1. 25 Apr, 2012 1 commit
  2. 02 Apr, 2012 1 commit
    • Daniel Schwierzeck's avatar
      MIPS: fix endianess handling · 6cb461b4
      Daniel Schwierzeck authored
      Make endianess of target CPU configurable. Use the new config
      option for dbau1550_el and pb1000 boards.
      Adapt linking of standalone applications to pass through
      endianess options to LD.
      Build tested with:
       - ELDK 4 mips_4KC- and mips4KCle
       - Sourcery CodeBench Lite 2011.03-93
      With this patch all 26 MIPS boards can be compiled now in one step by
      running "MAKEALL -a mips".
      Signed-off-by: default avatarDaniel Schwierzeck <daniel.schwierzeck@googlemail.com>
  3. 29 Mar, 2012 1 commit
  4. 26 Mar, 2012 1 commit
  5. 27 Feb, 2012 3 commits
    • prabhakar.csengg@gmail.com's avatar
      dm6467Tevm: Use a common configuration file for davinci_dm6467evm and davinci_dm6467Tevm · fda9c20c
      prabhakar.csengg@gmail.com authored
      In commit 2d575e46
       a separate header
      file was introduced for the DM6467T EVM, include/configs/davinci_dm6467Tevm.h.
      The substantial difference between the davinci_dm6467evm and the
      davinci_dm6467Tevm configuration is a single bit in the hardware revision
      that is passed to the Linux kernel and davinci_dm6467evm has
      REFCLK_FREQ = 27000000 where as davinci_dm6467Tevm.h has a
      REFCLK_FREQ = 33000000.
      This patch removes include/configs/davinci_dm6467Tevm.h. Instead the
      include/configs/davinci_dm6467evm.h configuration is used for DM6467T EVMs and
      in boards.cfg.
      Signed-off-by: default avatarPrabhakar Lad <prabhakar.csengg@gmail.com>
      Cc: Tom Rini <trini@ti.com>
    • Hadli, Manjunath's avatar
      da850evm: read mac address from I2C EEPROM on AM18x EVM · 206a1038
      Hadli, Manjunath authored
      add support to read mac address for AM18x EVM manufactured from
      Spectrum digital which have mac address stored in I2C EEPROM manufactured
      by WINBOND. This patch reads mac address from I2C EEPROM and sets the
      environment variable if not set, If mac address is already present in
      environment compare it with the mac address in EEPROM and warn on
      mismatch.Introduced a config option CONFIG_MAC_ADDR_IN_EEPROM to where
      to look for the mac address.
      Signed-off-by: default avatarManjunath Hadli <manjunath.hadli@ti.com>
      Cc: Tom Rini <trini@ti.com>
      Cc: Mike Frysinger <vapier@gentoo.org>
      Cc: Wolfgang Denk <wd@denx.de>
    • Hadli, Manjunath's avatar
      da850evm: add support to read mac address from SPI flash · 38fed6ee
      Hadli, Manjunath authored
      add support to read mac address for da850/L138 evm manufactured by
      Logic PD which store mac address in SPI flash manufactured by ST
      Microelectronics. This patch adds support to read mac address from
      SPI flash and set the mac address if it hasn't been set in environment,
      If it has been set in the environment it compares the value one with
      SPI flash and warns on mismatch. Introduced a config option
      CONFIG_MAC_ADDR_IN_SPIFLASH indicating where to look mac address for.
      Signed-off-by: default avatarManjunath Hadli <manjunath.hadli@ti.com>
      Cc: Tom Rini <trini@ti.com>
      Cc: Mike Frysinger <vapier@gentoo.org>
      Cc: Wolfgang Denk <wd@denx.de>
  6. 12 Feb, 2012 12 commits
  7. 16 Jan, 2012 4 commits
  8. 13 Jan, 2012 1 commit
  9. 10 Jan, 2012 2 commits
  10. 24 Dec, 2011 3 commits
  11. 19 Dec, 2011 1 commit
  12. 12 Dec, 2011 1 commit
  13. 10 Dec, 2011 4 commits
  14. 09 Dec, 2011 4 commits
    • Jason Liu's avatar
      i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board · 76d7f574
      Jason Liu authored
      Add the initial support for Freescale i.MX6Q Armadillo2 board
      Support: MMC boot from slot 0/1, debug UART(UART4), usdhc.
      There is two MMC slots on the boards:
      mmc dev 0 -> connect USDHC3 -> the lower slot on the board,
      mmc dev 1 -> connect USDHC4 -> the upper slot on the board,
      Signed-off-by: default avatarJason Liu <jason.hui@linaro.org>
      Cc: Stefano Babic <sbabic@denx.de>
      Tested-by: default avatarDirk Behme <dirk.behme@de.bosch.com>
    • Chander Kashyap's avatar
      S5PC2XX: Rename S5pc2XX to exynos · 393cb361
      Chander Kashyap authored
      As per new naming convention for Samsung SoC's, all Cortex-A9 and Cortex-A15
      based SoC's will be classified under the name Exynos. Cortex-A9 and Cortex-A15
      based SoC's will be sub-classified as Exynos4 and Exynos5 respectively.
      In order to better adapt and reuse code across various upcoming Samsung Exynos
      based boards, all uses of s5pc210 prefix/suffix/directory-names are renamed in
      this patch. s5pc210 is renamed as exynos4210 and S5PC210/s5pc210 suffix/prefix
      are renamed as exynos4/EXYNOS4.
      Signed-off-by: default avatarChander Kashyap <chander.kashyap@linaro.org>
      Signed-off-by: default avatarMinkyu Kang <mk7.kang@samsung.com>
    • Stephen Warren's avatar
      tegra2: Add support for Ventana · d5ef19b9
      Stephen Warren authored
      Ventana is a board which is very similar to Seaboard. Support it by
      re-using board/nvidia/seaboard/seaboard.c with minor run-time conditionals.
      v5: Makefile: Use cmd_link_o_target, remove unused clean/distclean targets.
      v6: Make gpio_config_uart_seaboard() static.
      v7: Add MAINTAINERS entry for Ventana. Tom Warren doesn't have Ventana, so
          he asked me to add myself for this board.
      Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      Signed-off-by: default avatarTom Warren <twarren@nvidia.com>
    • Kyle Moffett's avatar
      mpc85xx: Add board support for the eXMeritus HWW-1U-1A devices · f8bbb4da
      Kyle Moffett authored
      The eXMeritus HWW-1U-1A unit is a DO-160-certified 13lb 1U chassis
      with 3 independent TEMPEST zones.  Two independent P2020 computers may
      be found inside each zone.  Complete hardware support is included.
      High-level hardware overview:
        * DO-160 certified for passenger aircraft (noncritical)
        * TEMPEST ceritified for RED/BLACK separation
        * 3 zones per chassis, 2 computers per zone (total of 6)
        * Dual-core 1.066GHz P2020 per computer
        * One 2GB DDR2 SO-RDIMM module per computer (upgradable to 4GB)
        * Removable 80GB or 160GB Intel X18-M SSD per computer
        * Front-accessible dual-port E1000E per computer
        * Front-accessible serial console per computer
        * Front-accessible USB port per computer
        * Internal Gigabit crossover within each TEMPEST zone
        * Internal unidirectional fiber links across TEMPEST zones
        * Battery-backed DS1339 I2C RTC on each CPU.
      Combined, each 13lb 1U chassis contains 12GB RAM, 12 cores @ 1.066GHz,
      12 front-accessible Gigabit Ethernet ports and 960GB of solid-state
      storage with a total power consumption of ~200W.
      Additional notes:
        * SPD detection is only known to work with the DO-160-certified DIMMs
        * CPU reset is a little quirky due to hardware misfeature.  Proper
          support for the hardware reset mechanism has been left for a later
          patch series to address.
      Signed-off-by: default avatarKyle Moffett <Kyle.D.Moffett@boeing.com>
      Cc: Andy Fleming <afleming@gmail.com>
      Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
  15. 08 Dec, 2011 1 commit