1. 23 Jun, 2003 1 commit
  2. 22 Jun, 2003 1 commit
    • wdenk's avatar
      * Patch by Rune Torgersen, 4 Jun 2003: · 3595ac49
      wdenk authored
        add large memory support for MPC8266ADS board
      
      * Patch by Richard Woodruff, 19 June 03:
        - Enabled standard u-boot device abstraction for ARM
        - Enabled console device for ARM
        - Initilized bi_baudrate for ARM
      
      * Patch by Bill Hargen, 23 Apr 2003:
        fix byte order for 824x I2C addresses (write op)
      3595ac49
  3. 21 Jun, 2003 1 commit
  4. 20 Jun, 2003 2 commits
  5. 19 Jun, 2003 4 commits
    • wdenk's avatar
      * Patch by Richard Woodruff, 19 June 03: · 0b97ab14
      wdenk authored
      - Fixed smc91c111 driver to sync with the u-boot environment (driver/smc91c111.c).
      - Added eth_init error return check in NetLoop (net/net.c).
      0b97ab14
    • wdenk's avatar
      Patches by Murray Jensen, 17 Jun 2003: · 6dd652fa
      wdenk authored
      - Hymod board database mods: add "who" field and new xilinx chip types
      - provide new "init_cmd_timeout()" function so code external to
        "common/main.c" can use the "reset_cmd_timeout()" function before
        entering the main loop
      - add DTT support for adm1021 (new file dtt/adm1021.c; config
        slightly different. see include/configs/hymod.h for an example
        (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
        CFG_DTT_ADM1021 defined)
      - add new "eeprom_probe()" function which has similar args and
        behaves in a similar way to "eeprom_read()" etc.
      - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
        function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
      - gdbtools copyright update
      - ensure that set_msr() executes the "sync" and "isync" instructions
        after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
      - 8260 I/O ports fix: Open Drain should be set last when configuring
      - add SIU IRQ defines for 8260
      - allow LDSCRIPT override and OBJCFLAGS initialization: change to
        config.mk to allow board configurations to override the GNU
        linker script, selected via the LDSCRIPT, make variable, and to
        give an initial value to the OBJCFLAGS make variable
      - 8260 i2c enhancement:
        o correctly extends the timeout depending on the size of all
          queued messages for both transmit and receive
        o will not continue with receive if transmit times out
        o ensures that the error callback is done for all queued tx
          and rx messages
        o correctly detects both tx and rx timeouts, only delivers one to
          the callback, and does not overwrite an earlier error
        o logic in i2c_probe now correct
      - add "vprintf()" function so that "panic()" function can be
        technically correct
      - many Hymod board changes
      6dd652fa
    • wdenk's avatar
      Patches by Robert Schwebel, 14 Jun 2003: · 52f52c14
      wdenk authored
      - add support for Logotronic DL datalogger board
      - cleanup serial line after kermit binary download
      - add debugX macro (debug level support)
      - update mach-types.h to latest arm.linux.org.uk master list.
      52f52c14
    • wdenk's avatar
      * Patches by David Mller, 12 Jun 2003: · 48b42616
      wdenk authored
        - rewrite of the S3C24X0 register definitions stuff
        - "driver" for the built-in S3C24X0 RTC
      
      * Patches by Yuli Barcohen, 12 Jun 2003:
        - Add MII support and Ethernet PHY initialization for MPC8260ADS board
        - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
          configuration word supplied by FPGA on some MPC8260ADS boards
      
      * Patch by Pantelis Antoniou, 10 Jun 2003:
        Unify status LED interface
      48b42616
  6. 18 Jun, 2003 1 commit
  7. 16 Jun, 2003 1 commit
    • wdenk's avatar
      * Patch by Nicolas Lacressonniere, 11 Jun 2003: · 2abbe075
      wdenk authored
        Modifications for Atmel AT91RM9200DK ARM920T based development kit
        - Add Atmel DataFlash support for reading and writing.
        - Add possibility to boot a Linux from DataFlash with BOOTM command.
        - Add Flash detection on Atmel AT91RM9200DK
          (between Atmel AT49BV1614 and AT49BV1614A flashes)
        - Replace old Ethernet PHY layer functions
        - Change link address
      
      * Patch by Frank Smith, 9 Jun 2003:
        use CRIT_EXCEPTION for machine check on 4xx
      
      * Patch by Detlev Zundel, 13 Jun 2003:
        added implementation of the "carinfo" command in cmd_immap.c
      2abbe075
  8. 15 Jun, 2003 1 commit
    • wdenk's avatar
      * Fix CONFIG_NET_MULTI support in include/net.h · 71f95118
      wdenk authored
      * Patches by Kyle Harris, 13 Mar 2003:
        - Add FAT partition support
        - Add command support for FAT
        - Add command support for MMC
        ----
        - Add Intel PXA support for video
        - Add Intel PXA support for MMC
        ----
        - Enable MMC and FAT for lubbock board
        - Other misc changes for lubbock board
      71f95118
  9. 06 Jun, 2003 1 commit
  10. 05 Jun, 2003 3 commits
  11. 04 Jun, 2003 1 commit
  12. 03 Jun, 2003 1 commit
    • wdenk's avatar
      * Patches by Udi Finkelstein, 2 June 2003: · 682011ff
      wdenk authored
        - Added support for custom keyboards, initialized by defining a
          board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
        - Added support for the RBC823 board.
        - cpu/mpc8xx/lcd.c now automatically calculates the
          Horizontal Pixel Count field.
      
      * Fix alignment problem in BOOTP (dhcp_leasetime option)
        [pointed out by Nicolas Lacressonnire, 2 Jun 2003]
      
      * Patch by Mark Rakes, 14 May 2003:
        add support for Intel e1000 gig cards.
      
      * Patch by Nye Liu, 3 Jun 2003:
        fix critical typo in MAMR definition (include/mpc8xx.h)
      
      * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
      
      * Patch by Klaus Heydeck, 2 Jun 2003
        Minor changes for KUP4K configuration
      682011ff
  13. 31 May, 2003 1 commit
    • wdenk's avatar
      * Patch by Marc Singer, 29 May 2003: · 7a8e9bed
      wdenk authored
        Fixed rarp boot method for IA32 and other little-endian CPUs.
      
      * Patch by Marc Singer, 28 May 2003:
        Added port I/O commands.
      
      * Patch by Matthew McClintock, 28 May 2003
        - cpu/mpc824x/start.S: fix relocation code when booting from RAM
        - minor patches for utx8245
      
      * Patch by Daniel Engström, 28 May 2003:
        x86 update
      
      * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
        add nand flash support to SXNI855T configuration
        fix/extend nand flash support:
        - fix 'nand erase' command so does not erase bad blocks
        - fix 'nand write' command so does not write to bad blocks
        - fix nand_probe() so handles no flash detected properly
        - add doc/README.nand
        - add .jffs2 and .oob options to nand read/write
        - add 'nand bad' command to list bad blocks
        - add 'clean' option to 'nand erase' to write JFFS2 clean markers
        - make NAND read/write faster
      
      * Patch by Rune Torgersen, 23 May 2003:
        Update for MPC8266ADS board
      7a8e9bed
  14. 30 May, 2003 1 commit
  15. 28 May, 2003 1 commit
    • wdenk's avatar
      * Fix data abort exception handling for arm920t CPU · f07771cc
      wdenk authored
      * Fix alignment problems with flash driver for TRAB board
      
      * Patch by Donald White, 21 May 2003:
        fix calculation of base address in pci_hose_config_device()
      
      * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
        execute "cmd2", even if "cmd1" fails. Note that this is different
        to "run var1 var2" where the contents of "var2" will NOT be
        executed when a command in "var1" fails.
      f07771cc
  16. 23 May, 2003 4 commits
  17. 22 May, 2003 1 commit
    • wdenk's avatar
      * Patch by Dave Ellis, 22 May 2003: · 5d232d0e
      wdenk authored
        Fix problem with only partially cleared .bss segment
      
      * Patch by Rune Torgersen, 12 May 2003:
        get PCI to work on a MPC8266ADS board; incorporate change to
        cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
      5d232d0e
  18. 21 May, 2003 1 commit
  19. 20 May, 2003 4 commits
  20. 18 May, 2003 1 commit
  21. 12 May, 2003 1 commit
  22. 03 May, 2003 2 commits
    • wdenk's avatar
    • wdenk's avatar
      * Add support for Promess ATC board · 7aa78614
      wdenk authored
      * Patch by Keith Outwater, 28 Apr 2003:
        - Miscellaneous corrections and additions to GEN860T board specific code.
        - Added GEN860_SC variant to GEN860T.
        - Miscellaneous corrections to GEN860T documentation.
        - Correct duplicate entry in U-Boot CREDITS file.
        - Add GEN860T_SC entry in MAINTAINERS file.
        - Update CREDITS file with GEN860T_SC info.
      
      * Update Smiths Aerospace addresses in MAINTAINERS file
      
      * Fix error handling in hush's version of "run" command
      7aa78614
  23. 27 Apr, 2003 1 commit
    • wdenk's avatar
      * LWMON extensions: · 4532cb69
      wdenk authored
        - Splashscreen support
        - modem support
        - sysmon support
        - temperature dependend enabling of LCD
      
      * Allow booting from old "PPCBoot" disk partitions
      
      * Add support for TQM8255 Board / MPC8255 CPU
      4532cb69
  24. 20 Apr, 2003 2 commits
    • wdenk's avatar
      *** empty log message *** · 02c9bed4
      wdenk authored
      02c9bed4
    • wdenk's avatar
      * Make sure Block Lock Bits get cleared in R360MPI flash driver · d791b1dc
      wdenk authored
      * MPC823 LCD driver: Fill color map backwards, to allow for steady
        display when Linux takes over
      
      * Patch by Erwin Rol, 27 Feb 2003:
        Add support for RTEMS (this time for real).
      
      * Add support for "bmp info" and "bmp display" commands to load
        bitmap images; this can be used (for example in a "preboot"
        command) to display a splash screen very quickly after poweron.
      
      * Add support for 133 MHz clock on INCA-IP board
      d791b1dc
  25. 12 Apr, 2003 1 commit
    • wdenk's avatar
      * Patch by Lutz Dennig, 10 Apr 2003: · 4a6fd34b
      wdenk authored
        Update for R360MPI board
      
      * Add new meaning to "autostart" environment variable:
        If set to "no", a standalone image passed to the
        "bootm" command will be copied to the load address
        (and eventually uncompressed), but NOT be started.
        This can be used to load and uncompress arbitrary
        data.
      
      * Set max brightness for MN11236 displays on TRAB board
      4a6fd34b
  26. 10 Apr, 2003 1 commit