1. 27 Jan, 2016 2 commits
  2. 07 Dec, 2015 2 commits
  3. 18 Aug, 2015 1 commit
  4. 26 Jan, 2015 2 commits
  5. 21 Jan, 2015 1 commit
  6. 14 May, 2014 2 commits
    • Michal Simek's avatar
      ARM: zynq: Fix building SPL without FPGA support · 0b680206
      Michal Simek authored
      When CONFIG_FPGA is defined but CONFIG_SPL_FPGA is not, the build fails:
      board.c: In function 'board_init':
      board.c:41:3: error: 'fpga' undeclared (first use in this function)
         fpga = fpga010;
      
      Fix this by expanding the "#if.." around this block to match the other
      FPGA checks and don't compile this block when buildign for SPL without
      FPGA support.
      
      Tested a bootloader that had CONFIG_FPGA defined without CONFIG_SPL_FPGA,
      this now compiles without errors and loading FPGA from u-boot works.
      Signed-off-by: default avatarMike Looijmans <mike.looijmans@topic.nl>
      Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
      0b680206
    • Michal Simek's avatar
      ARM: zynq: Remove sparse warnings · 5b73caff
      Michal Simek authored
      Warnings:
      board/xilinx/zynq/board.c:17:13: warning: symbol 'fpga' was not declared. Should it be static?
      board/xilinx/zynq/board.c:20:13: warning: symbol 'fpga010' was not declared. Should it be static?
      board/xilinx/zynq/board.c:21:13: warning: symbol 'fpga015' was not declared. Should it be static?
      board/xilinx/zynq/board.c:22:13: warning: symbol 'fpga020' was not declared. Should it be static?
      board/xilinx/zynq/board.c:23:13: warning: symbol 'fpga030' was not declared. Should it be static?
      board/xilinx/zynq/board.c:24:13: warning: symbol 'fpga045' was not declared. Should it be static?
      board/xilinx/zynq/board.c:25:13: warning: symbol 'fpga100' was not declared. Should it be static?
      board/xilinx/zynq/board.c:120:5: warning: symbol 'board_mmc_init' was not declared. Should it be static?
      Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
      5b73caff
  7. 13 May, 2014 1 commit
  8. 04 Mar, 2014 1 commit
  9. 19 Feb, 2014 3 commits
  10. 06 Feb, 2014 1 commit
  11. 10 Jan, 2014 1 commit
  12. 14 Oct, 2013 1 commit
  13. 12 Aug, 2013 3 commits
  14. 24 Jul, 2013 1 commit
  15. 06 May, 2013 1 commit
  16. 30 Apr, 2013 4 commits
  17. 04 Oct, 2012 1 commit
  18. 05 Oct, 2009 1 commit
  19. 12 Jun, 2008 1 commit
    • Becky Bruce's avatar
      Change initdram() return type to phys_size_t · 9973e3c6
      Becky Bruce authored
      This patch changes the return type of initdram() from long int to phys_size_t.
      This is required for a couple of reasons: long int limits the amount of dram
      to 2GB, and u-boot in general is moving over to phys_size_t to represent the
      size of physical memory.  phys_size_t is defined as an unsigned long on almost
      all current platforms.
      
      This patch *only* changes the return type of the initdram function (in
      include/common.h, as well as in each board's implementation of initdram).  It
      does not actually modify the code inside the function on any of the platforms;
      platforms which wish to support more than 2GB of DRAM will need to modify
      their initdram() function code.
      
      Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
      MPC8641HPCN.
      Signed-off-by: default avatarBecky Bruce <becky.bruce@freescale.com>
      9973e3c6
  20. 10 Oct, 2004 1 commit
    • wdenk's avatar
      Patches by Scott McNutt, 24 Aug 2004: · 5c952cf0
      wdenk authored
      - Add support for Altera Nios-II processors.
      - Add support for Psyent PCI-5441 board.
      - Add support for Psyent PK1C20 board.
      5c952cf0
  21. 08 Dec, 2003 1 commit
  22. 07 Nov, 2003 1 commit
  23. 29 Oct, 2003 1 commit
    • wdenk's avatar
      * Prepare for release · 5fa66df6
      wdenk authored
      * Fix problems in memory test on some boards (which was not
        non-destructive as intended)
      
      * Patch by Gary Jennejohn, 28 Oct 2003:
        Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
        to prevent stack overflow on ARM systems
      5fa66df6
  24. 11 Sep, 2003 1 commit
    • wdenk's avatar
      * Patch by Gary Jennejohn, 11 Sep 2003: · a43278a4
      wdenk authored
        - allow for longer timeouts for USB mass storage devices
      
      * Patch by Denis Peter, 11 Sep 2003:
        - fix USB data pointer assignment for bulk only transfer.
        - prevent to display erased directories in FAT filesystem.
      
      * Change output format for NAND flash - make it look like for other
        memory, too
      a43278a4
  25. 31 Aug, 2003 1 commit
    • wdenk's avatar
      Patch by Yuli Barcohen, 7 Aug 2003: · 326428cc
      wdenk authored
      According to the MPC8260 User's Manual, PCI_MODE signal should be
      reflected in SCCR register, and local bus pins configuration is taken
      from HRCW and appears in SIUMCR. For some reason it does not work
      this way, so the only possibility to detect if the board is
      configured in PCI mode is to check the BCSR. This patch sets SCCR and
      SIUMCR according to the BCSR.
      326428cc
  26. 28 Aug, 2003 1 commit
  27. 17 Aug, 2003 1 commit
    • wdenk's avatar
      * Make Ethernet autonegotiation on INCA-IP work for all clock rates; · e0ac62d7
      wdenk authored
        allow selection of clock frequency as "make" target
      
      * Implement memory autosizing code for IceCube boards
      
      * Configure network port on INCA-IP for autonegotiation
      
      * Fix overflow problem in network timeout code
      
      * Patch by Richard Woodruff, 8 Aug 2003:
        Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
      e0ac62d7
  28. 17 Jul, 2003 1 commit
    • wdenk's avatar
      * Patch by Martin Krause, 17 Jul 2003: · 2535d602
      wdenk authored
        add delay to get I2C working with "imm" command and s3c24x0_i2c.c
      
      * Patch by Richard Woodruff, 17 July 03:
        - Fixed bug in OMAP1510 baud rate divisor settings.
      
      * Patch by Nye Liu, 16 July 2003:
        MPC860FADS fixes:
        - add MPC86xADS support (uses MPC86xADS.h)
        - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
          o PLPRCR changes
          o BRG changes (EXTAL/XTAL restricted to 10MHz)
          o don't trust gclk() software measurement by default, depend on
            CONFIG_8xx_GCLK_FREQ
        - add DRAM SIMM not installed detection
        - use more "correct" SDRAM initialization sequence
        - allow different SDRAM sizes (8xxADS has 8M)
        - default DER is 0
        - remove unused MAMR defines from FADS860T.h (all done in fads.c)
        - rename MAMR/MBMR defines to be more consistent. Should eventually
          be merged into MxMR to better reflect the PowerQUICC datasheet.
      
      * Patch by Yuli Barcohen, 16 Jul 2003:
        support new Motorola PQ2FADS-ZU evaluation board which replaced
        MPC8260ADS and MPC8266ADS
      2535d602
  29. 16 Jul, 2003 1 commit