1. 06 Jan, 2004 1 commit
  2. 27 Dec, 2003 1 commit
    • wdenk's avatar
      * Make CPU clock on ICA-IP board controllable by a "cpuclk" · 7cb22f97
      wdenk authored
        environment variable which can set to "100", "133", or "150". The
        CPU clock will be configured accordingly upon next reboot. Other
        values are ignored. In case of an invalid or undefined "cpuclk"
        value, the compile-time default CPU clock speed will be used.
      
      * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
        window that is used to access the UART registers by the Linux driver)
      
      * Patch by Reinhard Meyer, 20 Dec 2003:
        Fix clock calculation for the MPC5200 for higher clock frequencies
        (above 2**32 / 10 = 429.5 MHz).
      7cb22f97
  3. 12 Dec, 2003 1 commit
  4. 17 Aug, 2003 1 commit
    • wdenk's avatar
      * Make Ethernet autonegotiation on INCA-IP work for all clock rates; · e0ac62d7
      wdenk authored
        allow selection of clock frequency as "make" target
      
      * Implement memory autosizing code for IceCube boards
      
      * Configure network port on INCA-IP for autonegotiation
      
      * Fix overflow problem in network timeout code
      
      * Patch by Richard Woodruff, 8 Aug 2003:
        Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
      e0ac62d7
  5. 31 Jul, 2003 1 commit
  6. 20 Apr, 2003 1 commit
    • wdenk's avatar
      * Make sure Block Lock Bits get cleared in R360MPI flash driver · d791b1dc
      wdenk authored
      * MPC823 LCD driver: Fill color map backwards, to allow for steady
        display when Linux takes over
      
      * Patch by Erwin Rol, 27 Feb 2003:
        Add support for RTEMS (this time for real).
      
      * Add support for "bmp info" and "bmp display" commands to load
        bitmap images; this can be used (for example in a "preboot"
        command) to display a splash screen very quickly after poweron.
      
      * Add support for 133 MHz clock on INCA-IP board
      d791b1dc
  7. 05 Apr, 2003 1 commit
    • wdenk's avatar
      * Patch by Arun Dharankar, 4 Apr 2003: · 3e38691e
      wdenk authored
        Add IDMA example code (tested on 8260 only)
      
      * Add support for Purple Board (MIPS64 5Kc)
      
      * Add support for MIPS64 5Kc CPUs
      
      * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
      
      * Patch by Denis Peter, 04 Apr 2003:
        - update MIP405-4 board
      
      * Patches by Denis Peter, 03 April 2003:
        - fix PCI IRQs on MPL boards
        - fix two more un-relocated pointer problems
      
      * Fix behaviour of "run" command:
        - print error message iv variable does not exist
        - terminate processing of arguments in case of error
      
      * Patches by Peter Figuli, 10 Mar 2003
        - Add support for BTUART on PXA platform
        - Add support for WEP EP250 (PXA) board
      
      * Fix flash problems on INCA-IP; add tool to allow bruning images  to
        flash using a BDI2000
      
      * Implement fix for I2C Edge Conditions problem for all boards that
        use the bit-banging driver (common/soft_i2c.c)
      
      * Add patches by Robert Schwebel, 31 Mar 2003:
        - csb226 board: bring in sync with innokom/memsetup.S
        - csb226 board: fix...
      3e38691e
  8. 27 Mar, 2003 1 commit