GitLab

Patch by Stefan Roese, 2 Aug 2005

Patch by Stefan Roese, 2 Aug 2005

Patch by Stefan Roese, 2 Aug 2005

Patch by Stefan Roese, 01 Aug 2005

Patch by Steven Blakeslee, 27 Jul 2005

* fix alignment of NAND size
* make code do what the comment says

The code is provided for, and was tested on, the Yukon/Alaska
and PM520 boards only.

A bug in flash_real_protect() for the Yukon board was fixed by adding
a function that tells if two banks are on one flash chip.

This fixes a problem of displaying bogus voltages when the voltages
are so low that the I2C devices start failing while the rest of the
system keeps running.

[Patch by Cedric Vincent, 6 Jul 2005]

Add missing PCI IO port definitions.

author Kumar Gala <kumar.gala@freescale.com> Wed, 20 Jul 2005 15:39:52 -0500
committer Jon Loeliger <jdl@freescale.com> Wed, 20 Jul 2005 15:39:52 -0500

A new, Windows compatible init sequence was also backported from Linux 2.6,
but disabled with #undef NEW_INIT_SEQ as it wouldn't change the behaviour
of the memopry sticks we tested. Maybe it's not relevant for mass storage
devices. For recerence, see file common/usb.c, function usb_new_device(),
section #ifdef NEW_INIT_SEQ.

"erase $(addr) +$(filesize)", i. e. a size argument can be used and
U-Boot will automaticially find the end of the corresponding sector.

  Update uc100 board PHY setup

  Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code

  Fix PHY address for CATcenter board (now correct!)

  Fix PHY addresses for PPChameleon and CATcenter boards
  Change MAINTAINER for most esd boards

* Add MPC8220 boards to MAKEALL script

* Add EEPROM and RTC support for HMI1001 board

* Patch by Detlev Zundel, 20 Jun 2005:
  Fix initialization of low active GPIO pins on inka4x0 board

  Initialize allocated dev and private hw structures
  after their respective allocation in 440gx_enet.c

* Patch by Steven Scholz, 10 Jun 2005:
  Fix byteorder problems with second argument of "bootm" with
  standalone images;

* Disable "date" and "sntp" commands on TQM866M which has no RTC

Add support for Funkwerk VoVPN gateway module.

  (0 = infinite)

* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
  those boards that use it.

add support for the OpenGear CM4008 board

add support for the OpenGear CM4008 board

  add support for the KS8695P (ARM 922 based) CPU

* Patch by Steven Scholz, 19 May 2005:
  Add support for CONFIG_SERIAL_TAG on ARM boards

Code cleanup (especially Sorcery / Alaska / Yukon serial driver).

make port pins to trigger logic analyzer configurable

* Add support for MPC8247 based "IDS8247" board.