1. 21 Aug, 2009 6 commits
  2. 18 Aug, 2009 2 commits
  3. 10 Aug, 2009 1 commit
  4. 09 Aug, 2009 2 commits
  5. 08 Aug, 2009 1 commit
  6. 07 Aug, 2009 1 commit
  7. 03 Aug, 2009 1 commit
  8. 30 Jul, 2009 2 commits
  9. 29 Jul, 2009 4 commits
  10. 28 Jul, 2009 4 commits
    • Wolfgang Denk's avatar
      TQM8xx* boards: set larger SMC Rx buffer len · 3cb7a480
      Wolfgang Denk authored
      Commit 2b3f12c2
       added support for configurable SMC Rx buffer length on
      8xx systems. Enable this feature on TQM8xx* based boards.
      This fixes the problem that pasting text in the middle of a line
      (i. e. inserting in edit mode) did not work - only the first two
      characters got inserted, the rest was lost.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
    • Tom Rix's avatar
      TWL4030 Add power reset button · cd782635
      Tom Rix authored
      The Zoom2 power reset button is on the top right side of the
      main board.  Press and hold for about to 8 seconds to completely
      reset the board.
      Some of the beta boards have a hardware problem that prevents
      using this feature.  If is difficult to further characterize the
      boards that fail.  So disable resetting for all beta boards.
      The Zoom1 reset button is the red circle on the top right,
      front of the board.  Press and hold the button for 8 seconds to
      completely reset the board.
      After analyzing beagle, it was determined that other boards
      that use the twl4030 for power managment can also make use
      this function.
      The resetting is done by the power management part of the twl4030.
      Since there is no existing drivers/power, add one.
      The compilation of power/twl4030.h is controlled by the config
      variable CONFIG_TWL4030_POWER
      Signed-off-by: default avatarTom Rix <Tom.Rix@windriver.com>
      Acked-by: default avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
      Acked-by: default avatarHeiko Schocher <hs@denx.de>
    • Stefan Roese's avatar
      ppc4xx: Kilauea: Fix SDRAM init in NAND booting version · 5b34691f
      Stefan Roese authored
      DDR2 Auto-calibration needs to be disabled on the NAND booting PPC4xx
      targets. Otherwise the configured fixed init values for some DDR2
      controller registers (e.g. RQDC) are not initialized at all resulting
      in a non working SDRAM.
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
    • Dirk Eibach's avatar
      ppc4xx: Add GDsys CompactCenter board support. · ab4c62c1
      Dirk Eibach authored
      Board support for the Guntermann & Drunck CompactCenter and
      Based on the AMCC Canyonlands board support by Stefan Roese.
      Signed-off-by: default avatarDirk Eibach <eibach@gdsys.de>
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
  11. 27 Jul, 2009 4 commits
  12. 26 Jul, 2009 2 commits
  13. 24 Jul, 2009 10 commits