1. 24 Jan, 2004 1 commit
  2. 21 Jan, 2004 1 commit
  3. 20 Jan, 2004 1 commit
    • wdenk's avatar
      * The PS/2 mux on the BMS2003 board needs 450 ms after power on · c837dcb1
      wdenk authored
        before we can access it; add delay in case we are faster (with no
        CF card inserted)
      
      * Cleanup of some init functions
      
      * Make sure SCC Ethernet is always stopped by the time we boot Linux
        to avoid Linux crashes by early packets coming in.
      
      * Accelerate flash accesses on LWMON board by using buffered writes
      c837dcb1
  4. 18 Jan, 2004 1 commit
  5. 16 Jan, 2004 1 commit
    • wdenk's avatar
      [Strange. I _did_ check these in before. Seems SF restored an old · 1c43771b
      wdenk authored
      version of the repository???]
      
      * Patch by Reinhard Meyer, 09 Jan 2004:
        - add RTC support for MPC5200 based boards (requires RTC_XTAL)
      
      * Add support for IDE LED on BMS2003 board
        (exclusive with status LED!)
      
      * Add support for PS/2 keyboard (used with PS/2 multiplexor on
        BMS2003 board)
      
      * Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
        Add common files for "emk" boards
      1c43771b
  6. 06 Jan, 2004 3 commits
  7. 04 Jan, 2004 2 commits
    • wdenk's avatar
      * Make BMS2003 use a separate config file to avoid #ifdef mess; · a522fa0e
      wdenk authored
        add I2C support; add support for DS1337 RTC
      
      * Add CompactFlash support  for BMS2003 board
      
      * Add support for status LED on BMS2003 board
      a522fa0e
    • wdenk's avatar
      * Fix problems caused by Robert Schwebel's cramfs patch · 180d3f74
      wdenk authored
      * Patch by Scott McNutt, 02 Jan 2004:
        Add support for the Nios Active Serial Memory Interface (ASMI)
        on Cyclone devices
      
      * Patch by Andrea Marson, 16 Dec 2003:
        Add support for the PPChameleon ME and HI modules
      
      * Patch by Yuli Barcohen, 22 Dec 2003:
        Add support for Motorola DUET ADS board (MPC87x/88x)
      180d3f74
  8. 03 Jan, 2004 3 commits
    • wdenk's avatar
      * Patch by Robert Schwebel, 15 Dec 2003: · dd875c76
      wdenk authored
        add support for cramfs (uses JFFS2 command interface)
      dd875c76
    • wdenk's avatar
      Patches by Stephan Linz, 11 Dec 2003: · c935d3bd
      wdenk authored
      - more documentation for NIOS port
      - new struct nios_pio_t, struct nios_spi_t
      - Reconfiguration for NIOS Development Kit DK1C20:
        o move board related code from board/dk1c20
          to board/altera/dk1c20
        o create a new common source path board/altera/common
          and move generic flash access stuff into it
        o change/expand configuration file DK1C20.h
      - Add support for NIOS Development Kit DK1S10
      - Add status LED support for NIOS systems
      - Add dual 7-segment LED support for Altera NIOS DevKits
      c935d3bd
    • wdenk's avatar
      * Patch by Ronen Shitrit, 10 Dec 2003: · 3a473b2a
      wdenk authored
        Add support for the Marvell DB64360 / DB64460 development boards
      
      * Patch by Detlev Zundel, 10 Dec 2003:
        fix dependency problem in examples/Makefile
      3a473b2a
  9. 02 Jan, 2004 3 commits
    • wdenk's avatar
      * Patch by Denis Peter, 8 Dec 2003 · b6e4c403
      wdenk authored
        - add support for the PATI board (MPC555)
        - add SPI support for the MPC5xx
      
      * Patch by Anders Larsen, 08 Dec 2003:
        add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
        to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
        cleanup some redundand #defines
      b6e4c403
    • wdenk's avatar
      * Patch by Andr Schwarz, 8 Dec 2003: · 63f34912
      wdenk authored
        fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
        - TX and RX deskriptors must be quad-word aligned
        - does not work with only one TX deskriptor
        - standard reset method does not work
      
      * Patch by Masami Komiya, 08 Dec 2003:
        add RTL8139 ethernet driver
      
      * Patches by Ed Okerson, 07 Dec 2003:
        - fix ethernet for the AU1x00 processors in little-endian mode.
        - extend memsetup.S for the AU1x00 processors in BE and LE modes
      63f34912
    • wdenk's avatar
      * Cleanup lowboot code for MPC5200 · d4ca31c4
      wdenk authored
      * Minor code cleanup (coding style)
      
      * Patch by Reinhard Meyer, 30 Dec 2003:
        - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
        - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
        - turned debug print of PHY registers into a function (called in two places)
        - added support for EMK MPC5200 based modules
      
      * Fix MPC8xx PLPRCR_MFD_SHIFT typo
      
      * Add support for TQM866M modules
      
      * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
      
      * Fix a few compiler warnings
      d4ca31c4
  10. 28 Dec, 2003 1 commit
  11. 27 Dec, 2003 2 commits
    • wdenk's avatar
      Cleanup · a2f34be7
      wdenk authored
      a2f34be7
    • wdenk's avatar
      * Make CPU clock on ICA-IP board controllable by a "cpuclk" · 7cb22f97
      wdenk authored
        environment variable which can set to "100", "133", or "150". The
        CPU clock will be configured accordingly upon next reboot. Other
        values are ignored. In case of an invalid or undefined "cpuclk"
        value, the compile-time default CPU clock speed will be used.
      
      * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
        window that is used to access the UART registers by the Linux driver)
      
      * Patch by Reinhard Meyer, 20 Dec 2003:
        Fix clock calculation for the MPC5200 for higher clock frequencies
        (above 2**32 / 10 = 429.5 MHz).
      7cb22f97
  12. 20 Dec, 2003 1 commit
  13. 12 Dec, 2003 1 commit
  14. 09 Dec, 2003 8 commits
  15. 08 Dec, 2003 1 commit
  16. 07 Dec, 2003 6 commits
    • wdenk's avatar
      * Patch by Pierre Aubert, 24 Nov 2003: · 9fd5e31f
      wdenk authored
        - add a return value for the fpga command
        - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
          is defined. If ide_preinit fails, ide_init is aborted.
        - fix an endianess problem in fat.h
      9fd5e31f
    • wdenk's avatar
      Patch by Wolter Kamphuis, 05 Dec 2003: · 3bbc899f
      wdenk authored
      Add support for SNMC's QS850/QS823/QS860T boards
      3bbc899f
    • wdenk's avatar
      * Patch by Yuli Barcohen, 3 Dec 2003: · b028f715
      wdenk authored
        "revive" U-Boot support for old Motorola MPC860ADS board
      
      * Patch by Cam(ilo?), 03 Dec 2003:
        make examples build even with broken Montavista objcopy
      
      * Patch by Pavel Bartusek, 27 Nov 2003:
        fix conversion problem with "bootretry" evironment variable
      b028f715
    • wdenk's avatar
      * Patch by Andre Schwarz, 24 Nov 2003: · b4676a25
      wdenk authored
        add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
      
      * Patch by Pavel Bartusek, 21 Nov 2003:
        set ZMII bridge speed on 440
      
      * Patch by Anders Larsen, 17 Nov 2003:
        Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
      b4676a25
    • wdenk's avatar
      * Patches by David Mller, 14 Nov 2003: · a2663ea4
      wdenk authored
        - board/mpl/common/common_util.c
          * implement support for BZIP2 compressed images
          * various cleanups (printf -> puts, ...)
        - board/mpl/common/flash.c
          * report correct errors to upper layers
          * check the erase fail and VPP low bits in status reg
        - board/mpl/vcma9/cmd_vcma9.c
        - board/mpl/vcma9/flash.c
          * various cleanups (printf -> puts, ...)
        - common/cmd_usb.c
          * fix typo in comment
        - cpu/arm920t/usb_ohci.c
          * support for S3C2410 is missing in #if line
        - drivers/cs8900.c
          * reinit some registers in case of error (cable missing, ...)
        - fs/fat/fat.c
          * support for USB/MMC devices is missing in #if line
        - include/configs/MIP405.h
        - include/configs/PIP405.h
          * enable BZIP2 support
          * enlarge malloc space to 1MiB because of BZIP2 support
        - include/configs/VCMA9.h
          * enable BZIP2 support
          * enlarge malloc space to 1MiB because of BZIP2 support
          * enable USB support
        - lib_arm/armlinux.c
          * change calling convention of ARM Linux kernel as
            described on http://www.arm.linux.org.uk/developer/booting.php
      
      * Patch by Thomas Lange, 14 Nov 2003:
        Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
        support all these AMD boards.
      
      * Patch by Thomas Lange, 14 Nov 2003:
        Workaround for mips au1x00 physical memory accesses (the au1x00
        uses a 36 bit bus internally and cannot access physical memory
        directly. Use the uncached SDRAM address instead of the physical
        one.)
      a2663ea4
    • wdenk's avatar
      * Patch by Xue Ligong (Joe), 13 Nov 2003: · ef5a9672
      wdenk authored
        add Realtek 8019 ethernet driver
      
      * Patch by Yuli Barcohen, 13 Nov 2003:
        MPC826xADS/PQ2FADS  cleanup
      
      * Patch by Anders Larsen, 12 Nov 2003:
        Update README to mark the PORTIO commands non-standard
      ef5a9672
  17. 06 Dec, 2003 4 commits
    • wdenk's avatar
      * Patch by Nicolas Lacressonnire, 12 Nov 2003: · 5779d8d9
      wdenk authored
        update for for Atmel AT91RM9200DK development kit:
        - support for environment variables in DataFlash
        - Atmel DataFlash AT45DB1282 support
      
      * Patch by Jeff Carr, 11 Nov 2003:
        add support for new version of 8270 processors
      
      * Patches by George G. Davis, 05 Nov 2003:
        - only pass the ARM linux initrd tag to the kernel when an initrd
          is actually present
        - update omap1510inn configuration file
      5779d8d9
    • wdenk's avatar
      * Patches by Stephan Linz, 3 Nov 2003: · 8bf3b005
      wdenk authored
        - more endianess fixes for LAN91C111 driver
        - CFG_HZ configuration patch for NIOS Cyclone board
      
      * Patch by Stephan Linz, 28 Oct 2003:
        fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
      
      * Patch by Steven Scholz, 20 Oct 2003:
        - make "mii info <addr>" show infor for PHY at "addr" only
        - Endian fix for miiphy_info()
      8bf3b005
    • wdenk's avatar
      * Patch by Gleb Natapov, 19 Sep 2003: · a8c7c708
      wdenk authored
        Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
      
      * Patch by Anders Larsen, 17 Sep 2003:
        Bring ARM memory layout in sync with the documentation:
        stack and malloc-heap are now located _below_ the U-Boot code
      a8c7c708
    • wdenk's avatar
      Accelerate booting on TRAB board: read and check autoupdate image · fa1399ed
      wdenk authored
      headers first instead of always reading the whole images.
      fa1399ed