - Chrontel CH7201 for HDMI connection.
        - TI DS90C387R for direct LCD connection.
        - Raw (not encoded) video connector for testing or other encoders.
      - QUICC Engine block
        - 32-bit RISC controller for flexible support of the communications peripherals
        - Serial DMA channel for receive and transmit on all serial channels
        - Two universal communication controllers, supporting TDM, HDLC, and UART
      - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
      - eSPI: Three SPI flash devices.
      - SATA: one SATA 2.O.
      - USB: Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
      - eSDHC: Support SD, SDHC, SDXC and MMC/eMMC.
      - I2C: Four I2C controllers.
      - UART: Two UART on board.
      Signed-off-by: default avatarShengzhou Liu <Shengzhou.Liu@freescale.com>
      [York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
      	   Fix Kconfig by adding SUPPORT_SPL]
      Reviewed-by: default avatarYork Sun <yorksun@freescale.com>