1. 04 Sep, 2011 18 commits
  2. 08 Aug, 2011 1 commit
  3. 04 Aug, 2011 1 commit
  4. 03 Aug, 2011 1 commit
  5. 28 Jul, 2011 2 commits
  6. 26 Jul, 2011 2 commits
  7. 17 Jul, 2011 1 commit
    • Mingkai Hu's avatar
      powerpc/p2041rdb: Add p2041rdb board support · 4f1d1b7d
      Mingkai Hu authored
      P2041RDB Specification:
      -----------------------
      Memory subsystem:
       * 4Gbyte unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
       * 128 Mbyte NOR flash single-chip memory
       * 256 Kbit M24256 I2C EEPROM
       * 16 Mbyte SPI memory
       * SD connector to interface with the SD memory card
      
      Ethernet:
       * dTSEC1: connected to the Vitesse SGMII PHY (VSC8221)
       * dTSEC2: connected to the Vitesse SGMII PHY (VSC8221)
       * dTSEC3: connected to the Vitesse SGMII PHY (VSC8221)
       * dTSEC4: connected to the Vitesse RGMII PHY (VSC8641)
       * dTSEC5: connected to the Vitesse RGMII PHY (VSC8641)
      
      PCIe:
       * Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT1
       * Lanes C and Land D of Bank2 are connected to one x4 PCIe SLOT2
      
      SATA: Lanes C and Land D of Bank2 are connected to two SATA connectors
      
      USB 2.0: connected via a internal UTMI PHY to two TYPE-A interfaces
      
      I2C:
       * I2C1: Real time clock, Temperature sensor, Memory module
       * I2C2: Vcore Regulator, 256Kbit I2C Bus EEPROM, PCIe slot1/2
      
      UART: supports two UARTs up to 115200 bps for console
      Signed-off-by: default avatarMingkai Hu <Mingkai.hu@freescale.com>
      Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
      4f1d1b7d
  8. 11 Jul, 2011 2 commits
  9. 07 Jul, 2011 1 commit
  10. 01 Jul, 2011 1 commit
  11. 22 Jun, 2011 1 commit
  12. 01 Jun, 2011 1 commit
  13. 19 May, 2011 1 commit
  14. 12 May, 2011 3 commits
  15. 28 Apr, 2011 1 commit
    • Timur Tabi's avatar
      video: parse the video-mode environment variable · a5dbdc81
      Timur Tabi authored
      Add function video_get_video_mode(), which parses the "video-mode" environment
      variable and returns each of its components.  The format matches the video=
      command-line option used for Linux:
      
      	video-mode=<driver>:<xres>x<yres>-<depth>@<freq><,option=string>
      
      	<driver> The video driver, ignored by U-Boot
      	<xres> The X resolution (in pixels) to use.
      	<yres> The Y resolution (in pixels) to use.
      	<depth> The color depth (in bits) to use.
      	<freq> The frequency (in Hz) to use.
      	<options> A comma-separated list of device-specific options
      Signed-off-by: default avatarTimur Tabi <timur@freescale.com>
      a5dbdc81
  16. 13 Apr, 2011 2 commits
  17. 10 Apr, 2011 1 commit