1. 26 Mar, 2008 1 commit
  2. 16 Jan, 2008 2 commits
  3. 10 Jan, 2008 1 commit
  4. 08 Jan, 2008 1 commit
  5. 25 Nov, 2007 1 commit
  6. 18 Nov, 2007 1 commit
  7. 19 Oct, 2007 1 commit
  8. 15 Sep, 2007 1 commit
  9. 16 Aug, 2007 2 commits
    • Andy Fleming's avatar
      Don't wait for disconnected TSECs · 7613afda
      Andy Fleming authored
      
      
      The TSEC driver's PHY code waits a long time for autonegotiation to
      complete, even if the link is down.  The PHY knows the link is
      down or up before autonegotiation completes, so we can short-circuit
      the process if the link is down.
      Signed-off-by: default avatarAndy Fleming <afleming@freescale.com>
      7613afda
    • Andy Fleming's avatar
      Define tsec flag values in config files · 3a79013e
      Andy Fleming authored
      
      
      The tsec_info structure and array has a "flags" field for each
      ethernet controller.  This field is the only reason there are
      settings.  Switch to defining TSECn_FLAGS for each controller
      in the config header, and we can greatly simplify the array, and
      also simplify the addition of future boards.
      Signed-off-by: default avatarAndy Fleming <afleming@freescale.com>
      3a79013e
  10. 14 Aug, 2007 1 commit
  11. 09 Aug, 2007 2 commits
  12. 05 Aug, 2007 1 commit
  13. 03 Aug, 2007 1 commit
  14. 11 Jul, 2007 3 commits
  15. 09 Jul, 2007 1 commit
  16. 03 Jul, 2007 1 commit
  17. 16 May, 2007 1 commit
  18. 15 May, 2007 1 commit
  19. 05 May, 2007 1 commit
  20. 02 May, 2007 1 commit
  21. 24 Apr, 2007 1 commit
  22. 02 Mar, 2007 1 commit
    • Paul Gortmaker's avatar
      mpc83xx: U-Boot support for Wind River SBC8349 · 91e25769
      Paul Gortmaker authored
      I've redone the SBC8349 support to match git-current, which
      incorporates all the MPC834x updates from Freescale since the 1.1.6
      release,  including the DDR changes.
      
      I've kept all the SBC8349 files as parallel as possible to the
      MPC8349EMDS ones for ease of maintenance and to allow for easy
      inspection of what was changed to support this board.  Hence the SBC8349
      U-Boot has FDT support and everything else that the MPC8349EMDS has.
      
      Fortunately the Freescale updates added support for boards using CS0,
      but I had to change spd_sdram.c to allow for board specific settings for
      the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
      default if the board doesn't specify a value.)
      
      Hopefully this should be mergeable as-is and require no whitespace
      cleanups or similar, but if something doesn't measure up then let me
      know and I'll fix it.
      
      Thanks,
      Paul.
      91e25769
  23. 04 Nov, 2006 2 commits
    • Timur Tabi's avatar
      mpc83xx: Add support for the MPC8349E-mITX · 2ad6b513
      Timur Tabi authored
      
      
      PREREQUISITE PATCHES:
      
      * This patch can only be applied after the following patches have been applied:
      
        1) DNX#2006090742000024 "Add support for multiple I2C buses"
        2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
        3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
        4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
        5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
      
      CHANGELOG:
      
      * Add support for the Freescale MPC8349E-mITX reference design platform.
        The second TSEC (Vitesse 7385 switch) is not supported at this time.
      Signed-off-by: default avatarTimur Tabi <timur@freescale.com>
      2ad6b513
    • Nick Spence's avatar
      Added RGMII support to the TSECs and Marvell 881111 Phy · f484dc79
      Nick Spence authored
      
      
      Added a phy initialization to adjust the RGMII RX and TX timing
      Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
      Signed-off-by: default avatarNick Spence <nick.spence@freescale.com>
      f484dc79
  24. 26 Oct, 2006 1 commit
  25. 12 Oct, 2006 1 commit
  26. 10 Oct, 2006 1 commit
  27. 19 Sep, 2006 1 commit
    • Andy Fleming's avatar
      Add support for eTSEC 3 & 4 on 8548 CDS · 09f3e09e
      Andy Fleming authored
      * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
        This will only work on rev 1.3 boards (but doesn't break older boards)
      * Cleaned up some comments to reflect the expanded role of tsec
        in other systems
      09f3e09e
  28. 27 Jun, 2006 1 commit
  29. 26 Apr, 2006 1 commit
  30. 31 Mar, 2006 1 commit
  31. 12 Mar, 2006 1 commit
  32. 28 Oct, 2005 1 commit
  33. 13 Oct, 2005 1 commit
  34. 21 Sep, 2005 1 commit