1. 12 Jun, 2009 1 commit
    • Wolfgang Denk's avatar
      General help message cleanup · a89c33db
      Wolfgang Denk authored
      Many of the help messages were not really helpful; for example, many
      commands that take no arguments would not print a correct synopsis
      line, but "No additional help available." which is not exactly wrong,
      but not helpful either.
      
      Commit ``Make "usage" messages more helpful.'' changed this
      partially. But it also became clear that lots of "Usage" and "Help"
      messages (fields "usage" and "help" in struct cmd_tbl_s respective)
      were actually redundant.
      
      This patch cleans this up - for example:
      
      Before:
      	=> help dtt
      	dtt - Digital Thermometer and Thermostat
      
      	Usage:
      	dtt         - Read temperature from digital thermometer and thermostat.
      
      After:
      	=> help dtt
      	dtt - Read temperature from Digital Thermometer and Thermostat
      
      	Usage:
      	dtt
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      a89c33db
  2. 20 Mar, 2009 1 commit
  3. 28 Jan, 2009 1 commit
    • Peter Tyser's avatar
      Command usage cleanup · 2fb2604d
      Peter Tyser authored
      Remove command name from all command "usage" fields and update
      common/command.c to display "name - usage" instead of
      just "usage". Also remove newlines from command usage fields.
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      2fb2604d
  4. 03 Jun, 2008 1 commit
    • Stefan Roese's avatar
      ppc4xx: Remove superfluous dram_init() call or replace it by initdram() · bbeff30c
      Stefan Roese authored
      Historically the 405 U-Boot port had a dram_init() call in early init
      stage. This function was still called from start.S and most of the time
      coded in assembler. This is not needed anymore (since a long time) and
      boards should implement the common initdram() function in C instead.
      
      This patch now removed the dram_init() call from start.S and removes the
      empty implementations that are scattered through most of the 405 board
      ports. Some older board ports really implement this dram_init() though.
      These are:
      
      csb272
      csb472
      ERIC
      EXBITGEN
      W7OLMC
      W7OLMG
      
      I changed those boards to call this assembler dram_init() function now
      from their board specific initdram() instead. This *should* work, but please
      test again on those platforms. And it is perhaps a good idea that those
      boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
      some time. So further patches welcome here.
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
      bbeff30c
  5. 31 Mar, 2006 1 commit
  6. 13 Oct, 2005 1 commit
  7. 16 Dec, 2004 1 commit
  8. 16 Sep, 2004 1 commit
  9. 20 Jan, 2004 1 commit
    • wdenk's avatar
      * The PS/2 mux on the BMS2003 board needs 450 ms after power on · c837dcb1
      wdenk authored
        before we can access it; add delay in case we are faster (with no
        CF card inserted)
      
      * Cleanup of some init functions
      
      * Make sure SCC Ethernet is always stopped by the time we boot Linux
        to avoid Linux crashes by early packets coming in.
      
      * Accelerate flash accesses on LWMON board by using buffered writes
      c837dcb1
  10. 27 Jun, 2003 1 commit
    • wdenk's avatar
      * Code cleanup: · 8bde7f77
      wdenk authored
        - remove trailing white space, trailing empty lines, C++ comments, etc.
        - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
      
      * Patches by Kenneth Johansson, 25 Jun 2003:
        - major rework of command structure
          (work done mostly by Michal Cendrowski and Joakim Kristiansen)
      8bde7f77
  11. 30 Aug, 2002 1 commit
  12. 26 Aug, 2002 1 commit